Відео

Thank you, none of the other videos mentioned the Vaseline

seems a bit low to the ground for a security camera, in my opinion.....

My very first knife, and i still have it. For the cheap cost, it served me very well. I was thinking of one of those LMNF ones to try out. Anyone here used one?

Bought the pack, pretty good knives the maroon one is the best.

4:20 Stopped watching after this point. Imagine if the blade was in it 😂

While it's cheap and the steel is seriously lacking but the Air ranger is a damn solid knife.

Just wait until after xmax, they will mark them down to 7 dollars a pack.

Best EDC I ever owned. I keep it on the factory settings, and yes it’s very Bright. It will give an assailant a good blast of night Blindness enough to go for your EDC Gun or Pepper spray. It’s also a great Dog walking Light, cause of the 90 Angle, you can hold the leash and light in the same hand, and make use of that momentary feature.

I'm somewhat a collector. I got away from buying D2 knives, unless they're really special. That said, a cheap knife that you're not worried about damaging if something comes up has it's advantages.

Great video, but for Pete's sake get rid of the horrible background music!

I wondered about leaving internal batteries...Great job sharing the important things

5:30 speculating that the motor won’t cool sufficiently with the side flap closed is ignoring that the tool is designed to have adequate ventilation in any mode. Air is required to exit the rear if you desire and using the side flap alters that.

That’s a nice lil light duty pry bar

Wrong blade for angles and put some shoes on😂

Do you have a part number on the hardline main connection?

Where can I find the “hardline” Main connection

IMO Chinese can do better than this: as e.g. those Mutitools made by Great Star... Ozark Trail premium 18 in 1, Swisstech 18 in 1, Bibury, Mossy Oak, Daicamping... they are all better than Wave because internally they are inverted, so they don't pinch the palm in the middle while loosing grip. with a 6mm magnet hack they also accomodate whatever ¼hex bit or accessory... with no hassle of proprietary bits. Harbor Freight is indeed a great dealer but... about this tool... it is a straight copy of the Wave with all the Wave defects and limits...only the price is the point in this deal. But this is probably destined for those narrow minded searching for a cheaper back-up alternative of what they already know. I'm not into Leatherman's. I have my Victorinox SvisstoolXplus (with ratchet) to count on. If eventually I need a beater cheaper multitool to loose around or to mistreat or just in case... perhaps I will go for a Swisstech 18 in 1 (the older model flush satin sacales similar to this...)

Thank you for the video. We just removed one from a kitten after watching your video. The Vaseline worked great. It took about 30 minutes but it finally came to the surface. There was only the one.

Looks like you are working hard, but not getting results. Well, I think I might help with that. Let me know if you need a CTO for your channel.

How to clean the blade

Why bother giving a review if you can’t be bothered reading the instructions before hand ? The Operators Manual clearly states what the 2 positions of the blower switch are for under the heading ”Blower shuttle”. should I insult other viewer’s intelligence by reiterating it here ? The cross-in-square position is for when you attach a vacuum cleaner to the tool … so that the dust is not blown away instead of remaining available to be sucked up.

NOW seeing the BOTTOM fitting leaking I will make a logical guess on WHY you were NOT getting gas to the RV with the original setup, I'd guess the original was leaking at that SAME location thus maybe tripping the regulator to the safe OFF position

That home made spray bottle was worth the view

Can you get that same regulator WITH the OLD fittings? I'd bet if you screwed those brass fitting OUT of the new regulator the old fittings wold of fit, BTW I found pipe dope to NOT be the best, the tape wrap is

NPT???? or MPT????

7:46 I like that setup, gonna buy one of those to use with TWO 100 Lb tanks for a generator setup

I see lots of reviews on Lowes with people having issues with the PID controller not maintaining temp, are you having similar issues?

Thanks, good information think you covered all the bases.

2 years late to the party, but I've had the same problem with the same generator. If your generator runs on propane and not gas, it's most likely a stuck solenoid. When you flip the fuel switch from propane to gas, the solenoid opens and lets gas into the carburetor. If your battery is dead, the solenoid can't open, but it will run on propane. Most likely, all you had to do was remove the solenoid and clean it. Other than that, mine has been rock solid.

The Gordan’s features resemble a leatherman charge more than a wave.

Bro stop biting your nails 😂

Not a ground, thats your power going in to alt

Amazing, you dont know all most all of the chargers/cube/(the thing that plugs into 115 ac to charge) IS/ARE USB-A.

Big thanks!

I just saw this for $88 in Walmart. Had to check some reviews just to be sure. I’m definitely getting one.

👍 “Their hands-on demonstration was really helpful. Seeing the travel kit in use really helps viewers understand how it functions in real-life scenarios.”

The one thing that is gonna make me not buy this one is you can see that small gap at the very bottom witch causes it to not be able to cut any type of wirer or zip to fully unless you move it up to the cutters

I have had the Gordon for 2 weeks now, my 2 leatherman kicks are over 20 years old now and are used all the time - one on my belt and one in my electrical tool box - both leatherman still work great with no broken parts and still shines, however the Gordon is already showing rust spots which is strange because here in north Texas we have had at most 1/2 inch of rain the last 2 months, I did use the Gordon to open a couple of bags of pool shock the other day but I have used the leatherman to open those bags many times over the years. Other than the rust spots the Gordon seems like a nice multitool but no way as good as leatherman.

Sir I saw a video about a hidden lanyard ring?

Very informative for all who do not have professional experience. Thank you

Leatherman wave is just as fucking good

It worked! Followed step by step! Thank you! 👩🏼‍💻🩷

Brah 😂

The strap is for below your knee

some cables are power delivery only. they do not have the data cables in them to allow them for data transfer.

My regulator took a crap on me, aftermarket one i installed. only a couple years old..... It was fine when i had the gas open but when i turned off both tanks the regulator failed to regulate after i switched them back on. The one that crapped on me is the new one you ordered.... ****Edit*****, turns out i just tripped the leak protection because i drained the system to work on my furnace and when i turned it back on i opened the valve too fast and the leak protection was triggered, stopping flow. The regulator still works.

This helped me so much Thank You

Just moved into my first apartment this looks perfect for it

Mine broke trying to remove it. I'm fked.

does it engine light came on?