Відео

Problem Jatco bmw e39 1999 delay :/

Does this work with Nissan Rogue?

Is it just me or is the audio very poor on this?

Good job nunb nuts is the bolt reverse thread or what? Terrible video

Should have changed those bearings while you were in there. They should make no sound whatsoever

The green grommet cracked apart and left the brake lights on in my brother’s car too. We just cut a magnet in the same shape and taped it in place. Fixed it.

THANKS! Helped me a lot. My brake lights were staying on even when car was off...had to pull the fuse to shut them off. I found that my switch was actually good...the green plastic spacer was cracked and fell apart. So I made one out of a plastic bottle cap by cutting it down and then heated it up with a lighter to mold a nipple in center so it would seat into hole on brake pedal arm, and filled in the recessed other side with melted plastic...and put some super glue on it, and on the retaining nut as well since It would have been very difficult to get a wrench in there. Works great now.

Hoping this fixes my stalling issue on my 95 LS400 gonna order a new gasket for it then clean it good

That inner tie-rod needs to be changed!🤔

If you use atf you will eventually get pump whine. Once you do get pump whine, because you will ignore or refute this comment, flush the system with power steering fluid and the whine may go away if you’re lucky. I know you used atf in your last car but this pump will whine if you use it.

I had this issue start with my ford AU2 Ute and I’m so glad I saw your vid 🤙 I fully thought something was wrong with the gearbox itself

Looks a little lose

really did not show how to remove it or reinstall, not much worth seeing!!

would a 1997 ls400 pump fit a 1997 celsior? i know its the same but i want to know

What is that button above the parking 🅿 button for my rx300 awd is missing that button so I'm trying to find out what it does thank you

Nice job Master Mechanic

'promosm' 😈

I wonder if this will work on my ranger. It’s doing the exact same thing.

Thank man 🙏 you are boss you save my time and money tho one more to time

Outstanding 😮.. thank you for saving the day my car improved instantly 👌🙏

Sir corlla 92 1st generation 5A with auto cable gear . car shift 1st gear to 2nd gear on 2200 rpm . Is it normal or high. Due to high rpm shifting car consuming high gas . I check and very lose kick down cable but problem same. Any suggestions pl

Excellent breakdown of steps, that new pump looks very nice!!!

Who knew a thorough clean would make sure a big difference!?!? You made the difficult method look easy!

Hi, could you tell me the location and how to remove the SRS control unit on My 2001 Lexus RX300. I have to send out to get reset. Thanks Daniel

Use FULLY SYNTHETIC oil. Mobil. Then come back here and tell if that helped.

Excellent tutorial, couldn’t find a clear instruction video!

Great demonstration! Makes a seemingly challenging task seem easy👏

My cable will not tighten anymore I turned the nut all the way but stopper will not go any closer to the end do I need a new cable?

I have an issue on my 94 sc 400 when I step in the throttle all the way when I’m going 50mph it used to downshift to 2nd for faster acceleration but now it only downshifts one gear could it be from the throttle cable?

I have a question ,my car has two cables just like yours ,it looks like one is to adjust the throttle cable but what's the other cable for ? When I loosen my throttle cable does it create slack for the other cable ?

❤️(Hi sir pls help me to know the solution) i have nissan tiida 2006 & once my car engine gets cool like every after 4 or 5hrs later if i start my car then i shift the gear into D it takes 10 to 20 seconds to run the vehicle please let me know solution thanks lot

Do new cars also have throttle cables?

can you show how to really replace the switch? specially to remove the panel

I'm having the same issues on a kia sportage I sure hope this solves my problem as well ...thank you for sharing I would not have thought that ..thanks bunches god bless

Thanks alot man this video helped alot

Really appreciated.

Thank you for that information

Nice replacement!

Insightful elimination step to this problem!

[From the UK, 2022] Excellent video sir - many thanks.

On previous post j forgot to mention j change the fluid and filter twice and the 3 magnet was absolutely clean (0) both times .If some part of gearbox is broken there will be something on the magnet?

J have toyota camry1992 2.2 automatic transmitions . 3 position of 6 are ok. Gearbox Work only in P --parking R ---reverse and N ---neutral .Don't work at all D---drive 2-- and L --- limp mode.On the dashboard display all lights work only the D drive Don't work. Also the back up lights and reverse light don't work. What is the problem neutral safety switch? Shifter or something else.Is it possible to put the transmition in D drive mehanical by hand ? J AM asking this because the mehanic says the gearbox is broken and j should buy a new.In reverse the car ride great .What is the problem

Best video yet!!

Excellent instruction.

Now I understand automatic tranny comes in kick down cable control and electronic Trans control module.Good to start diagnosing all controls located outside first rather than jump to solenoid,gear set,oil level,etc.thank you for the good video.

Get a low-cost cordless ratchet off of Amazon for about $40 bucks! ua-cam.com/video/o8rV1L4Jf4k/v-deo.html

Good

So after adjusting the first nut counter-clockwise to adjust the cable and it's where you need it to be, you don't tighten the nut up that's closest to the black plastic cover to tighten it up?

i was getting this problem for years since i bought my car and i finally got it fix and decide to check if anyone make a video

Went with this one after seeing others fail at lower torque in other videos