Відео

Thank you! Yeah it's crazy how many people tell me about them having this same issue. I guess I was the unlucky one and got it so long ago when the car was still newish. Thankfully it's a pretty cheap fix, just takes some work!

Sorry for the late reply! If the engine was out it would be much easier because you would be able to access the steering rack input without having to pull the rack out of the car!

@@kiku_sti4646 I worries and I used my insurance to cover the replacement and labor from Subaru so I just got my car back yesterday.

Part Number: 34191VA000 Supersession(s): 34191AG050 Sorry for the late reply! That's exactly when mine started doing it too!

@@kiku_sti4646 Thank you! No worries. I cant wait to get to it. Cant believe its been 4 weeks but its been getting worse lol.

It's kind of scary when you think about doing in yourself because you have to pull put the rack, but it's really not that bad! About a half day all together, and that was only because I was learning and trying to film as I was going. Thankfully yours is slow. Mine was fine one day, and empty with power steering wine the next morning 😂

@@kiku_sti4646 Nice! Thanks for the words of encouragement. I’ve been putting it off for too long but it’s time I get to it.

@@kiku_sti4646 just gave you a follow on IG 🙏🏽

At the time yes! Everything else was stock besides the muffler delete!

Part Number: 34191VA000 Supersession(s): 34191AG050 No snap ring pliers. They're press fit so you just tap them in!

Never a dumb question! There are two on the input shaft. Here is the part number: Part Number: 34191VA000 Supersession(s): 34191AG050

Stock headers...for now 😏

Must be covid causing a short 😂

Thank you! 🙏🏼 Haven't done too much dressing up yet! I will once I get an intake and front mount inter cooler!!

Yes! It was leaking from the dust seal on top but that is only where the fluid was coming out of. It was leaking from the seals under that dust cover. The dust cover should have no fluid inside of it and it is just there to stop the seals from getting dirt and stuff on them. Yes it is necessary to remove the rack. It sucks a little but that's the only say to get the seals out! It may seem a little daunting but it isn't that bad! Just take it slow and you'll be able to do it!

I agree! This was shot before I got my camera and mic so it was filmed on my phone 😂

I'm pretty sure I ordered it directly from them and I had no complaints! Came with a sticker and license plate frame which I was kind of shocked about. Shipping was also quite fast considering I'm in Florida and they're in Canada! (That was before 2020 fell apart though so I don't know how shipping is now) I can't speak on their customer service only because I didn't have to deal with them. I can say the welds, fitment, and sound are very very good though. I get a lot of compliments from people who think I have an entire exhaust system 😅 I hope that answers your question!

@@kiku_sti4646 thanks bro i just order mine 4 days ago but they showed 10 in stock but i haven’t recive any email about shipping btw i live in canada and you said you got yours with in 4 days or so

I would give them a should tomorrow when they are open! They will probably have some covid reasoning behind it which I guess is understandable. Hopefully you are able to get it pretty quickly! It is definitely worth the wait for sure though!

@@kiku_sti4646 okay thanks man

hey man one more question did u order it with the perrin hangers or not cuz i use the stock hangers and they're not perfectly align

It wasn't hard to put it back in, it is just difficult to film at the same time. Just use a punch that is the same size as the pin to keep all of the holes lined up and tap the pin in gently! It may take a time or two to get them all lined up but just take your time. It's pretty easy once you get it all lined up! If you have any other questions, let me know and I'll try my best to help! 🤙🏼

For me in Florida, shipping was about a week! Buuuuut that was before the world went all crazy so now it might be a little longer 😅 definitely worth it though! I love the sound and people think it's a full exhaust system all the time!

You'd be surprised they have these on amazon which took less than a week to come in

The piping is 2.5" mandrel bends and the tips are 3.5" single walled burnt tipped! I used the stock hangers as well!

@@kiku_sti4646 thank you.

