- 48
- 100 466
Mr. Pyro
Приєднався 28 бер 2013
I take pride in showing you how to do things yourself. Step by step and a couple of growing pains as well. Sometimes things don’t go as planned but I take you on a journey with me. All my ups and downs and even my struggles. Growing up with out a permanent father figure in my life I had to do it all on my own. I’ve had friends to show me how to do things and I have had a couple of step dads to show me things but ultimately it’s been all me. I feel that I’ve been all alone in this world and I seriously say to my self frequently.. no one is going to help you, you need to do this by yourself. I do lots of DIY’s and I genuinely want to be a good father and a good father figure to my family. I want to be the very best version of me I can be. In the end what I truly want is for my kids to watch these videos and think of me and say, that’s my dad right there. Showing me how to change a tire, do an oil change or how to….
If I can do it, you can too. I’m a mechanic. I’m a DIY’r and I’m a dad.
If I can do it, you can too. I’m a mechanic. I’m a DIY’r and I’m a dad.
How to clean a spark plug
In this video I purchased a spark plug cleaning machine from harbor freight tools and it works like a champ.
Part number 32860 and it only coated my $10 plus tax.
Part number 32860 and it only coated my $10 plus tax.
Переглядів: 31
Відео
How to remove the upper oil pan on a 2011 Nissan Armada.
Переглядів 6608 місяців тому
In this video I will show you how to remove the upper oil pan on this 1st Gen Nissan Armada 2004-2015, this process is very similar to a 1st Gen Nissan Titan 2003-2015, and an Infiniti XQ56. This engine is a VK56DE 5.6 Liter V8 engine. The vehicle I am working on is a 2 Wheel drive. NOT a 4WD. Below I will link the parts I used and the link to the repair manual that I used. One small note: in t...
How to replace shock cord/bungee on a pop up travel trailer canvas/bed covers.
Переглядів 237Рік тому
In this video I will show you how to replace the bungee shock cord on your Coleman pop up travel trailer. Mine is a 1997 Colman Santa Fe. Tools used: spring clamps. www.harborfreight.com/3-inch-spring-clamp-39530.html Shock cord kit. colemanpopupparts.com/products/shock-cord-kit?_pos=2&_sid=d250a66ed&_ss=r Scissors/diagonal cutters. www.harborfreight.com/4-12-in-diagonal-cutters-63814.html Slip...
How to repair ripped canvas on pop up travel trailer
Переглядів 798Рік тому
In this video I will show you how to repair the rubber seal that holds the canvas to the side of my 1997 Coleman Sante Fe model pop up travel trailer. I am using a method of metal staples (plastic repair gun) and rubber adhesive. Tools used are tape, clamps, a paint stir stick and a plastic weld kit. Remember if you like this content don’t forget to like and subscribe. Plastic weld kit: Wrdlosy...
How to replace Stop/Tail light bulbs to LED’s.
Переглядів 35Рік тому
In this video I will show you how I replaced the stock turn signal and stop light bulbs from incandescent to LED’s on my 2002 Mitsubishi Eclipse GS. I don’t show it in the video but you can also replace the side marker lights, license plate lights and the high mount stop lights by simply using a Philips tip screwdriver. To remove panels and covers. Then use the quarter turn method on the bulb c...
How to replace dome light bulbs to LED’s.
Переглядів 114Рік тому
In this video I will show you how to replace your incandescent dome light bulbs to LED’s on this 2002 Mitsubishi Eclipse GS. Tools used: Pry tool kit from harbor freight tools. www.harborfreight.com/nylon-pry-bar-installer-kit-4-piece-63594.html LED light bulb. AUXITO 578 LED Bulb 211-2 212-2... www.amazon.com/dp/B09W2G41N4ref=ppx_pop_mob_ap_share
How to replace rear stabilizer bar links
Переглядів 67Рік тому
In this video I take you step by step on how I replaced your rear stabilizer bar links on this 2002 Mitsubishi Eclipse 2.4L 4 Cylinder engine. This process is roughly the same for all front wheel drive vehicles. The tools you’ll need for this particularly job is a 14MM wrench, 17mm wrench, an Allen head key set. The view for me is with the tire removed, it’s not mandatory to remove it. I remove...
