Відео

can this AC log show the map of states worked? can I connect the ARRL Field day log with this AC log? youtube video on this?

What radio is that? Looks like an iCom maybe, but I can't find one that has that analog gauge?

thanks for the video. Im new at all this digital logging stuff. I tried uploading my log to LOTW and it only uploaded 12 contacts. Nothing I try will it upload all 140 some contacts. any idea on what to try.? TIA 73's Paul Tyler

Very good video. Clear and to the point. One thing when setting up LoTW, there was a box you checked and didn't mention why you checked it--- "Require EOF Tag". What is that? Thanks

I run an IC-705 10w and run a 20m dipole at 42' based on your recommendations. I laugh at the signal reports when the other station reports 100w plus, multi element beans or hex beams, and they just gave me an rst higher than I gave them. I have no issue getting into Europe and have 1&3 qso's a week with NZ and or AUS. I'm almost done with my quad loop on 20m and will test it at the same height soon. Thanks for sharing your experiences.

Ok, I bought and downloaded the logging software. I'm using FT8 and FT4 currently. How do I (or where is the video) where I can get the logging information so that the contacts I make, on FT8/4, will be written to the N3FJP ALC software?

I didn't see the map options menu within the CQ WPX CW event log recently. How do I get that?

Great color scheme change options except one, is it possible to change all the white areas on the page to a different color? I’m visually impaired and all that white causes trouble for me, I can only look at all that for about 20-30min max before I need a 2-3 hour break. DC WP4TGK

So far Nice But wel SWL statiion cant not use this

Is there a way to link to the POTA or sota spot pages with out all the other dx spots?

At the beginning, after choosing DXSpotting, ... you literally fly past a menu starting with Configure, then Display DX Column Headers, Spot DX..., Band Map, Large DX Spots, and Lookup US States....... No idea which choice you chose. I was able to pause the video to view the options..... Configure, Display DX Column Headers, Spot DX...., Band Map, Large DX Spots Form. You seem to be clueless, as to how you present yourself. I'm frustrated.

Great setup. What kind of coax feed line do you send to the remote box from the shack? You also have to feed it 4 conductor with your feed line to use the remote switch? Lastly, what feed-line did you use from the remote box to the antenna feed point? I might try a similar setup. Adding up my costs first. Thanks for sharing.

That settings button doesn't exist!!

QRZ says I now need a premium subscription to upload. It use to work. If this is accurate, they just show themselves in the foot.😢

is there a field day call log?? like n1mm ? and if so where can i download it?

Can it be turned off?

It would be cool to have POTA spots like DX spots for hunters.

We at N1ME have used the N3FJP Field Day software for several years. It is great and simple to use.

Thanks for the video! (many moons later) 🙂

Thank you, Scott!

Thanks for this help. Thanks for the greatest logging software for Hams.

I'm pretty sure you did a great job with this video. Having said that, I'm finding the LoTW is incredibly difficult. Where do you upload FROM? I've entered all my contacts on eQSL and QRZ. I believe you cannot upload from QRZ unless you have a paid subscription. I'm only on FT8 and use WSJT software for that. Where does WSJT store their log info?

how can I get the DX spots to NOT refresh so fast? every couple seconds is excessive.

Hello Scott. Can old QSL cards (old QSOs) info be entered into ACLog with the original time/date info? I have a ton of these old cards that have never been saved to an electronic log. I just want all the info to be authentic in the elog. Many thanks.

I downloaded your software this morning, I subscribed to qrz aswell, I got my qrz and your software to communicate with each other, I can't get my frequency from my previous qrz logs to come to your software, what am I doing wrong?

Scott, your no-compromise approach is compelling. Thanks for presenting it! For a 20m horizontal dipole (no V) located at 42', would you feed it with 50 Ohm coax or would you use an impedance matching transformer (such as a 12th wavelength)? Would you use a balun (since a dipole is balanced and coax isn't)? Or are these accommodations unnecessary?

Great update. Thanks.

I am concerned because I have 406 entries in QRZ that are also in N3FJP. I have never uploaded from N3FJP to QRZ and am concerned that it may double post the entries. Normally I upload to LOTW and then go into QRZ and download from LOTW. Can I just say to upload all records not in QRZ?

Thanks for the update! A few comments and questions. (1) You wrote in the QRZ logbook page the following: "QRZ also provides the option to link your QRZ account directly to your LoTW account, so that when you upload to LoTW, your QRZ log is updated automatically as well." - I'm not sure if the "automatically" part is accurate, unless I'm missing something. As far as I'm familiar, one has to manually go into the QRZ logbook and select import every so often to download from LoTW into QRZ. I haven't seen an option to set it to do so "automatically" in a periodic fashion. (2) On the QRZ logbook page, there is the "enable real time upload" option. I can only assume that once you "log" the contact, the software will push it to QRZ, or it will do it in batches when closing out? Is that accurate? I didn't want to enable it until I was positive. (3) Before your update, I would upload to LoTW and then the next day, go into my QRZ logbook and import from LoTW. Worked great. Now, I assume I can upload to both within minutes. However, I assume that every now and then, I'm still going to have to import from LoTW so that the "LoTW only folks" and related confirmations are imported and synched for QRZ award credit. Is that accurate? I also just want to make sure that uploading to both isn't going to cause a strange duplicate issue down the road. I know that was a lot thrown at you. My apologies in advance. But, keep up the great work! Big fan of your software! Much appreciated!

Thank You, Love Your Software, and Thank You for your continuing support to the Amateur Radio Family 73's VE2TSM

Thanks, Scott. Excellent tutorial. 👍👍👍👍👍 Good Luck & Good DX, Al K3ZE

Hi Scott I just purchased the entire N3JFP package today. If there a way to download the entire package as one ? Or do you download each one by itself ? I guess after you install it then I add my passwords to register it ?

I LOVE YOUR SOFTWARE...JUST THE BEST...THANKS!

Great video, with clear and succinct instructions. FD qso data now transferred to Contact Log. Thanks so much Scott

This is great. Thanks for the video

Chris, Thank you for making this Video. I have used Many of your products over the years and now that I am activating more POTA, this video was REALLY REALLY helpful to get setup as an activator. 73 K7SW

Once you log him shouldn't it automatically remove him from that window ? Why have to right click it ?

Woo hoo! I am a very active POTA park activator and always have ACLog on my laptop in the field. I use your downloadable FCC database without the need for internet which is fantastic! It's great to hear a hunter callsign in real-time, type it into the Callsign field and quickly be able to see our personal POTA history and use his/her first name when replying. My only request (minor) is to have the FCC database updated more than every 6 months. Other than that, I really appreciate your excellent logging software for POTA 🙂73 KJ6ER, Silicon Valley

Thank you

Great video!

Very good video. I am new to logging and HF, well ham in general. I am learning about the logging options and tools right now. All the best, 73 de KI5HXM

Thanks !

Thanks, Scot. I used NA for years, but with new sections, it’s out of date. I plan on buying your whole package when I get back on the ait

Does the AC Log Cal data work off line? Is there any off line method for call sign lookup?

Is it possible to extract the Bearing & Distance for all stations in my log?

Can this be used for 11 meter DX contacts or is it just a ham radio log?

So you don't need to record the exact freq? Just the band and mode?

I worked you on FD 2020! Liked the surprise the software gives you when you are worked. 73!

Where do the Class and Section numbers / entries come from?

Is there a way to change the REC# of a log contact? I put some logs in not in chronological order and I want to fix that.