- 17
- 49 372
ABICAB Musical Instruments
Canada
Приєднався 10 чер 2010
AbiCab custom build guitar and bass cabinet from scratch and also pimping your existing cabinet with your own style and finishing touches with no compromises! Made in Canada
RESTORING A RARE Trace Elliot 3x12 Cab and A OUT OF THIS WORLD UPGRADE Part 2 of 3
RESTORING A RARE Trace Elliot 3x12 Cab and Building a Custom 1x15 Unique Cab
If you have any questions or inquiries don’t be shy!
What i’m using for this build
- 3/4 baltic plywood
- Lepage Premium PL glue
- Craftman 10 inch tablesaw
- 8 inch skillsaw
- Jig saw
- 12 inch square
- Clamps lots of clamps
- Black & Decker 1/4 inch router
- Porter Cable 1/2 inch router
- Round circle router jig
- Mastercraft Orbital sander
- 60/80/150/220 grit sand paper
- CA glue and spray hardener
- Pencil - EastWing hammer
- 1/4 inch T-nuts (for the speakers
- Custom 3d printed sanding wedge
If you have any questions or inquiries don’t be shy!
What i’m using for this build
- 3/4 baltic plywood
- Lepage Premium PL glue
- Craftman 10 inch tablesaw
- 8 inch skillsaw
- Jig saw
- 12 inch square
- Clamps lots of clamps
- Black & Decker 1/4 inch router
- Porter Cable 1/2 inch router
- Round circle router jig
- Mastercraft Orbital sander
- 60/80/150/220 grit sand paper
- CA glue and spray hardener
- Pencil - EastWing hammer
- 1/4 inch T-nuts (for the speakers
- Custom 3d printed sanding wedge
Переглядів: 145
Відео
Reveal of my Custom Alperious Pickguard for my Fender SquireJazz Bass
Переглядів 65Рік тому
Reveal of my Custom Alperious Pickguard for my Fender SquireJazz Bass
RESTAURATION OF A TRACE ELLIOT PRE-AMP CASE AND CABINET, WITH GATOR VINYL
Переглядів 4402 роки тому
Restauration or like i say pimped into a badass case for a Trace Elliot GPSM7 130 Bass pre-amp plus a look at the cabinet that i am fixing and prepping for it’s new skin. Will be done in part 2 available now.
PIMP MY CAB #1 HER REATION IS PRICELESS!!
Переглядів 1882 роки тому
My friend gave me the white card to do what ever i wanted to do to pimp her cabinet for her ukulele, she said release your artistic vibes in this project! So i did!! Asked a few questions and voilà! Got any questions like and comment And if your interested on purchasing some of my builds check out my store on Etsy: www.etsy.com/ca-fr/shop/AbiCab Social Media Facebook : Abi-Cab-inst...
How to build a bass guitar cabinet
Переглядів 9 тис.2 роки тому
How to build a strong and sturdy bass guitar cabinet. I build this out of 3/4 baltic plywood, finger jointed and glued . The inside edge are all siliconed and insulated to prevent bad vibrations,1x12 inch Celestion vintage 30 speaker with crossover and tweeter, watch the other videos to see, how i recovered it tolex . If you like this video like and subscribe and ring the bell to find out more ...
HOW TO INSTALL TOLEX WITH NICE CORNERS, no talking
Переглядів 23 тис.2 роки тому
How to install tolex vinyl with nice corners , this black western tolex is awesome , this is how i installed it, if you like this video or learned something, like and subscribe to my channel . Material used in video: - Rust-oleum Painter's touch 2X Ultra Cover , undercoat wood spray primer , 2 coats - 3M 77 Spray adhesive -, spray even coat on the 2 surfaces let it sit a few minutes so it not w...
Steaks de Wagyu sous vide, recette avec accompagnements
Переглядів 3192 роки тому
Steak de Wagyu “vache japonaise “ cuit sous vide avec asperges ail aneth et citron avec salade choux rouge . Excellent!!! Une expérience à vivre “ le meilleur steak au monde!! Expérience épique!!
CHALLENGE Poisson qui pue!!! Stinky Fish Challenge
Переглядів 4,6 тис.2 роки тому
Tout a commencé par un ami qui parlait de ce challenge là et a dit si vous m’apporter une canne je suis game d’en manger. Surströmming est un poisson fermenté qui sent très TRÈS mauvais Attention langue vulgaire!! Et les cœurs sensibles s’abstenir!!