How to back flush your heater core
Переглядів 115Рік тому
In this video I will show you a rough step by step on how to flush your heater core. I did this in a 2002 Mitsubishi Eclipse GS with a 2.4L engine. This process is roughly the same for almost all makes and models. It’s pretty simple. The tools I used were a couple of pairs of pliers. A specific set I bought from harbor freight. But realistically all you really need is a pair of long needle nose...
How to replace VES ribbon cable on a 2018 Dodge Journey Crossroads edition.
Переглядів 945Рік тому
If your flip down screen is blank, black, or only shows the input options without displaying video, it can often be repaired by installing a new ribbon cable that connects the video system to the display screen (monitor). In this video I will take you step by step on how to fix this issue. This cable will work with your 07-20 dodge. Trust. You just need to make sure you have the correct pin con...
How to replace windshield wiper blades
Переглядів 216Рік тому
In this video I take you step by step on how to replace your wiper blades. I make a reference of pushing the small clip but the ones I bought have the clip that pulls and not push. That’s the reason I’m struggling. The car is a 2002 Mitsubishi eclipse. This procedure should work on most of your modern style wiper blades.
How to reset oil life meter on 2005 - 2010 Honda Odyssey.
Переглядів 91Рік тому
In this video I show you step by step on how to reset the oil change light on your 2005-2010 Honda Odyssey. This one that I am working on has a 6 cylinder engine.
How to do a transmission fluid flush on a 1997 Honda CR-V. P0715 code.
Переглядів 4852 роки тому
In this video I take you step by step on how to flush out your transmission fluid on my 1997 Honda CR-V. This is a First generation CR-V which is compatible with all models made between 1997-2001. This is an automatic transmission. This is a two man job so keep that I mind. The reason I did this flush is because I’ve gotten an engine trouble code of P0715 input/turbine speed sensor A circuit. W...
How to replace a fuel pump/sending unit in a 2000 - 2005 Mitsubishi Eclipse 2.4L engine.
Переглядів 3,7 тис.2 роки тому
In this video I will show you how to replace a fuel pump/fuel sending unit in a 3rd Gen Eclipse. This is a 2002 Mitsubishi Eclipse GS 2.4L 4 cylinder engine.
How to mute the video sound at a gas station pump.
Переглядів 8652 роки тому
Have you ever been to the gas station and you been filing your tank but that stupid Tv on the pump is super loud and talking about something you genuinely don’t care about….. here is how to make that thing be quiet. Hope this helps you. Have a good evening, good night. 😘
How to replace the REAR O2 sensor on a 2000 - 2005 Eclipse. 2.4 engine
Переглядів 2,5 тис.2 роки тому
How to replace the REAR O2 sensor on a 2000 - 2005 Eclipse. 2.4 engine
How to replacing the gas valve ignition solenoid coils on a Maytag LDG312 gas dryer.
Переглядів 5302 роки тому
How to replacing the gas valve ignition solenoid coils on a Maytag LDG312 gas dryer.
How to remove the front diff from a 2001 - 2008 Chevrolet trailblazer 4.2L engine. THE EASY WAY.
Переглядів 20 тис.3 роки тому
How to remove the front diff from a 2001 - 2008 Chevrolet trailblazer 4.2L engine. THE EASY WAY.
How to replace a battery on a 2011-2019 Dodge Durango / Jeep Grand Cherokee
Переглядів 19 тис.3 роки тому
How to replace a battery on a 2011-2019 Dodge Durango / Jeep Grand Cherokee
How to replace front brake pads and brake rotor disc on a 2001 - 2007 Suzuki Aerio.
Переглядів 7483 роки тому
How to replace front brake pads and brake rotor disc on a 2001 - 2007 Suzuki Aerio.
How to fix a radiator with a hole, EPIC FAIL notice
Переглядів 243 роки тому
How to fix a radiator with a hole, EPIC FAIL notice
How to replace front brakes and rotors on a 1999 -2001 GMC Jimmy 4x4
Переглядів 1,5 тис.3 роки тому
How to replace front brakes and rotors on a 1999 -2001 GMC Jimmy 4x4
How to replace an Oil pan gasket on a 1997 CR-V (first Gen)
Переглядів 8313 роки тому
How to replace an Oil pan gasket on a 1997 CR-V (first Gen)
How to do an Oil change with filter on 96-00 Honda CR-V
Переглядів 473 роки тому
How to do an Oil change with filter on 96-00 Honda CR-V
How to turn on the aux port on a Kenwood KDC-MP235
Переглядів 10 тис.4 роки тому
How to turn on the aux port on a Kenwood KDC-MP235
How to install a plug on a tire that got a flat
Переглядів 194 роки тому
How to install a plug on a tire that got a flat
How to replace a tail light on a 1999 - 2004 Jeep Grand Cherokee Laredo
Переглядів 1004 роки тому
How to replace a tail light on a 1999 - 2004 Jeep Grand Cherokee Laredo
How to replace a light bulb and an igniter on a Flowtron BK40D
Переглядів 10 тис.4 роки тому
How to replace a light bulb and an igniter on a Flowtron BK40D
Thank you so much 06 Titan got the same thing
Pura abladuria
Why do you have to remove upper control arms and struts?
