Відео

What airsoft rifle do you use? What is a good entry level airsoft AR? Thanks

New Budget-John wick Taran Tactical Combat Canik = a near perfect gun unloaded. The moment I introduced ammo... jesus ****ing A. Century Arms wants me to mail it in, of course. Huge pain in the ass. Mine even came with two springs... neither work lol

Had the same issue brand new. Went through 250 rounds. Sanded down the high edges on the polymer, replaced with springco spring, polished the feed ramp. Still had the same issues. Canik said they would send out a new recoil spring. I waited a week got fed up sold the gun and bought a shield plus.

😭 *Promosm*

It's obviously the guide rod, you know the thing that the company that deals with countless of these guns told you it was. It's pretty obvious. How is a stiffer guide rod going to make a returning to battery failure worse? It's soul purpose is to push the slide forward, slowing momentum of slide a a biproduct. if it's not stiff enough it's going to not push it forward enough. Pretty obvious stuff. But no it's the firing pin... ridiculous

Amen , finally someone who knows what’s up! Thanks

My MC9 had the battery issue. It was an easy fix. I removed the slide and the polymer top of the rail was higher than the steel guides. I sanded them down even and re-oiled it. Haven't had a failure to return to battery since. No matter what ammo I put through it. Oh, While I had the slide off I ran a piece of emeory cloth on the sharp edges on the extractor. I was seeing flakes of brass in the slide. This has been minimalized now. Thanks for the video!

I have the exact same problem with my elite compact sc

perhaps if you stopped buying guns from countries that sponsor terrorism? have a hard time feeling sorry for anyone who has an issue with a turkish pos gun.

I have the same problem with my TP9. I contacted the company that you mentioned here sprinco via email explaining the situation. In less than an hour they replied, answering my questions and explaining me all the possible escenarios also they recommended me changing the striker spring and why, so I ordered and will be waiting for it.

having this same issue with the new canik mete mc9

Camera man needs burpees in his life

Have the Canik SFx Rival Dark Side Century Arms needed to send me a new recoil guide rod because the silver one was meant for heavier loads, so the say. The firearm doesn't like Sig Elite V -Crown 124 grain ammo or anything similar to Sig Elite V- Crown, if it continues? Will need to send the lemon in for service.

250 through the sfx so far zero malfunction all 115 grain blazer . not really alot but seen people have problem with 115grs

That's a lot of malfunctions!

I'm guessing no lube, and the gun was buit to nato spec - 124 nato

Proper maintenance is key to having a reliable firearm

there is no such problem in canik

I have had the same issue.....gun not going into full battery.....it did not do this at a match today......I have about 400 rounds through it......maybe it need to be shot in? If it continues I will contact century arms to see what they have to say.

Exc. shooting ! I have Canik SF and SFX, I never had any issue at all. Both of them are exc. guns.

I've got 100 rounds through my METE SFT and have had close to 20 stovepipes. Seems the Quality control on these pistols is lacking.

I have a Canik TP9SFX and I had tons of problems during the first 500 rounds. It was very frustrating, but now that the gun is “broken in” it has become a fabulous shooter. It pretty much eats any ammo I feed it. What I really like about this gun is how accurate it is and I think a big part of that is the great trigger. This gun eats the lunch of my H&K VP9 each and every time I’m at the range. It is more accurate and has a better trigger than my VP9 - so much so that I want to sell my VP9.

My VP9 and P10C eat buffet style as well.... 🤷🏿‍♂️

Maybe it's me but when caniks first came out i watched canik fanatic alot and he recommended breaking them in with hot +p ammo. Cpl hundred rounds of that when new and they will chew even the cheapest of ammo. I have six different caniks. Only time I seen an issue is when I'm introducing a new shooter and they limp wrist a shot.

I tuned my TP9SFx with the lighter striker spring and tried using a 15# recoil spring as I shoot light IDPA hand loads. Ended up with a 17# recoil spring in the gun to get rid of the occasional failure to go into battery. I use the WP74 guide rod and 1911 Commander springs from Wolff for tuning. Pistol is working great now.

Hey man, great video. I had the same issue with my elite combat for the first couple of shots ( the first 150 maybe) but after 200-250 shots, it went away. ( I am around 1k now) how is that even possible? Should I still consider changing parts? Thanks!

I have the TP9DA, TP9SFx, and METE SFx, and they run great. Eat everything I give to them, and I find them to be fast, accurate and consistent.

Hey Chris, just found your video , having the same problem with my new Mete SFX. I thought I was limp wrists. Just ordered the spring. Thanks,

This what you UA-cam idiots get for buying a gun without research or reading if you can read

Thanks for this vid.I will be ordering my Sprinco29 striker spring asap as I'm having the same damn issue.

So far so good with mine 🤷‍♂️ have shot 115, 124 +p 147 and aluminum 115 weak turd blazer

What red dot you running on that Mete? Is that a Holosun? (407 or 507?)

Now if it designed to shoot heavier rounds why are UA-cam idiots having problems My be they can't read

I wait a lest a year

You have wait on them work out the bugs

I've put close to 1000 rds thru my METE SFT, I've had zero malfunctions. Almost the entire 1000 rounds has been 115 gr, most of them aluminun case CCI's. I guess it goes to show you that quality control on "cheaper" firearms can be a little probalamatic. That being said, a friend of mine shot his new Walther PDP at Front Sight with me and he had a ton of troouble with that, while I had none with my METE!

Look this other video. It is the same exactly isseu that you had. ua-cam.com/video/ivfd7gQm-5g/v-deo.html&ab_channel=FranktheTank

Can you please post the exactly number for the Sprinco striker spring ? There are at least 4 or 5 in the website. I was look to this one but not sure if it is the right one... 35829 Canik TP Series / Walther PPQ 29 Newton (6.52 Pound) Striker Spring Chrome Silicon, Moly Plated, Cryogenic Processed. Color Coded ORANGE $8.95

Have the same issue with mine, changed the spring to lighter one and had same problem and i use 124gr rounds also

The Canik factory spring guide rod is assembled to handle NATO 124 grain bullets and heavier hot loads. The 115 grain is an anemic weak round. I have a METE SFT with 500 rounds shot through and ZERO malfunctions, no issues.

I have the SFX, SC, COMBAT N the Mete SFT. Had the same issue only with my SC, got a new spring and never had issues again. I think Caniks quality control has gotten better but obviously some turds still fall threw cracks.

Thanks for this video. I have the exact same issue

As an owner of both..... I have to agree..... a Glock will chew any and everything.... full transparency, I’ve only shot 115 out my caniks with no problem in 2+ years...... maybe I need to test some other ammo... great video bro.... eye opener.

Bad ass review 👌🏽

Could be a sick hangout spot but the owner is a bitter old shit

How are you rolling the stoppie? Are you letting off the brake a little or?

ill definitely come back for some of your fututre uploads :)

I’m thinking about going there soon for the first time are practices for everyone and what gear do have to have on

Nice drone footage! The track looks so different than it did during the summer national ua-cam.com/video/aKSte8Gcu8E/v-deo.html

Hi