Hitler en beau joualvère qu'une micro-distillerie va ouvrir.
Переглядів 405 років тому
Hitler perd ses moyens quand il viens à la conclusion qui à rien à faire avec eux, ils est trop tard le projet est lancé.
GO BIG OR GO DOWN
Переглядів 5110 років тому
6 feet tall and not bullet proof !!!this what happens when a tall guy tries to get in a small car/ c'est se qui arrive quand un grand gars entre dans une petite voiture , ne pas essayer sa à la maison!!
Hitler réagie a la démission de Sylvain et Yanick a Mine Bachelor
Переглядів 67910 років тому
Make your own Hitler video at downfall.jfedor.org/
Exploding ice shack(cabane à pêche qui explose au lac Long)
Переглядів 1,6 тис.12 років тому
Good way to get rid of your ice shack! Bonne facon de se débarassé de ca cabane!
Ski Doo Crash
Переглядів 57112 років тому
un petit montage fait sur le lacs Long à la fête des 40 ans de mon Ami!
KL Gold Air Blast #2 video caught on tape!!
Переглядів 2,9 тис.14 років тому
KL Gold Air Blast #2 video caught on tape!!
OMG thanks so much for showing this iam wraping a few mini heads and have never done this before
Make sure you overlap the tolex 1/2 inch witch i didn’t do with this one and shinked and now i have a gag
Hey dude do you still have those Vintage 30 speakers? They are 5.33 ohm right? Do you wanna sell them?
I do have 3 of them but wanted to to sell only with the combo cab, bit if the price is right that i can replace them before they go we can talk about it like we did on messenger
I got a question, how do you spray that adhesive without it making a sticky mess beyond the folds of the seames
i have a 3M Adhesive Remover or a piece of cardboard
Is that 77 spray?
Fantastic job. 👍
Hi dear, nice job ! Can you give the link to buy the fake aligator tolex ? Thank you.
No problems a soon as i get home i will get this for you ! Merci /thank you
Tolex gator link www.cafr.ebay.ca/itm/332730300369?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=w9S29vyGTRy&sssrc=4429486&ssuid=hyn55A7fS9O&var=&widget_ver=artemis&media=COPY
@@TheRoots72Thank you so much!!! But unfortunately I'm in Europe, shipping and customs are quite expensive...
Am sure if you google photo search the image of the tolex you can find it , je suis certain que tu va trouver mon ami
Looks great man! I have a question tho. Do you feel that it would’ve been easier to apply the back first, using the same method you used for the sides, and then fold the sides around it? Or was your plan to use the back tolex to cover the overlap from the sides?
Why is the plywood painted ?
I find the tolex bonds better and glue don’t seeps in plywood as much so it easier to remove years later to change tolex that’s why i use primer on the wood
@@TheRoots72 ah yes, good idea !!! What paint to use ??
I use rustolium 2x wood primer
Check in description for details it’s all there :)
how has the adhesive held up? I had an absolute glue failure using spray adhesive on my project.
It held good but shrank a bit ,next time i will leave a little overlap
Love it
Thank you very much!
OK so what you need to do is reveal what spray adhesive you are using as that little detail matters very much and you just left it out like it's some kind of common knowledge. It isn't. If it's contact cement or similar, you need to mention that both mating surfaces of the substrate should be sprayed not just one surface. You should also mention to wait a few minutes for the adhesive to tack up before applying the tolex to the cab. So next time maybe you should do some talking. This is an incomplete tutorial. Grade - C
thanks for the comment, if you check the description i have some details of what i used for this project
How 'bout a little gratitude for posting this tutorial instead of all the kvetching. Geez. Grade for the pointless criticism - F
@@TheDesern23 A+ for the gratitude ;)
He makes it very clear you coat both sides. Repeatedly. Even shows you how long to wait. Then every product used is in the video description... your grade is F- for attention, A+ for being a jackass.
Where do you get your black grill cloth. Need some for a amplifier
i get it here , sorry for the delay :) nextgenguitars.ca/categories/cab-case-parts/tolex-tweed.html
Nice to see all them hood strings hangin' about, absorbin' all the adhesive
What kind of glue is it? What brand? I mean glue in spray can.