I didn’t take half that stuff out he’s talking about. Dude basically took everything off lol😅 I had mine out in a few hours.
I had to remove all the stuff because I was replacing all of the front suspension components, and because it’s a four wheel drive system it made more sense that all that stuff was not in the way. Also I only noticed this part was bad because while I was under there I noticed it. So yes you are correct that all those items that I removed, you probably don’t have to remove. I hope this video helps. Thank you for taking the time to shoot a message.
How to repair Kenwood kdc mp235cr is no power
Sometimes you can twist the yellow and red wire together that will create a constant power source. The only draw back to this is that then you will need to turn off the power before leaving your car, if not the stereo will stay on all day and all night. If that doesn’t work you need to start checking fuses. Either on the stereo itself or on the car side. If all those things check good then your stereo is bad, like the mother board is bad. Sorry.
This is great
@@dianabousquet3738 one day I thought to myself self, when I’m long gone my kids could look back at these videos and either A. Learn something or B. Watch their old man act like a fool for all the world to see. My daughter has actually told me that she watches these videos randomly because it makes her feel like I am still there.
2WD, 2004 Nissan Titan. Same layout. This helped a lot. Thanks for the video.
Glad it helped! I’m really just trying to make these videos because I myself can’t find the videos from other people.
Sounds good way to remove it
man you saved me some trouble! thanks for all the info,i'm doing our 17 durango tomorow.
Glad I could help, thank you for watching
Thank you sir !
This ribbon is no longer available. Do you have another recommendation for a 2019 Dodge Journey Crossroads
I apologize, I do not. My recommendation is to use the numbers on your ribbon and order one like that.
Muito bom. Ajudou muito. Troquei o flat do meu e voltou a funcionar. Obrigado amigo 👊🏻
Que bom que ajudou
here for my 5th time you’re a life saver
Thank you 🙏🏾
If I’m correct I believe it helps to drive it miles between flush to get the fluid to circulate through the valve body and have pressure to push out the old stuff
6 or so years ago I had the 4x4 go bad on mine, and the shop said it would be like 5000 bucks to fix... but did not have the money at the time, so they made it 2wd.. Now going back to it with more mechanical knowledge and having this as a spare car now, I want to replace the 4x4 transfer case along with the front Dif. Thanks for the video, now I will know what I am getting into.. lol. Will probably not start for a few weeks but will plan on it!
I cant find these on my GT ughhhbb
There are typically covers that covers those. Like a spark plug cover.
Lost me after you took him 10 tries to find the right bolt size
Sorry buddy. This video was not that great. The time I wanted so badly to just put product out there with out regard for the content. But now I hope that my videos are better. And I hope it helped you out in one way or another. Have a great evening.
My intermediate shaft pulled out with differential, now it's stuck , Gant get it to go back in oil pan, differential pinned against frame won't come out
I thought mine was stuck as well. In actuality it was hard as heck to pull out. There was a small C clip that held it onto the diff through the oil pan. I’m not sure how to get yours unstuck.
I took my trailblazer to a local tire shop to have my tires road force balanced...trying to chase down an issue with vibration felt in the front end...they noticed and showed me the sloppiness where the passenger side cv axle goes into the front differential. Could something internal in the differential cause this vibration? Could they be wrong and the cv shaft itself is whats flopping around (inner cv joint) Last question...im not sure how this front differential works on this drive system...could I remove the 2 cv shafts and the front driveshaft and solve this issue as there will definitley be no movement in the differential by doing so...i dont use 4x4 anymore anyway
On other model of vehicles you can literally take out the front cv axles and have no problems with driving. But I’m not sure how to answer anyone of the other questions you asked. I don’t know the specifics either.