This seal kit was for a wrx/sti. I'm not sure how many other Subarus it is for but I can look it up for you! What model and year car do you have?

Congrats! On the exhaust, and the 2020 STi! 👏🏼

Did you get the exhaust yet @mrntjh did it fit or did you have problems?

@@georgekorfiatis9876 I put it on like last week. It fits, sounds good.

Thanks for the reply!! I should be receiving mine today can’t wait. Was nervous about the fitment though.

Congrats bro! Let us know how it you like it!

I wish I knew.. mine did it out of nowhere for no particular reason. I think the seals are just weak from the factory. Plus the AWD doesn't help because it adds extra load to the power steering system.. 🤷🏻‍♂️

Yeah bro...sorry about the lighting lol. Bought a nice camera and lights so future videos will be a bit better! Thank you for the compliment and the comment! It was about 4-5 hours including filming. If everything comes off easy, should be 3-4! Let me know how your fix goes and let me know if you have any questions. You can message me on Instagram too if that's easier. I answer a bit quicker on there! @spacerally 🙏🏼

spacerally thank you bro. I’ll follow you on Instagram Forsure because i will have questions 😂

🤣 Thanks bro!🙏🏼

I used Valvoline Full Synthetic grease! You doing your install soon??

@@kiku_sti4646 Oh yeah I remember seeing that in the video, duh. Thank you. I'm installing one of these along with bushings in my 06 outback, I have about an inch of play any direction and if I'm going through the trouble, why not throw a short throw in?

Awesome brother! That's how mine was until one day, the shifter just fell down against the drive shaft.. thankfully it was just the two rear bolts that worked their way out. But I bought I used it as an excuse to buy a shifter 😅 go add me on insta so you can update me when you do yours! Just beware, the stiffer rear bushing is a bit louder inside. Some like it, some don't. I'm personally a fan of more sounds, makes me feel a little more like a race cay driver 🤣 let me know if you have any more questions! 🙏🏼

Thank you bro!🙏🏼

Thanks brother!

Thank's brother! Definitely easy, just take your time and it'll go smoothly!🤙🏼

😂 Definitely was a taaaad longer than they made it look! I will say though, it was very easy compared to some other installs I have done like the IAG AOS! Just a lot of going back and forth from under to in the car 🤣 Thank you for watching and let me know if you have any questions when you get to installing yours! Hope you like it!!🤙🏼

@@kiku_sti4646im installing mine now. I tried to do it without taking the crossmember out, that's not gonna work haha can't get the linkage to drop far enough

I tried the same thing 😂 I will say, trimming the heat shield was my favorite thing I did haha. I ended up pulling it back off to check torque and grease and it made it 10x easier without pulling the o2 sensor off again!

@@dru-music Did you get it installed?!

@@kiku_sti4646 i did, it is much louder in the cabin then i expected, even after i fixed the reverse lockout cable it is still really loud with those bushings

Thanks brother!🙏🏼

Now where is the ceramic video??

@@TTorres1183 it's out now...finally 😂

Snance

I stuck with the stock ones because mine were in good shape still! The fitment with the stock ones ended up perfect as well!

Whatever you do, don't ask her on a straight tequila night.

@@kiku_sti4646 heam

Thanks brother! Better quality in the next one! No more old gopro and phone video 😂

Squad🙏🏼

We ain't stopping now!💪🏼

Nice car Jim

In the criminal justice system, the people are represented by two separate, yet equally important, groups: the police, who investigate crime; and the district attorneys, who prosecute the offenders. These are their stories.

In the criminal justice system, sexually based offenses are considered especially heinous. In New York City, the dedicated detectives who investigate these vicious felonies are members of an elite squad known as the Special Victims Unit. These are their stories.

Much appreciated bro! Can't wait to hear your Type R exhaust, hopefully someday soon!🤙🏼

🙏🏼🔥 collab needs to happen soon for sure. Can't let the good weather go to waste! 🤙🏼

spacerally you already know!

