Відео

Do a search on amazon for bulb changer, thousands of results for the same crap, NOT A SINGLE ONE can change upward facing bulbs.....so I solved the problem! krilllabs.com

Power Seat Motor modified with 5k potentiometer to build a high power servo.

Modify the Hatch White Noise Sound Machine so that you can control it from Home Assistant. Basically you only need to simulate touching the top metal ring as this serves to function as the "favorites" selector and the power button. I was not able to simply run the metal ring touch wire through the long wire leading to the relay as this messed with the capacitance and effectively disabled the to...

Home holiday lighting display around the yard using various industrial controls and relays coordinated by Home Assistant over MQTT.

something I've been thinking about doing for the last 3 years, finally got around to doing it.

The famed graffiti highway is no more, now just a scar on the wooded country side comprised of endless 6ft waste mounds.

To boot from your external DVD-Roms or thumb drives, you need to enable the legacy boot mode, but for most people this option is not available because their Secure Boot option is enabled. Well for this line of mobos that option was already disabled. So to fix it, I had to set the Windows OS Configuration - BIOS Mode from UEFI to CSM. After that I could switch to Legacy UEFI mode which allowed m...

Finally my popular PWM decoder chip has it's own dedicated breakout board! Easily plug your standard Futaba connectors directly from your RC receiver into this board, and similarly, using Dupont connectors, plug your SainSmart Relay boards into this board's matching pin-headers!

Push button light changer fully assembled with all eight LED light strips attached.

8 channel sequencer tied to optically isolated relays for high or low voltage switching using logic chips operated by a set of super simple forward or reverse rotation buttons.

See the solution I used to power my project from Li-ION batteries in such a way that I could charge the cells with out interrupting power to the load.

Discussion on several of the problems encountered while trying to use this battery management board.

Here we have the simple Krill Labs solution to automating your home window blinds. It's a 2 part system consisting of a motor controller base station and a tilt shaft motor insert.

This wiring scheme is used when you want to use your homes existing wiring AND toggle switches in 3-way circuits where the load and source are in different gang boxes.

Sony A6000 & 50mm F1.8 Lens auto focus hunting even in AF-S

80inch Cascading Slide Mast for PTZ Mount on robotic systems

Dell PowerEdge 2950 - windows7 installed on 6xSAS RAID

Krill Labs - STRMS Home Automation: Still Alive! Edition

Krill Labs: Large Motor Driven by H-Bridge and servo Hack...Revisited

Don's BestBuy Song - Stu's Song Parody

Using a Barracuda load Balancer to Failover HotStandy PLCs on a One-Arm Network

Krill Labs - RC PWM to Switch \\ Relay Controller Decoder Chip - KL-PWM02001

Krill Labs - 2x32 amp Sabertooth Driving 2 Jazzy Wheel Chair Motors w/ RC

don in vegas

Krill Labs - Hunter Gatherer - friendly neighborhood all terrain rover robot

Schneider Electric's Most Wanted - Dan Krill

Raspberry Pi Robotic Mobile Wi-Fi IP Cam built on Roomba, JASON

Krill Labs: Spider-4 Progress Update

Krill Labs: Powerful DIY Robotic Pinch Gripper