Відео

dude! I hear "I have a pretty high end setup" several times during the video, but never hear the specs? I checked your channel, and no specs listed? So what is your setup? Nice for reference

you settings helped, i also tried the -vrnomirror comand that i seen in comments and that also helped alot to. just have to use buttons on wheel now for menu navigation. Only thing i havent figured out yet is how to access options menu without the mouse. Thanks also newest try tool i found was 0.86, where did you get 0.87?

I tried these settings and I don't think some of them do much. Fluid motion frames doesn't work in VR. And I think the only reason you can run max resolution plus super sampling is that you're cutting off half the field of view in debug tool. Can put up with it in GT cars but not in open top.

Great video, thanks!! I am also using the -vrnomirror option, since it gives me a significative boost. I wonder if you/someone can point me in the right direction, I am not able to browse menu via keyboard (no mouse because of vrnomirror). I discovered that spacebar actives the option voice, but I am not able to save for example. Do we have any guide to use AMS only with a keyboard (again, no mouse). Thanks

Dude I can't thank you enough for this, I've got AMS 2 looking better than ever on my Quest 2, I've been able to turn up some settings and turn mirrors back on AND it's running at a better frame rate than I've had before. Amazing work.

Thanks mate gonna try it later this day …first time vr with ace

I thought id tried everything until following your video to the letter , after a recent upgrade was experiencing awful ghosting of images and cars dropping in and out of focus , so not sure whats solved this but its now gone 🎉🎉😊 thankyou !!! ( i wont be touching another setting !)

Thanks mate this is a very good one …i was lost after not using cable for a while ..i use virt.deskt. For Slower games ..shooters ext ext …but with racing cable says no 😂😂😂…thanks for this good guide tip vid …tops👍💪✌️

Why set the Super-Sampling to 1.5 in the headset settings, then chop it down in the tray tool settings?

😺✌🏻

Bad guide, suggests using fake frame generation as a valid fix to bad performance.

My recommendation DebugTool = Distortion Curvature = Default (Low it's really HIGH and Default it's LOW, it's a bug in the app, you can confirmed with the "Performance HUD on ... Oculus Link info") Video Codec = H264 Sliced Encoding = OFF Encode Resolution Width = 4096 (it's the real limit, no matter what number you put above that) Encode Bitrate = 900 - 960 (it's the limit) Link Sharpering = Disable Local Dimming = Disable (Quest Pro it's the only headset from Meta that got Local Dimming) And forget about Oculus Tray, that app don't do anything new and it's not has been updated in years Ambien occlusion OFF on game settings, it has a bug right now, everything look too dark.

Turn OFF the "Hardware-Accelerated GPU Scheduling" for any game in PC VR on Quest 2 and 3, it's a lot better, zero sttutering.

These are really good tips but the only setting that I can't stand in sim racing is ASW auto. I am super happy that kunos actually cares about vr and that improvements are in the roadmap cause most devs (I'm talking about you EA) don't care about VR. I think that by the end of the year, this will dethrone AMS2 as the best VR looking sim out there.

thank

It’s annoying that you have to do all this when ACC works perfectly with just in-game settings

I just got abysmal ghosting of like half of the moving pixels (a random number of them just didn't refresh, and it looked like the hyperdrive tunnel). The POV also was stuck around 1 meter above where it should have been, so i had to look at menus through my monitor, and driving in the drivers seat resulted in being over the car. I have a RX7800 XT, and i hope it will all get sorted out within the year. On flatscreen it looks really good, but i have to run at low settings to not get any stutters.

You lost me at step #1

Great video! Another tip that helped a lot was the "-vrnomirror" command for steam launch options. Then you're only rendering whats in the headset rather than 2 images. The downside is menu navigation can be annoying with keyboard (as your mouse wont work anymore) but you can plug in an xbox/ps4 controller, enable steam input, and you're off to the races again!

