Відео

are you sure these spacers are right? the long ones go in the rear and the short in the front? I installed them like that per the instrux but it was obvious something was not right, so I switched the spacers and they fit much better with the long in the front and the short in the rear. Also, this using fuel line for the spacers is kinda chintzy. Maybe you should get some composite material spacers made, or 3D printed. I am currently considering doing that but that would mean removing those four screws again and not sure the block we are tapping into will take it so maybe I would just leave well enough alone. But if they came from the factory with some better spacers it would not look like this was a trailside fix. Otherwise, look to work pretty well so far anyhow.

Will these work with 37" tires on an Outerbanks w/ Sasquatch Package?

Ordered some looks fucking amazing.. missing 1 screw for rear flap. Found out after installing all others..im not dealing with the hassle of taking them all off, re-packaging/shipping them back to you for 1 screw.. just tell me specific dimensions so I can find one @ a hardware store.. I know hex head 3/8ths and length 1in. but whats the diameter/thickness of the thread? Thanks.

Awesome. Thank you! One small thing: I think you forgot to tighten the fourth bolt in the rear installation. Specifically, the lone screw furthest inside the wheel well.

How do you get in touch with this company? They don't even have a phone number. I need a replacement but .....

can you do this without the horrible music?

Just did this install on my 2023 yesterday. The self-tapping screws never feel like they really get snug when tightening. Hopefully, I will not be adjusting and retightening down the road.

flap out commercial

Where can I find the mudflaps for a 2023 bronco Outer Banks

Can't wait to get mine. Ordered yesterday the Merica red flag flaps for my Race Red 2020 F250 7.3 gas Godzilla. Ship ASAP. LOL😂. I'll do an install unboxing a d installation video if you guys want. TY.

installer dude most know somebody, he got the hex head self tapping screws.the phillips head self tapping screws everbody eise gets are tight fit. looks like nice quality.

Need a walk around bro!

Really great tutorial. I appreciate you posting it. Getting ready to order mine.

What size were these ?? Can seem to find any information on what sizes look and fit the best . 8 inch long by 11 wide ?

the printed directions dont talk about what to do with the large screw whatsoever other than that it goes on the front :/ only talks about which screw gets a spacer. Thanks for the video though!

that "bottom" clip doesn't actually reach even at an angle on the front flap, I spent an hour trying to make that work and it just wouldn't. The holes don't line up

What size tires are those and do they rub in the front when fully locked Turing

Harder than you made it look but it looks great after! Looks amazing on my 2020 sti

Whoever edit this video. Why the hell did you make it so dark? It's hard to see anything

Will these fit an sr model without stock fender flares?

Discout Code?

Wayyyy better than my video😂😂😂great work, thanks!

Is it only for OEM fenders or can it be mounted without fenders?

Will these fit a 22 trd off road? I have read some mud flaps dont fit the trd, pro or off road side exit exhaust.

Does this work for the 2gen?

very broad installation video, it would of been a lot nicer if you showed you putting the flap on and not it just randomly being there and showing where to screw in screws…..

No instructions in the box. SMH

Why are we whispering? Is this a secret mudflap instalation?

I would love to make a vid on a set for my channel truck check it out and see if you would be interested

What's the point of the l bracket if your not screwing anything into the bottom to secure it? Or are you putting the oem tab back in?

Not related to this video but since there isn’t a video for the Tacoma mud flaps I’ll ask here Can the 16+ Tacoma mud flaps fit with a larger than oem tire?

Bought these for my 2015 wrx none of the hardware on the back fit

Thank you!! Very helpful

Worst Video Ever

Awesome video bud it was alot of help 👍.

I install mine yesterday fronts very easy the rear mud flaps was a little tricky because my car comes with a small lip on the bumper but with patience they fit well too. I just want to say for the money plus they are good quality not bad at all thanks.

Thought it was mostly common sense.

Your instructions suck. I too, am confused about the L braket, do we pull the clip on the bottom, what the hell screws into what? You need to spend more time on the video , I will send these back to amazon

How does the most inner screw, the one that goes into the L bracket, fit? There’s no hole in the plastic that it goes into so it doesn’t screw into anything. I’m so confused on that part

crazy that this doesn't have more views. you guys genuinely make a great product on par with rally armor but nearly half the cost. im guessing with the advent of the new Subaru design in 2021 you'll see a lot more business. can't wait to buy a pair of your flaps.

Just purchased a new set of next gen. WRX. They look great but the instructions online don't match the new versions. Please update or release some install videos. Please. It's really disappointing there's nothing useful out there.

Anyone have the name of the song?

You need to make install video's for your products, there is literally nothing out there that I could find in regards to installing these on a 2019 WRX :/