Jon Parks
Jon Parks
  • 11
  • 221 996
Cammed 2006 Chevrolet Silverado (BTR Stage 3 with long tube headers) Exhaust sound at 4:30!
This is just a quick overview of my cammed silverado!
• 2006 chevrolet silverado 4.8 2wd
• BTR Stage 3 cam
• Speed engineering long tube headers
• CAI
• Dyno Tuned by local shop
The truck performs really well I've been daily driving it for the past few months with 0 issues
if you'd like to know more about the build and the truck feel free to ask!
If you just want to hear the exhaust skip to around 4:30!
Переглядів: 110 685

Відео

Upgrading The Radio In My 2011 GMC Sierra Z71! (07-13 GMC/CHEVY)
Переглядів 39 тис.3 роки тому
I decided to upgrade the radio in my GMC sierra. The aftermarket radio that was in my truck when I bought it had poor fitment, and did not retain any of my factory steering wheel controls or door chimes. after doing some research I found a plug and play direct bolt in android powered head unit with wifi capabilities made by a company called EONON. the install was pretty simple and straight forw...
How to void a warranty in 30 seconds.... (Not clickbait)
Переглядів 8964 роки тому
We took the Outlander a little to deep this time.... We completely submerged a 2020 can am outlander in the creek, it done surprisingly better than I expected after a few fluid changes its back up and going strong as ever!!! Dakota's Outlander handled the creek ride extremely well, very impressed by the warrior riser snorkels, The snorkel kit for Jon's Outlander that we sunk came in the mail li...
Took my 2020 Can-Am Outlander on a quick ride at Top Trails!
Переглядів 2724 роки тому
We went on a quick ride this Saturday at a local Park called Top Trails. We didn't record a ton of footage but just wanted to share what we Got. We rode for over 4 hours and didn't even see half of the trails. We will be returning soon and we will get more footage!!!
Testing out the new upgraded Outlanders at Indian Mountain!!! + (FREEDOM footage at end of video)
Переглядів 3624 роки тому
The past few weeks both ATV have had some upgrades. We installed a Warrior Riser snorkel kit on Dakotas outlander and solved the water in belt box issue. We put a Dalton clutch kit in Jons Outlander and gave it a ton more low end power. This was our first ride at Indian Mountain and our first test of the new upgrades we had a blast both machines performed well even in some of that deep Alabama ...
Pond Redemption Part 2!! & BONUS 3 Wheel Action!!
Переглядів 4394 роки тому
This is Part 2 of the the pond redmeption ride if you have not seen part 1 Go check it out here- ua-cam.com/video/g5-6lyXlnXA/v-deo.html I Hope you guys enjoyed the ride as much as we did other than having clutch issues that we had in part 1 every thing went smooth! Yall stay tuned we got alot of good videos coming soon plus the Outlanders are gonna be getting a few upgrades in the coming week ...
WATCH BEFORE YOU BUY A NEW CLUTCH!! Can-Am stuck/sticking Clutch!! Problem Solved
Переглядів 52 тис.4 роки тому
While on a ride this past weekend I took on some water in the cvt cover, after I got the machine out and drained the cover my Outlanders clutch was acting up. I could not get it to go into gear it would just grind and die when it would go into gear. It was also pulling itself at idle like the clutch was stuck i was able to start it while it was in gear finally and drive and it sounded terrible!...
Pond Redemption Part 1 We made it across!!! (Also may have broke my Can-Am)
Переглядів 2274 роки тому
We took on the pond again, but this time no one had to be winched out! This is part 1 of a 2 part video be sure to check out the other one!! Also had a clutch issue with my 2020 Can-Am Outlander the clutch would not disengage and it wouldn't go into Gear!!! Be sure to check out the video on how I fixed it!! Link- ua-cam.com/video/WIY42U-D4dg/v-deo.html
Testing out the new clutch kit on the Can-Am Outlander!!
Переглядів 1,3 тис.4 роки тому
This was the first test ride in the mud after installing the new clutch kit. Before the Outlander really seemed to bog out while in deep mud. Now with 28" tires and the clutch kit it has the low end power needed to plow through that soupy Alabama mud. Still having an issue with getting water in the belt housing, but rest assured we got something coming to fix that!!!!
2020 Can-Am Outlander 450 Secondary Clutch Spring Upgrade!!
Переглядів 10 тис.4 роки тому
Today we upgraded the secondary clutch spring on the Can-Am. We used the WKP 32" tire kit. It came with the upgraded Spring and helix. Overall install went great. The Outlander gained a good bit of low end power. Before it seemed to bog out in deep mud now it pushes through it. It did loose some top end speed but seems to have more useful power down low after the spring upgrade!
We sunk a NEW 2020 CAN-AM OUTLANDER in the pond!!!
Переглядів 6 тис.4 роки тому
We took a new can-am outlander through the pond did pretty good overall, definitely needs a snorkel!!! LIKE AND SUBSCRIBE!!! SHARE WITH YOUR FRIENDS!!! More videos coming soon stay tuned!!!

