Відео

Mine is having this same problem but I can't find the float to figure out how to disconnect and get to it.

Amazing video. Helped me a lot

Excellent video instructions! I resolved the issue, saved money, saved time and was easier to do than imagined. Thank you!

Dude, you just saved me a bunch of money. I was about to give up after watching a few other videos regarding this same issue. Pulled the front off and drip tray out, (which was to the top). Drained it, cleaned it out and we're back to the races. Much appreciated!

Thank you fixed my 8-4. Drip tray has a sensor

Thanks for helping fix it by myself. Your advice was clearer than Ktichenaid's online product help.

Yep, that was it. Our model was close enough...different config on the tray but same problem from a conceptual perspective. Went away for the weekend and left the house w our adult kids....error code when we got back and tried to run the dishwasher. The tray was full of coffee that seems to have overflowed from the coffee maker on the counter. We live in the middle of nowhere so this easy fix saved us an expensive service call. Thanks!

We always joke that when my husband travels for business, something breaks at home. Well, he left last weekend and on day one, my dishwasher stops! Ahh! When we figured out the 8-4 groove, we googled and voila. This video saved me the hassle of calling an appliance repair man. My 15 year-old got out the drill and watched this, identified the same problem, and within 20 minutes the problem was fixed. THANK YOU!

Got mine just installed and the guy took the drip tray with him. Had him come out and tightened it up and still error code. Says I don’t need the drip tray for some reason or another. I wish I recall why. Awaiting another tech in two days. Ugh.

thanks. took me awhile to find a vid like this that had same problem

This fixed it!!! Thank you!!!!

What is the first piece for again?

Thank you - that worked!

Very well done video. It helped me fix my problem.

Thank you so much for this. I was ready to buy control boards and other stuff per other videos. All it cost me to fix was a few paper towels!

You have saved me an extra headache. Your video addressed exactly what was wrong with my dishwasher... which turned out to be an easy fix... thanks to your tutorial. The drain well was full due to a leak I had yesterday.... so again, I say thanks... for doing a bit of extra work / research for us and putting it on video...👌🤛.

Thank you! Same dishwasher model/booklet. I left a 5lb bag of ice sitting on my countertop overtop of the dishwasher for less than half hr. Naturally, it began to melt and drip out and over the counter edge and onto the push button surface. This water must have found its way to the drip tray. Same story...F8E4 error code. Had to do the same thing you did. Thanks for the visual!

OMG - you saved my sanity. I'd looked up the "8 beep 4 beep" section in the manual -- I checked the filter (inside the dishwaster) and it said to "check the float" - but I *could not find* the float. I was going to remove the whole dishwasher looking for it -- and voila! You saved me all that headache. Thank you!

Yep. That was the problem.

Thank-you for this video!!!

This video right here helpped fix our issue also thank you so much. Same dishwasher same issue.

Thank you soo much. Helped me resolve the same issue when someone put the wrong soap and ran the dishwasher.

I tried mine out the other day. I wanted to mow grass inside the catcher but parted out on the side especially on the curb where the grass deposited in to the street. Today after removing the grass from the mower, I find out that the back handle where is the back of the lawn mower have to be removed. Yes it is very light and very powerful that it tried to tilt over a couple of time. I brought mines from SunJoe so I wouldn't have to buy just two more charging battery which I also use for my snow blower which is also light and powerful. Now I have four charging batteries available when fully charged. About $60.00 difference between buying 2 ion batteries and the SunJoe lawn mower that includes the 2 ion batteries.

Thanks for sharing your experience, and you were correct 120%, gracias 😊

Any idea what could be the issue if that entire drip tray and float is completely dry?? I’m getting this error, and every video says the same thing and the issue is actually the water in the tray they found. However mine is completely dry. Any ideas? I disconnected and reconnected the sensor connection for the float and cut the power to the dishwasher and reconnected power to just let it restart. Going to run a quick cycle to see if that maybe fixed it. 🤷‍♂️ 😂

Worked perfectly! Thanks bro!

Temporary fix… nobody knows what’s the cause of the issue? The 2 drain tubes in the extremes pour water into the tray. Cause??

