My Gen IV
My Gen IV
  • 33
  • 372 384
Front wheel hub assembly / hub bearing replacement, nissan altima
Replacement front wheel hub assembly
Tools needed:
10mm socket, ABS sensor bracket
9/16 wrench, brake caliper, 20ftlb torque
22mm socket, caliper bracket, 98ftlb torque
17mm socket, hub assembly bolts, 65ftlb torque
32mm socket, axle nut, 129ftlb torque
Socket wrench
Pliers
Jack stands
Hammer
Also needed:
Cotter pins X2
Переглядів: 666

Відео

CVT service, cooler filter, pan strainer, and axle seal replacement, nissan altima
Переглядів 13 тис.4 роки тому
Tools needed, Jack and jackstands Drip pan Rags Race and seal driver Hammer Channel lock pliers 10mm socket and wrench (recommend 1/4 drive) Socket swivel Parts needed, NS-2 transmission fluid, $130 www.ebay.com/itm/153885497483 Pan strainer and pan gasket, $19 shop.advanceautoparts.com/p/carquest-trans-filters-automatic-transmission-filter-kit-95262/11942719-p?c3ch=PLA&c3nid=11942719-P Cooler ...
2 Din Install, with steering wheel controls, SXM, Rev cam
Переглядів 8744 роки тому
Install double din kenwood radio, retain steering wheel controls, factory bose amp, reverse camera, SXM radio and retain factory antenna. Radio: Kenwood DDX26BT off Amazon $199.99, included 3x harnesses, radio, car, antenna SXM receiver SXV300v1 from eBay $39.95 20' SXM antenna cable extension XMFAN store $9.98 Steering controls SWI-CP2 from PAC on eBay $54.99 Bose amp retention kit x2 harnesse...
Polyurethane front lip install-nissan altima
Переглядів 3,7 тис.4 роки тому
Paint and install of "magic drift front lip nissan altima sedan" Tools used: Jack and jack stands Drill Self tapping screws (10 included with lip) Sand paper, 80, 120, 220, 400, and 800 grit Isopropyl alcohol Two sided tape Paint: Polyurethane primer "Touchupdirect" code QX3 3 step, color, mid coat, and clearcoat
Valve cover and gasket
Переглядів 1214 роки тому
Replace valve cover and gasket on 2012 Nissan Altima 2.5 Tools: Wrenches 18mm 16mm 10mm Sockets: 18mm 16mm 13mm 10mm 9/16" 3/4" Torque wrench in ft/lb 20lb to 80lb Torque wrench in in/lb 20 to 200 Pliers Pry bar Jack and Jack stands Silicone gasket maker Part # Valve cover, OEM Nissan 13264-JA00A Gasket, FEL-PRO, VS 50777 R Valve cover removal and instal: www.autozone.com/repairguides/Nissan-Ca...
Install axle back exhaust nissan altima
Переглядів 1,7 тис.4 роки тому
Install of "top speed pro 1 axle back exhaust" 2012 nissan altima 2.5l engine Tools needed, 5/8" wrench or deep socket 9/16" socket with 6" extension Link to product topspeedauto.com/nissan-altima-sedan-09-16-straight-pipe-axle-back-exhaust/
CV boot replacement, CV axle disassembly nissan altima
Переглядів 8 тис.4 роки тому
Tools needed Hammer Brass drift Snap ring pliers Flat screw driver Pliers Rags Boot part # Beck/Arnley 103-2968 Inner boot
Water pump removal and replacement, nissan altima 2.5
Переглядів 35 тис.4 роки тому
Water pump, nissan altima 2.5l 4cyl Tools needed 12mm socket 10mm socket 1/4 inch swivel 6" extension 14mm wrench 12mm wrench 10mm wrench Drip pan
YOU NEED TO WATCH THIS VIDEO TOO!!! CV axle torque specs nissan altima
Переглядів 2,1 тис.4 роки тому
If you watched the install video you need to watch this too, there is some important info here that was left out of the other video. 2012 nissan altima, 2.5L, CVT auto transmission Remove and install CV axles, driver and passenger side. !!! REMOVE NEGATIVE BATTERY LEAD BEFORE STARTING JOB REATTACH ONCE JOB IS COMPLETE !!! Computer needs to relearn once new axles are installed. Tools needed: Bre...