Thanks brother! Good to see you again! I'm going to end up cleaning and oiling my engine's filter this weekend when I have the intake out for the IAG AOS Install! Content will really start flowing now. No more letting life slow me down from helping others out! You stay safe as well in this crazy world we're living in!

@@kiku_sti4646 good buy on the iag aos. Help yourself first, then others lol. Installing it isn't too hard just take your time good luck and make a video on it, a lot of people search for that on yt.

My leak came out of nowhere as well! Woke up one day to leave and when I started it, it immediately started whining and was a huge puddle under the car. You don't neeeed to get new cotter pins but I say better be safe than sorry so I swapped them. I personally didn't empty the reservoir and didn't make a huge mess but that may have been because of how much I lost. It also may have something to do with the pump being between the reservoir and the rack. That may not let fluid through it freely. Regardless, it was very easy and wasn't messy until I got it on the table for disassembly lol. Don't let my complicated video worry you, it's way easier than it seems! You got this! If you have any other questions or need any help, my instagram is spacerally and I respond a lot quicker on there!🤙🏼

Thank's brother! Your support really means a lot! 🙏🏼

Thank you so much! I will definitely sit down tonight and add the tools used in the description tonight! I didn't even think about that! Also, I did use a little ATF but forgot to mention it. Still new to this whole video thing so I've been learning along the way 😂 thank you for the advise and support!

Thanks for watching! I had no idea this was that big of an issue until seeing all of the comments!

Sweet! Just saw this after replying to your other comment! Glad they took care of you under warranty, as they should! Thank's for watching and supporting!

@@kiku_sti4646 yea man they gave me no trouble at all, i have the gold plus plan and it covered everything. Regardless, your video really helps for someone who had to do it themselves. Im glad i found it.

That's the way to go! Well I'll be putting out a bunch of videos in the future as I fund some more parts 😂 I really appreciate the support and I hope to see you in the next comment section!🔥

@@kiku_sti4646 looking foward to it man.

So glad to hear that! It was one of the first things I did because of how quiet it was stock. Hope you enjoy the lovely boxer rumble! Add me on Insta, I'll check out your new exhaust!

What do you insta And I will follow you

@@vatito5427 @spacerally

What’s you insta mine is @chanelthewrx

I've asked my neighbors and most can barely hear cold starts. And with the drone, honestly the only drone (if I can even call it that) is around 50mph or 80kmh. Highway speeds here in Florida are 70mph and it is surprisingly quiet. At 50mph, it's not really drone, more or less just louder. I had a mustang in the past that had ear wrenching drone and this has none of that!

And if you want I can try and do some filming from inside the car at certain speeds to show the sound!

@@kiku_sti4646 that would be awesome! I tried looking for muffler delete videos from inside the car on the highway and I couldn't find anything. This would be really useful

@@KyleBezemer I got you! I'll try and record it this week! Doing brakes pads and some vinyl work!👍

@@KyleBezemer I haven't forgot about you brother! Been super hectic with work and this whole virus thing. I will get a video made for you asap! If you can, follow my ig @spacerally. I may be able to record some short videos on there a lot quicker!

When I test drive mine after fixing my leak, my steering was one tooth off, it was so minor that I almost didn't even notice it. I pulled it back apart and moved it to the correct position and that was it. I'm not sure how any of that would be caused by the steering or alignment but I guess anything's possible. That sounds more like an abs or wheel speed sensor issue. I'm still learning these cars do I'm not 100% but I would start by trying to run a diagnostic scan to see if there are any issues! Best of luck!!

Did that happen after doing this repair? Sounds like you need a full all wheel alignment and speed sensor reset.

Yeah, it all happened after the repair so took it to get aligned and everything went back to normal, no leaks! Quick fix!

@@arturogalarza8451 nice, good to know, my turn now haha.

B P yeah you got this!🤙🏽