КОМЕНТАРІ

  • @dr7b622
    @dr7b622 2 місяці тому

    She sounds meaaaaaan

  • @dazzrat
    @dazzrat 2 місяці тому

    In Australia tried the righty loosey technique you mentioned but was actually regular thread. Lucky we didn’t go too hard at it

  • @greghollifield6870
    @greghollifield6870 2 місяці тому

    Does it have cd or can you get with

  • @jaym4190
    @jaym4190 2 місяці тому

    Where did you connect the red power wire my aftermarket radio stay on even after to the key off the truck have a 2011 Sierra

    • @jaym4190
      @jaym4190 2 місяці тому

      Also no module just regular wire harnesses don’t have Bose system

  • @apaudorff
    @apaudorff 3 місяці тому

    Cool, sounds good. What kind of power did it make it the setup you have?

  • @steve-o9720
    @steve-o9720 3 місяці тому

    Are you able to connect directly to lte? If its anything like a tablet it would have a sim card slot? It seems redundant that you need to run hotspot to it.

  • @AustinOutdoors.
    @AustinOutdoors. 5 місяців тому

    i am in a 2008 silverado 4.8 currently getting a btr stage 3 also with stock stall and its my daily so we'll see how it goes lol

  • @josephgonzales3823
    @josephgonzales3823 6 місяців тому

    Did you upgrade lifters, truniions, pusrhrods, and rocker arms ?

  • @tysonpeter
    @tysonpeter 6 місяців тому

    cool stereo, only thing I don't like is no volume knob

  • @ricardoalcantara9355
    @ricardoalcantara9355 6 місяців тому

    What exact cam did you put

  • @ricardoalcantara9355
    @ricardoalcantara9355 6 місяців тому

    What exhaust setup

  • @ziaperformance
    @ziaperformance 6 місяців тому

    Rear step bumper, anything special you need when adding this? I have an 05 and would like to add the rear 2014+ bumper 🔥

  • @450outtygang
    @450outtygang 6 місяців тому

    What thread is the secondary reverse too?

  • @user-ex5ye6ux4b
    @user-ex5ye6ux4b 6 місяців тому

    How u have ur exhaust

  • @KobeandLex
    @KobeandLex 7 місяців тому

    Have you ever had a belt pop and when you replace it all gears are reverse? It was perfectly fine before now if you put it in high it’s reverse, low it’s reverse, and neutral and park same thing.

  • @jacustomtileandstone181
    @jacustomtileandstone181 9 місяців тому

    Does the factory Bluetooth and mic still work

  • @johnathanmartin4623
    @johnathanmartin4623 9 місяців тому

    GoVols

  • @omerta1949
    @omerta1949 10 місяців тому

    It Just happened to me last night. I broke everything down today. Taking my time cleaning it . 2 things..1st I like to get a clutch upgrade 2022 450 Can Am Outlander DPS cause I will be getting bigger tires. can you send info on what you recommend? and #2 before you put on the box did you rotate secondary clutch 180* ? cause you didn't show it on video. thanks for the tips great video!!

  • @cruise2kx
    @cruise2kx 11 місяців тому

    This is a good one!

  • @MonkeAtSea
    @MonkeAtSea 11 місяців тому

    I can’t get my 450 to wheelie any help?

  • @MrDmann22
    @MrDmann22 Рік тому

    What is the mini USB cable for?