I used the spray can 3M 77 spray adhesive and on the seems gorilla glue but next time i Will do a little overlap for shrinkage because it did open and peeled a little at some place
damn nice job my dude <3 look beautiful.
Thank you very much !!
Very Nice!😀
Thank you mister appreciated
If I send you guys a custom wood amp enclosure and roll of tolex could you wrap it for me?
I could do it for sure but it will cost lots for shipping i guess
@@TheRoots72 let’s talk, do you have an email or Instagram we can chat through?
What is the touch-up adhesive you apply here with the small brush?
It is gorilla superglue
@@TheRoots72 ah... ok. Thanks! I've tried patching overlaps with contact cement and it's frustrating at best! ps: in places where seams tend to shrink, I paint all those areas black before I begin. If it does separate later it's not so glaring.
Excellent. The title was exactly what I was looking for. I’m upholstering my pedalboard case, if it looks half as good as this I’ll be happy. Thank you for uploading!
One thing a would do is give a little overlap for shrinkage because it does
Beautiful job!
Thank you!
I have a problem with the corner seams opening up over time. No tolex kid loose, gust the gap. Think I’ll try a small over lap.
indeed mine did that too but i seams that certain tolex does shrink more than others , i will be doing this as well small overlap
nice! enjoy watching a craftsman who doesn't feel the need to be a "personality!"
Merci \thank you i know a Mike Ward and really funny guy c’est tu lui?
😂😂🤢🤮
looks great \,,/ . I have an Old Trace AH500X . I would love to do this to it .
You can do it am sure if not i can take a other project for you :)
Where can I purchase Tolex?
Ebay or Amazon as some but i do get mine from Next Gen Musical LTD.
What accent
French Canadian one ;)
Looks like you are in sweden?.. fun to look at you 👍🤪
Thank you :) but we are in Quebec not Sweden but sweden fish tho lol
@@TheRoots72 ahaa your nature around you looked like here so i thaught that you mayby where on holliday here.. keep going and take care.. Bon Apeti. 👍😁
What tools should I need for the job
The roller i use bought it for Home Depot store in the floor department used for wall paper and vinyl floors a scrapper to push in the inside corners, a olfa knife with new blade , a metal ruler and measuring tape is pretty much all you need for tools
New Title, "How to only build part of a bass guitar cabinet, just the wooden parts, no wiring the speaker and the crossover and the tweeter."
Man, you're safety practices on the table saw will shorten your life. Don't reach over a spinning blade. This will keep me up all night.
Great video. What spray adhesive did you use and also do you get any shrinkage with this adhesive?
I use the 3M number 77 spray and no shrinkage thanks for the comment really appreciated! :)
@@TheRoots72 thanks again for the reply! Legend
After a year it did shrink a little at some spots
@@TheRoots72 thanks for confirming that :)
Estie je sens jusqu'ici
Lol moi aussi encore
Merci pour cette vidéo c'est bin bon a regarder :P
de rien ca me fait plaisir!! :)
c'est tres facile si tu a un ipod touch ou i phone avec l'application action movie! :)
petit montage avec L'APP ipodtouch ActionMovie
c'est ca qu'on a faite aussi apres , mais le scoop lui a rester la faque j'ai pris mes jambes pis j'ai décalisser lol
moi sa aurait fait longtemps jaurais crissé mon camp jaurais pas resté la a filmer :P
regarder ca quand il y a de la pression dans la roche à mon ancienne place de travail , regarder c'est quoi ca fait! ce video et la'autre aussi, y a pas de son parce que c'est5 filmé avec mon kodak mais le son étais encore 100 fois plus explicite que ce qu'on voie la!
regarder ca quand il y a de la pression dans la roche à mon ancienne place de travail , regarder c'est quoi ca fait! ce video et la'autre aussi, y a pas de son parce que c'est5 filmé avec mon kodak mais le son étais encore 100 fois plus explicite que ce qu'on voie la!
regarder ca quand il y a de la pression dans la roche à mon ancienne place de travail , regarder c'est quoi ca fait! ce video et la'autre aussi, y a pas de son parce que c'est5 filmé avec mon kodak mais le son étais encore 100 fois plus explicite que ce qu'on voie la!