Відео

It didn’t need much, an alternative is cut a little ring out the pipe to shorten it and then weld it together. Some pipes don’t need modifications though from what I’ve heard. Also just look on aliexpress for it all, much cheaper and tbh better then Amazon or something. For example I got a pipe bracket, gasket, screws and bolts the slip on fake branding like akropovic etc all for $100 Canadian shipped, then my friend got one from Amazon and he got literally the pipe, and slip on with the springs to hold it to the pipe. That’s it, and he paid like $150-$170 Canadian for still a week wait. Also to fill the empty back end I got a wider tire. I didn’t bend my exhaust tighter to the bike which i probably should but getting a fatter rear tire and a nicer rear fender helps a ton.

I didn’t test the difference for sliders vs rollers as I don’t have the proper roller weights to match the sliders I have. But I do run sliders with the mod and have since the Navi first released almost and I’ve had zero issues ever with it.

I originally did this 2 years ago, this video was filmed using a spare variator from my friends Navi. The top speed gain was maybe 2-3 mph if I had to guess but I’m unsure as it was forever ago and I’ve driven more on a variator modded like this then a stock one.

thank you!!! I've been too busy to make videos lately :( next planned one is the longer cvt belt which i have just haven't tested or filmed anything.

The rear one is the only one changed, it a Kendra k413 130/70R10 52J. I did it to fill the empty space after removing the oem exhaust and fender. For the front there is the Kendra k413 110/70-12

Any gy6 exhaust will fit or need very very little modification to fit. It was doing flames bc the bike was running lean, don’t run it lean tho. It’ll cost you power and just all around isn’t the best for the engine. For exhaust just go on aliexpress and search gy6 exhaust. Insanely cheap there, go look at some of my recent videos to see my bikes exhaust this was my friends.

Answered your other comment :)

this was based off his tunes yes. i did have issues when trying to drive from a stop but can't remember if i ever fixed that. join the discord linked on ms4x.net incase you haven't btw.

@@silas.anderson ill do it right now, i just flashed the DME with a tune based on his setup, but my iddle bounces at the cold start

@@GHenry-et2ix check o2 sensors, i had struggles with that too ended up saying whatever and only enabling 1 o2 sensor 😢

wider tire for sure, idk about height tho. i only got it for more width to fill the empty look in the back after removing the oem fender and exhaust.

thank you!!!!!

no sadly, i did contact the manufacturer and they did give me a date when they'd hope to start selling a mph version. i don't remember when it was exactly but it was mid to late summer i believe NavX is also working on trying to figure out how to make it use MPH which he's done some eprom related things to make it work or at least possibly make it work, theyre also working on a ton of other navi related things like bigger fuel tank too.

Thanks!!!! I was going to look into it but haven’t had much of a chance lately.

THERE IS AN ODOMETER!!!!! idk if i updated in these comments or not but it does. it has a odometer and a trip meter!!!!! btw join the subreddit and navi performance group im super super active in there helping literally everyone i can. i also do a lot more frequent updates there since its easier then a whole video.

Sadly no, there used to be a guy who made them for people forever ago but your best bet is to make your own or just fork out the money for a yoshi ir other exhaust.

what you'd like to know? i made these myself. start by looking at how to flash ms43 or ms42 depending on what due your car has. then look on ms4x.net and follow the pops section. also join the discord on there and theres a lot of people who can help you there. you do need catless headers or no flames and only pops

Thank you! Hopefully soon there’s a mph version, I talked to the Chinese seller/manufacturer and they said they’re working on it and they gave me a time roughly but I forget it rn. Only issue rn for the dash is it’s hard to see in the day, hopefully that gets fixed too. Also for the headlight I’m unsure, it was found at an Amazon return store for like $2 so I decided why not. Any led headlight that I believe is h4 should work. (Double check if it is a h4 bulb in the Navi I could be wrong)

It’s weird having so many people know who I am from being just a random teenager with a Navi 😂 but thank you sm. I try my best to help literally anyone on here, Reddit or Facebook.

Thank you :)

Thank you sm again!!!

I like it, just dim in sunlight but at night I love it. Also tbh I don’t really watch my speed on it at all 😅

I don’t know, I’m assuming not but at worst that’s a $5 fix. Sorry for not knowing.

I sadly no longer have a GoPro, I was borrowing it from my friend but in the future I might be able too. Also haven’t rode my Navi in a bit because it keeps drying then snowing and going from +15c to -10c so I’m unsure rn on the neutral light.

Yes I did ac to dc, I now have a led light too which I did far after the video was uploaded. Also hopefully it works out. I never got any solid tests between oem and not and with rollers or sliders and what weights but I personally get better top speed with this then a s23 variator by a good amount. I’m also from canada in Alberta. I agree the price for the Navi is amazing especially to easily get a license. Check out my other videos btw I got a lot more too.

no problem lol, i have to so i can get a good audience too anyways.