I bought a Sun Joe used. It didn't start after charging the batteries. He gave me two sets. One set was for snow Joe. I texted him told him about the two sets being different. He assured me they both worked fine . I charged them all. Still didn't start. After telling me he would return my money he said his wife spent it. I went to police department in his area but they weren't able to intervien . What's a girl to do?? Got any suggestions as to what's wrong with it?? overnight

Same dishwasher, same issue...great video! Saved me a ton of money and my wife thinks I'm a rock star! Thank you

Thank you so much! You’re a life saver

Great post. IT WORKED! We cancelled the appliance guy that was scheduled to come out in a week! Thank You so much for posting this!!!!!!!!!!!

You just saved me $185! I could hug your neck! God bless you!

I’m reading comments here….people thinking they fixed the problem by emptying the tray. If the tray is fulllf water there is a problem. Mine was a dripping fill hose connection. Had there not been a drip tray and switch. My subfloor would have rotted over time. KitchenAid engineers saved me. The installers didn’t tighten the connection good enough.

Thanks dude. I had the code 8/4 and beeping. Water in the drip tray was my problem. I had just refilled my in sink soap dispenser and I guess a bunch of soap was in a bowl that got put into the dishwasher. I only know that because I opened it (after it stopped) and there were soap suds all over the inside of the dishwasher. My guess is the soap started sudsing up inside the washer and overflowed down to the overflow tray. Just added this as another possible reason causing the error. Also, I noticed the tray, that the float sits in, can slide out as well. I just slid it out and emptied it in the sink. Thanks man!

You saved me a weeklong wait for the repair guy. I was NOT looking forward to doing dishes by hand until next Thursday. Thank you!!!

Wow. Your video saved me time and money! Thank you sooooo much!

Thanks so much for sharing. Had this problem for two days, and decided today was the day. Soaked up the water in the drip tray with paper towel and Voila! No more dirty dishes!

Hey man, gem of a video. Fixed my problem on a Saturday morning! If you're in Minnesota ever, I owe ya beer or something.

you da man, I bet this is whats wrong with my brand new scratch and ding dishwasher keeps fucking beeping

Thank you! Like the person below I was concerned when this occurred barely a year after purchase and the warranty expired. My wife put the wrong soap in the dishwasher causing it to foam up, which apparently triggered this. At the time I was not aware of that and just thought it had broken randomly. I was so relieved when your video came up after searching and described such an easy fix, which worked for me perfectly.

Thank you, it was easier for me to remove the drip tray and dump the water into the sink.

Dude! This was EPIC! Thank you so much! I bought this dishwasher EXACTLY a year ago to the day on Thanksgiving. Our dishwasher was doing the exact same thing. Funny, I poured potato water down the drain when making them for mashed potatoes. I sat down to watch the football game and the beep started going off. I don’t mind fixing my own stuff but error codes aren’t my thing. You nailed it! Again, thank you so much. Back to the game!

Thanks for this ! I found a small drip on the supply line that had caused this. Very helpful.

THANK YOU! Only 2 weeks old and I was about to lose my Sh!t!

Good fix. 🙏 Thank you

You just earned your 50th subscriber. I spent 3 hours this morning trying to fix this. Ended up calling KitchenAid, who said they can send out a local tech to take a look at it in EIGHT DAYS. I would rather not go 8 days without a dishwasher. I decided I would give myself one last try for 15 more minutes to try and fix it myself. Who knew a channel called "Liberty Lovin" with 49 subscribers and a potato for a camera would be the one to instantly relieve my stress and guide me to successfully fixing the issue. God bless you, and God bless the United States of America.

Dude! You sir, are a good man 🫵👊

Thank you for this. This helped me fix our 4 month old Kitchenaid. Much appreciated!

If simply pouring water into your sink while your dishwasher is running causes a backwash into the machine, your dishwasher drain hose isn't properly installed. Some sinks have an air gap (anti-siphon device) - you don't see these too often today, or if the hose goes directly to your sink tailpipe or disposal stub, it will need to have a 'loop' before it does so to eliminate this possibility.

Does the dishwasher have to be unplugged to do this?