Annoying hose fittings
😮
Well, done
How the hell do you get that intermediate shaft out that goes through the oil pan!!
Unfortunately for me, it was grip it and rip it. I’m sorry man. There is a snap ring in there that has to be removed.
I had to access your video twice. Thanks
My man, thank you for the views :)
Thank you you were the only one who showed how to take off the battery
You’re welcome man. Thank you for watching.
I realize this is 4 years old. But I'm pretty sure the beveled side goes down and fits snug into the manifold.
Yes sir you are correct. ALSO…. It would help if I used the right part at the time :) ha ha ha
Thanks for this very helpful video. You show the steps all along the way instead of - boom, I did all this off-camera. Did exactly this over the weekend.
Glad it helped, I try to make these videos as if I’m watching it and doing everything along side of the video. Thank you for the kind words
Thank you
Hey man I’m chasing down an issue with my trailblazer not having 4x4. Your front diff had that shaft in there that’s clearly broken. Was it sheared or something else? My front drive shaft spins in 4x4 and I hear something in the front diff but upon an oil change, I have no metal in the oil. (other than natural wear) Is there a chance I missed a part to replace or do I have a sheared shaft in my diff. Don’t have a problem doing this work! But I’ll have to do it twice.
Let me ask my other fat boy mechanic Ricardo Pino. He is usually the one who calls me an Imbezel…. Ha ha ha I’ll get back to you as soon as possible. FYI my front shaft wasn’t sheared.
@@Mrpyro187 thanks man let me know
❤❤ I thank you so much
Awesome may not have to pay expensive garage repair
you’re a god damn genius i thought mine was broke 😂😂
Very cool
Plate coving the hole is upside down, once flipped theres a groove for the wires and the spot for the clip on the plate is bottom right.
Thanks For the vid brother I’m getting ready to do the exact same job
How did it turn out. ?
Awesome vid. I was just about to throw it out lol
I'm going to use this when I have trouble sleeping!
Good job there! I have a coupon for roast duck with the mango salsa if your interested!😆😁🤣😋😂😛💥💯💥👌👍👊💪🤙😉
Good looking bro...
Man that card would be dope
Too much time wasted.
But it worked. 😝
Hey my name is Carlos I have a 06 GMC Envoy 4.2L V6 my front diff went bad and it crack in half and I can't use my front wheel drive in the winter can you show me how to remove cause I took out all of the driver side parts like axle and everything can you tell me how to do it
You still need to remove the intermediate shaft from between the oil pan and the cv axle from the passenger side as well. Also the drive shaft that goes to the back of the car
Was this for bank 2? And would it be similar for the 6 cylinder
I replaced the sensor because someone at worked said that the #2 (bank) is trying to communicate with the #1 (bank) and it wasn’t reading the numbers correctly. I’ve replaced the #1 twice already. I even spent the extra money on rock auto to buy a denso brand. And still check engine light came on. After I replaced the #2 sensor the check engine light never came back on. I am not sure if this is the solution for the V6 model.
@mrpyro187 sounds like u have a crack in ur manifold if the light is still coming on
While I realize your Flowtron had two separate issues, it should be noted that it is not necessary to remove any screws when changing out the UV lamp only. Per the manual you remove the black plastic panel located on the bottom and pull it out.
There’s a manual?! That’s super cool.
I'm so confused! I followed your link to the bulb starter replacement and you are correct, it's $3.84 for the bulb. BUT THEYRE TRYING TO CHARGE ME $28 FOR SHIPPING?!??!?? I'm just shipping it to Idaho! F me!
Holy hell that’s a lot of money. Bro I surely do apologize for that. Maybe you can find it cheaper on eBay or Amazon. Why are they trying to rip people off. That’s so wrong.
Thank you it worked
That's a 4×4 GMC Jimmy?
Yes
I have an 01 and I think my EGR looks a lil different. Regardless, great video. Thank you!
It’s roughly the same. Just make sure you get the right gasket. I was in a hurry and needed to make magic happen. Had it have been earlier in the day I would have gotten the correct gasket. Also make sure you clean both sides. You don’t want to put a new EGR valve on a dirty part.
@@Mrpyro187 copy that
😮a good mechanical bond yosislow 😂
what is the exact specification number for the igniter bulb replacement ...?
Hey buddy, if you go onto the flowtron website you will see that the part number you need is Code: 505-10544 Price: $3.84 I hope this helps you out.