  • @214deleon4
    @214deleon4 Рік тому

    Is this the truck cam? Or just the btr stage 3

  • @reifonseca5767
    @reifonseca5767 Рік тому

    No muffler? Sounds terrible

  • @Nunez16
    @Nunez16 Рік тому

    Good job on the build brother!

  • @user-yf9uo3iz1k
    @user-yf9uo3iz1k Рік тому

    I would love to see more of this truck. I have one very similar

  • @Legend22-
    @Legend22- Рік тому

    You should put a roll pan on it way better looking and shed some weight

  • @Bobby-bs5yk
    @Bobby-bs5yk Рік тому

    Sounds good buddy

  • @naterides7392
    @naterides7392 Рік тому

    i have 26's on mine not looking to go any bigger, any recommendations on a good secondary. Would this one be a good option? trying to get it to wheelie better

  • @adamreynolds6041
    @adamreynolds6041 Рік тому

    Were can i get the spring

  • @306GokartsCustomBuilds
    @306GokartsCustomBuilds Рік тому

    Very good detail explaining 👌

  • @cmgillespie92
    @cmgillespie92 Рік тому

    Bruhh she was running like a dream, all that bullshittin😂

  • @raycarter5388
    @raycarter5388 Рік тому

    Sounds good!

  • @aaronosnaya-pl8ur
    @aaronosnaya-pl8ur Рік тому

    Sounds like my 2500hd. . Nice truck by the way

  • @petropete3122
    @petropete3122 Рік тому

    Tks for sharing. I have to fix a 650 that has the same issue. Tks for showing the little springs and pin bullshit set up 🤣. Tin Can waaay over rated imo. 🤙🏻

  • @easontackettofficial
    @easontackettofficial Рік тому

    22x33s? On the thumbnail?

  • @214deleon4
    @214deleon4 Рік тому

    More videos please!!

  • @adrionvalerio1678
    @adrionvalerio1678 Рік тому

    Does anyone know why the belt cover gets extremely hot now that I put upgraded clutch???

  • @gavinbickett4551
    @gavinbickett4551 Рік тому

    Can you do a video on how to install a center console?

  • @allanhopkins5928
    @allanhopkins5928 Рік тому

    This will help me tremendously. Great step by step. Easy to follow. I pulled the cover and found some tiny ball bearings and one of the pins for the one way clutch. After watching this video I am heading out to complete the inspection and repair. Thanks, Allan

  • @Jay100kRed
    @Jay100kRed Рік тому

    What exhaust are you running??? Sounds good.

  • @danielcervantes6764
    @danielcervantes6764 Рік тому

    I have a squeak noice coming out from primary clutch and gears won’t engage. Any suggestions?

  • @brianreynolds5246
    @brianreynolds5246 Рік тому

    First problem is buying junk Walmart tools second having dead battery's 3rd it's a 450

  • @onefastyukon8005
    @onefastyukon8005 Рік тому

    Sounds like she was pissed when you stepped out the driver seat😂😂🙏

  • @bris9984
    @bris9984 Рік тому

    How does the rear camera work

  • @brandonmartinez7807
    @brandonmartinez7807 Рік тому

    Can you send link for the spring

  • @brandonbarnwell7992
    @brandonbarnwell7992 Рік тому

    So did the cam add a lot of noticeable power

  • @HunterM430
    @HunterM430 Рік тому

    Just checked the channel man, i wanna see a driving vid of it! Stock trans and convertor?

  • @johnjriggsarchery2457
    @johnjriggsarchery2457 Рік тому

    Nice!

  • @nicholasgoble9716
    @nicholasgoble9716 Рік тому

    Can I get the build list? Besides what you have listed

  • @barryblackwood1593
    @barryblackwood1593 Рік тому

    I got a 2005 z71 crew cab I'm fixing to put that same cam I don't I may go with a stage 2 my truck was ordered with 410 gears front and back I wanted to raise it 4 inches put and put 38i Inch tires

    • @Long-nd8bq
      @Long-nd8bq Рік тому

      I got a Z71 with 4.10's and 3000 stall and I got a BTR Truck Norris cam. Makes more torque than stage 2 and towing cams, and more top end than stage 3 cam. Can use with a stock converter too.