What parts would you be interested in? So much to list. If you want some specific I can get links too

@@silas.anderson just the performance parts I got the clutch and variatior replaced on mine but after an exhaust change idk what else other than a carb I could do to it

If done right no, first attempt at this I did much worse and rougher job then in the video and it still worked for thousands of miles until I got a new variator for this video. Basically just keep it even as possible and don’t make it insanely thin other then just maybe the edges of the variator so it doesn’t break when spinning. But I’m now at 7k kms on my Navi and it’s been fine and I’ve ran this mod since nearly new when the Navi first released.

@silas.anderson Thanks, bro scooter swap shop just restocked the s23 variator/ clutch kit, and I think that's my next move.

@@huntboy7038 don't get their kits, its over priced imo. their variator is worse for top speed from testing my hem one and the s23 one i have. for clutch just buy a gy6 1255-150cc clutch and clutch bell and you're good. got my clutch for $50 canadian and im still using the oem clutch bell. try this mod in the future, its not as hard as it looks and i was super worried the first time i did but even without this mod id say stay with oem or maybe go malossi variator but even then idk if its worth the extra money. i just don't recommend the s23 personally.

No problem, hope it goes well for you. The original variator is better for top speed then aftermarket ones I found.

no other people are working on it. it requires eprom editing so the physical chips on the board

i have no idea, seems just a accurate as the oem one though as my top speed didn't increase or decrease.

@@silas.anderson how is it during the daytime?

@@cool_breeze_actual9643little hard to see sadly. But at night and stuff I love it.

I’m in that group already. I probably should tho. I’m the one who won the banner photo or whatever they called it. Same one used as my channel banner.

What is HNPG

@@anthonybowling131 Honda Navi Performance group

go look at my walk around video ;) I think I already have that size. might do a 12" rim next but want a cdi first probably and a few other little things ill show off in a very soon video.

That’s fair, I just thought I’d try it out and modernize the Navi a bit more yk. Also no videos done on it so wanted to be the first to bring new content to the Navi in forever.

I can’t remember what it is. But I belive 32 pilot and 84 main, I’m higher in elevation and I still feel like it’s not dialed in but it’s the best I’ve gotten so far. Sadly might’ve messed up my cvt or carb tuning which is why I haven’t gotten a good video on my true top speed yet but hopefully this summer.

No this is a complete exhaust, if you look in the description I have 2 links. One is my first exhaust setup that came with pipe, bracket, and new slip on/muffler. I had to bend the pipe a little bit more to fit at one of the already existing bends but other then that it fits fine. This video I showed me getting just a new slip on/muffler but using the old pipe from my first setup. Hope this helps you. If you search gy6 exhaust on aliexpress, there’s a ton of options, you can find bundles of pipes mufflers and everything for $100 ish Canadian like I originally had and individual parts to make your own too and end up with what I’m running in this video now.

It won’t remember mileage as the mileage is stored mechanically in the old dash with that “roll over” type of system if that makes sense and not stored electronically as a value somewhere. And I’m the day time it does get hard to see at least the little I rolled it out on my driveway because of the snow. People might be working on solutions for it though.

Thank you!

I am not sure, couldn’t drive it other then a few meters since there’s still tons of snow outside where I live but it might be the trip style sadly, people are working on editing the eeprom to get mph working and a few other things so in the future it migh be possible to change possibly.

thanks man!

no problem, sadly had so many delays on this video it took a extra 3-4 days almost

Hey something’s not right with mine, it’s not showing in km/h it just sits at 0 and it’s not showing the highbeam icon, also I don’t think the fuel gauge is accurate. Anything you could think of? I de-pinned and followed everything exact to the T

@@PAXWITDASAX did you make sure the connector was orientated the correct way? check you speed cable as the wiring doesn't handle the speed for sure. if everything's good you might've just got unlucky sadly with the unit. message me on reddit, ill gladly try to help, same user name and i believe i already commented on your post there.

no problem, glad to help

thank you very much, i appreciate it!

hey nice to see another canadian rider. im from alberta. sadly no more riding until next year though.

ya this was my second time doing it, my first time looked awful but still worked great. sadly there's snow where i live now but it melted. might go for a final top speed run tom to hopefully get proof of my claimed 110kmh

nvermind i seen the othe comment

@@pizzabaker7586 yep just amazon im in canada so finding it listed was hard but on amazon.com its way more common from when i did buy it. i did have to space out the fender though from hitting the shock on the other side as they shipped mine missing the 3rd metal arm piece so i only got 2.

thank you 😂

yep my bad.

oh you are right!!! my bad, i have a ton of pics of cars and made this really fast while i was bored at work. i was naming them off the top of my head.

turns out i got it confused with another picture of an actual one-77 i did see.

Thank you very much.