CV axle replacement, nissan altima
Переглядів 11 тис.4 роки тому
2012 nissan altima, 2.5L, CVT auto transmission Remove and install CV axles, driver and passenger side. !!! REMOVE NEGATIVE BATTERY LEAD BEFORE STARTING JOB REATTACH ONCE JOB IS COMPLETE !!! Computer needs to relearn once new axles are installed. Tools needed: Breaker bar Ratchet wrench 12" and 2" extension Hammer Center punch / alignment punch Channel lock pliers Sockets: 32mm 21mm 18mm 13mm W...
Airbag light flashing, nissan altima
Переглядів 84 тис.5 років тому
How to reset your airbag light, no tools needed
Radiator remove and replaced, charged A.C. with R134a, 2012 Nissan Altima
Переглядів 30 тис.6 років тому
Tools needed 10mm socket and wrench Flat tip screwdriver Cross tip screwdriver Vice grips, channel lock pliers I put 40psi in the AC system
Installation of aftermarket transmission cooler (inline) 2012 nissan altima
Переглядів 34 тис.6 років тому
Installation of aftermarket transmission cooler (inline) 2012 nissan altima
CVT fluid change 2012 nissan altima
Переглядів 23 тис.6 років тому
Tools needed 19mm wrench Funnel, drain pan, measuring cup 5 quarts NS2 CVT transmission fluid
Oil change with filter 2012 nissan altima
Переглядів 7 тис.6 років тому
Tools needed 9/16 wrench Flathead screwdriver Oil filter wrench Jackstands 13/16 socket and breaker bar
Painting calipers 2012 nissan altima
Переглядів 5346 років тому
Painting calipers 2012 nissan altima
Front brake pad change, also rotor removal. 2012 nissan altima
Переглядів 2916 років тому
Front brake pad change, also rotor removal. 2012 nissan altima
Removal of front wheel stud, 2012 nissan altima
Переглядів 30 тис.6 років тому
Removal of front wheel stud, 2012 nissan altima
Change rear brake pads, also removal of rotor, and parking brake adjustment, 2012 nissan altima
Переглядів 2,1 тис.6 років тому
Change rear brake pads, also removal of rotor, and parking brake adjustment, 2012 nissan altima
Wiring courtesy / security underlights 2012 nissan Altima
Переглядів 1746 років тому
Wiring courtesy / security underlights 2012 nissan Altima
How to kill the BEEP BEEP 2012 nissan altima
Переглядів 2,8 тис.6 років тому
How to kill the BEEP BEEP 2012 nissan altima
Self diagnostic, nissan altima 2012
Переглядів 7 тис.6 років тому
Self diagnostic, nissan altima 2012
Truhart coilover height adjustment 2012 nissan altima
Переглядів 6 тис.6 років тому
Truhart coilover height adjustment 2012 nissan altima
Instal / removal Tien lowering springs from strut 2012 nissan altima
Переглядів 4636 років тому
Instal / removal Tien lowering springs from strut 2012 nissan altima
Satellite antenna removal, 2012 altima
Переглядів 6 тис.6 років тому
Satellite antenna removal, 2012 altima
Walk around Gen IV
Переглядів 3476 років тому
Walk around Gen IV
Replace VSS and ABS sensors 2012 nissan altima
Переглядів 33 тис.6 років тому
Replace VSS and ABS sensors 2012 nissan altima
Nissan Altima Gen IV, Plasti-dip wheels
Переглядів 4,1 тис.6 років тому
Nissan Altima Gen IV, Plasti-dip wheels
Truhart coilover installation, Nissan Altima Gen IV
Переглядів 20 тис.6 років тому
Truhart coilover installation, Nissan Altima Gen IV
Tien lowering springs installed
Переглядів 1,8 тис.6 років тому
Tien lowering springs installed

КОМЕНТАРІ

  • @robertoooooo
    @robertoooooo 10 днів тому

    You’re the man, thank you for your knowledge.