Your settings are off the chain man!!! So cool!!! If you race from helmet cam you can go as further as 0.7; 0.3 in FOV tangent multiplier and see no difference at all, it is the only thing I do and all my settings are set to high + 1.5 SS in Oculus app (4070 + 5800x3D) + Quest 2. Can´t wait to go into a Quest 3 before the end of the year.

I thank you for your're vid. Did you ever get around to doing a vid on dnssec etc?

Thanks for the tips. A couple of questions: 1) oculus debug tool and oculus tray tool: do you have to use only one ? Or can you use both in the same time? The config of one of them "overwrite" the other? 2) do the monitor resolution have inpact on quality in VR? If I had a fullHD monitor (and the resolution in game option is 1920x1080) do I have a worst vision than if I had a 4k monitor (and in game 4k resolution)? Thank you

Thanks for the tricks. A couple of questions: 1) oculus debug tool and oculus tray tool: do you have to use only one ? Or can you use both in the same time? The config of one of them "overwrite" the other? 2) do the monitor resolution have inpact on quality in VR? If I had a fullHD monitor (and the resolution in game option is 1920x1080) do I have a worst vision than if I had a 4k monitor (and in game 4k resolution)? Thank you

Great overview, for me switching from steamvr to openxr & open composite improved performance as well.

Excellent video. I love the difference this has made. Subscribed!!!

Thanks for the launch option! Now I have control of the mouse again

Excellent tips mate!! Ill try that on my quest 2 with my rx 6750 xt.

can u do one for Virtual desktop + VRChat??

I thought I had it all optimized, but this has taken it to another level. I didn't use all of the suggestions. I have an RTX card and I didn't use the oculus tray tool and it still looks great. Good work fella!

But AMD fluid motion frames should only work in fullscreen mode.. Can you confirm that it works in VR?

Vinaigrette: No 🤣🤣 But in all seriousness, thanks for the super helpful guide!

I don’t know how you guys are maxing out you Rez. I have a 4090 with a 13700 with re bar enabled 64 gb ddr 5 and I can’t max out in game settings and resolution on the Quest soft ware.

I have a quest 3 wifi 6 to my router. It is smooth and I don't go anything higher than 72fps. I use virtual desktop with all settings maxed, including godlike visual, snapdragon sharpening, sharpening increased 100%. Besides it looking like 8k performance, the only problem I have is the quest 3 screen. It's fantastic already but it is limited to it's pixel count just like any other headset. ams2 settings are all maxed out. I turned down msaa just because it blurs it and I prefer low. With this setup, It is godlike beyond the oculus software and tweaks offerings. The other issue I have with virtual Desktop is if steamVR is not setup to direct rendering, launching the game will have no sound. solution is to use the mouse on the desktop and left-click the game window screen and the sound will return because you focused on the window. Solution is to go into steamVR and developer and enable direct rendering. 1.5 supersampling is way enough. FUnny thing is you can run SS at 70% and because the software and hardware of virtualdestkop is that good in keeping visuals looking like 8k, you can gain so much performance.

MSAA high is a big hit on performance and imo not a great visual improvement if any over medium. I run a 4090 and prefer a higher resolution. But i do dislike aliasing alot but medium is enough for me.

Good video, there are a few things here that i havent tried myself. I will check it out. Do you mind telling us your which gpu you have? I have an AMD6950xt and am currently running lower graphics options than you

Thanks for this. Is it possible for you to share a docker-compose config for this?

Nice! Thanks for sharing :)

Aqui não deu, porque em um momento vc esta dentro da pasta /opt/xibo depois esta em /op/xibo/xibo-docker e depois deve copiar algum arquivo que esqueceu de explicar mas vlw a tentativa

Looks like a REALLY complicated pain in the ads (pun).

please can you guide me on how to install xibo on docker, i am struggle on this please

i cant get this to work i followed all the instructions

Nice video. I had problems with Argon2 Key Gen at first but now it works great. Cloudflare is almost better than a prefixed DDNS. Thanks!

About the domain... Did you buy a real domain or did you just make something up?

"promo sm" 🤤