  • @unboxings5218
    @unboxings5218 17 днів тому

    You know you did all of that for no reason. If you hold the lock and unlock button until the car flashes its hazards 3 times the beep will turn off

  • @Supremejuvee
    @Supremejuvee 17 днів тому

    Appreciated King

  • @ichigo72179
    @ichigo72179 29 днів тому

    Any introductions on the links

  • @femcatboyuwu
    @femcatboyuwu Місяць тому

    Oh my god thank you so much my 2011 just randomly came up. This was a life saver

  • @luisduar573
    @luisduar573 Місяць тому

    Excellent, I just did it and works, thank you sir

  • @surjeetgill6131
    @surjeetgill6131 Місяць тому

    Doesn’t work i tried

  • @richardhernandez2709
    @richardhernandez2709 Місяць тому

    Yooo it worked ..!!!! Thank you

  • @johncolley8589
    @johncolley8589 Місяць тому

    So, is there anyone who this has not worked for? And if it didnt work for you, what was your next step?, besides a dealership...

  • @josemartinez0530
    @josemartinez0530 2 місяці тому

    My friend God bless you for helping others like me I was about to pay 150 bucks for this thank you thank you thank you.😊

  • @nickfoo5125
    @nickfoo5125 2 місяці тому

    Worked for my 12 Altima. Thank you!! Changed the head unit and it started blinking but this worked like a charm. Thanks again!

  • @moiseslargaespada4560
    @moiseslargaespada4560 2 місяці тому

    Great video. It has helped me a lot more than 2 times.

  • @tedpendlebury7978
    @tedpendlebury7978 2 місяці тому

    Worked fine on my 2003 G35 too, so not just for newer vehicles.

  • @JoseRamirez-hw7bi
    @JoseRamirez-hw7bi 2 місяці тому

    Thank you It really works Nissan 2008

  • @rustywalters80
    @rustywalters80 2 місяці тому

    Dis not work for me

  • @crazydubmachine6729
    @crazydubmachine6729 2 місяці тому

    You are life saver awesome man it really work🫡🫡🫡

  • @JHess-jx1gx
    @JHess-jx1gx 3 місяці тому

    My check engine light just came on probably 3 days in my 05 Nissan Altima and the airbag light started this morning. I watched this video and did exactly the same as he did... Both lights went off. ⭐⭐⭐⭐⭐

  • @Keetee317
    @Keetee317 3 місяці тому

    Thank you! I only did it once and it worked! Saved me a trip and probably money.

  • @mlchaelschwanz2663
    @mlchaelschwanz2663 3 місяці тому

    would a loose CV axle replacement cause a rattaling sensation?

  • @aleksandrlatman1516
    @aleksandrlatman1516 3 місяці тому

    Thank you for the video !!! My original had boot torn. Grease was all over the place. I got the OEM from the dealer for around $250. I might try to restore the original with help of this video to keep it around just in case.

  • @Gotti_rrr
    @Gotti_rrr 3 місяці тому

    Thank u so much u really helped everybody making a video on how to ajust when I just need to kno how to install. I wanted to kno what to do with the extra spring now I know

  • @mikedv7954
    @mikedv7954 3 місяці тому

    It worked!!!. Thanks

  • @jayv5952
    @jayv5952 4 місяці тому

    It worked, Thank you

  • @mannyclemente7159
    @mannyclemente7159 4 місяці тому

    Thanks bro!

  • @Lalacruz121
    @Lalacruz121 4 місяці тому

    You saved my life !!!!!!!!!!!!!!!

  • @PunkkaRacingTeam
    @PunkkaRacingTeam 4 місяці тому

    thank you for providing this video, I just did v6 swap (including installing ABS system) to my 2007 altima (same gen as yours in the video) and when I was driving it, I was wondering why my speedo or odometer were not working (I have not erased DTCs) so this helped a lot for my own diagnostics, are you able to make a video about altimas security light stays on but car starts and ddrives? I'm a Kia/Mitsubishi master tech and nissans electrical systems are very unique and different to compared to fellow asian car brands

  • @ichigo72179
    @ichigo72179 5 місяців тому

    If i wanna have the normal high i don't need to adjust anything right?

  • @otakudenoche1585
    @otakudenoche1585 5 місяців тому

    Can confirm the video instructions worked on my 2011 Nissan Altima.

  • @tommytwo9051
    @tommytwo9051 6 місяців тому

    This worked! Thank you for your straightforward video.

  • @mamachida1
    @mamachida1 6 місяців тому

    THANK YOU!!!!! 👍🏼❤🎉

  • @johnehrke987
    @johnehrke987 6 місяців тому

    Fantastic tip. Worked like a charm, thanks!

  • @quiquelopez6962
    @quiquelopez6962 6 місяців тому

    Min 1:00

  • @ShakinMyHead3313
    @ShakinMyHead3313 6 місяців тому

    Worked for me! Happy camper now! Thanks for sharing this with us!!!

  • @QR25Dett
    @QR25Dett 6 місяців тому

    🔥thank you for this video, there’s not a lot of info on this car

  • @mcsbd5562
    @mcsbd5562 6 місяців тому

    Works on 2017 nissan Titan aswell

  • @phenome-studios
    @phenome-studios 7 місяців тому

    I did the same, light went off, i took a little ride, turned off the car, started the car next morning and the flashing started again. I have nissan altima 2008 2.5S.

  • @prospere9624
    @prospere9624 7 місяців тому

    Thank you Sir, for a helpful tips

  • @rayurbay
    @rayurbay 8 місяців тому

    Thank you so much 🙏🏼🙏🏼🙏🏼

  • @ArmenArmenjs
    @ArmenArmenjs 8 місяців тому

    you need to vacuum system before charging it. Your compressor is bye bye

  • @poiu-i8g
    @poiu-i8g 8 місяців тому

    OMG! Amazing---- THANK YOU SO MUCH..WORKED ON 2005

  • @rachgarcia7
    @rachgarcia7 8 місяців тому

    Your reset info fixed flashing light. Then 2 days later it came on again 😢 You have any other advice? Thanks

  • @tbpg_snowball4978
    @tbpg_snowball4978 8 місяців тому

    It didn’t work for my 2008 Nissan Altima coupe. It’s also not throwing codes.

  • @yungswaggtymeserveclick1603
    @yungswaggtymeserveclick1603 8 місяців тому

    Great video and yea I been having this problem where my car seems to throw itself in limp mode and I had a guy checked it out and he said these cvts transmissions needed an cooler aftermarket installation on these Nissan Altimas he say it’s pretty common and it was like a recall on these vehicles awhile ago

  • @skrttboy9146
    @skrttboy9146 8 місяців тому

    Thanks !- 2012 Altima

  • @jacobshapiro1278
    @jacobshapiro1278 8 місяців тому

    my coilovers are seized ima use a torch and apply heat evenly wish me luck

  • @henryj1211
    @henryj1211 8 місяців тому

    Thank you!

  • @manuelortiz6407
    @manuelortiz6407 9 місяців тому

    Thank you so much for the video.

  • @ApostleC.Browne
    @ApostleC.Browne 9 місяців тому

    Thank you for your help

  • @conradcannon2442
    @conradcannon2442 9 місяців тому

    Not sure why this is working for so many. I have tried this several different times and it does not work for me!

  • @logantober3652
    @logantober3652 9 місяців тому

    You saved my ass bro omg I love you lol