Відео

My boyfriend's in the process of attempting to remove the chrome finish on the grill and paint it black. After this video, I think it's better to just scrape the chrome finish off, clean it and cover the bumper without removing it. Definitely do not want those clips to break off during disassembly! Thank you for the informative video.

i just can't get that bastard of a plug to get off on the differential. Great video regardless, but now im blocked by one stupid clip

Thanks for using a tripod.

So what parts need to be changed for this repair?

Watched the video twice to check what size hose you are using?? I am guessing it is 1/2 inch hose, please let me know if it is a different size..thx

That is AWESOME!! Thank you for the video, my coupler rotted through with 60k on a 2014, what a garbage design, would have probably spent a small fortune at the trans shop but thanks to your video and time i can repair it now myself..Again Thank you!! Cheers

what size cam

Excellent video with great attention to detail and great camera shots. Clear and concise commentary! Thanks for posting!

That’s a nice seat lmao

So because of those 2 voltage regulators the sub won't work as well?

Any tips on doing this things I need I've got a 2011 jeep compass I'm going to be doing this on please any help and what tools do i need

Hi. Thanks for the great video. How did this turn out when the car is running? Is this car still a 6v or upgraded to 12v system? Thanks!

Planning to buy this. I have an Alpine system thst came with my car. I want to plug this directly to the Alpine head so when i turn on the igniti9n this also turn on and when i shut off the igniti9n, thisnalso shuts off. Hopefully that should work right? I dont have an amp. Just the basic head unit and 2 speakers, front and rear each.

How do I open the soundbar 🫢

great video, what size fill hose / barb thx

Thanks!!!!

So do i still need to have my amp powered to the battery as well? Amd the ground grounded? Or is this bt reciever powering and grounding my amp as well?

Hello. Im looking for a similar fix, going to do my 2011 as a preventive matience got my gates hose from napa and some gates constant tension clamps. Wondering how this has held up ? Thanks

This was great, thanks. You know that POS vehicle's not even worth the repair though right? You just did it because you love this 💩?

Is it manual?

Great job, thank you❤❤

Looks come with oil spark plug

After market manifolds for these 4.6 will only last 2 to 3 years, they don't make oem anymore,, i been replacing mine on warranty,, if you are planning to keep vics,, marquis, towncars, mustang F 150, get ready for this repair periodically,,, bad design to put intake and coolant ports next to each other separated by a gasket they know is going to fail

Thanks

what a pain in the ass to have to remove the bumper cover to change a light bulb.,

All kinds of stuff bowt to fall thru there dammit

Followed your instructions and boom audio is back thank you for saving my soundbar 👍👍

I am torn between this model, and just getting a Miller multi 235. Past couple jobs I have worked we had Millers and I really was impressed. I have had bad luck with a small Lincoln mig, also Hobart.

Please can anyone help. i loaned my pp4 to someone and it came back non working. i found diode burnt and replace and it came back to life, but one capacitor or resistor fell off and it does not work as it should. Please can anyone open up and post me a picture of the circuit board both sides so i can see whats missing. tia

Thanks for making the video confirming my suspicion that I am capable of doing this job myself. The garage quote for this was over $1100 Dollars. I feel bad for people that can't do some of their own work getting totally ripped off.

Remove the covers and see how much airflow you have with the filters installed, yes they will keep the internals cleaner but if airflow is restricted temps will rise much faster than usual. Sometimes is better to open every single welder every 3-6 months and just blow it with air compressor.

did you just drill holes into your box for the us general side shelf’s?? or drill into the shelf and bolt into the side handle holes?

You should get a rear sump oil pan since your truck is a 4x4

Holy crap. Even bmw it takes 1 min to change out bulbs

Yeah I my tensioner wouldn't move either, you answered my problem.

Slick!

Hey I have the same Bluetooth receiver trying to install and I noticed that the Bluetooth receiver will only power on if I connect the remote wire to the hot wire (the red led light will come on) also when I try to connect it called “LEDBLE-00-1409” and when I connect to it (confirmed connected) my phone plays music out of its speakers instead of through Bluetooth

Bad seal

I think I'm having this identical issue ..late 2001 Marq, sat for 1-2 years, new fuel pump and she ran fine until this last cold weather spell

Great video!!,,,also you don’t have to take the inner lining wall fully out just half the screws is fine and just fold the lining half way down to get to the bracket screws..

you did not mark the nut and flange and drive shaft orientation and count the threads before starting,also you should remove the wheels and use an inch pound torque wrench to check the load before disassembly for putting it back to spec. on the newer models the nut is to be thrown out and a new one used, they are color coded on the back side.

hi，if mine one the subwoofer have no sound ，whats the problem

I've been through 3 of these....it works about 3 months then happens again

The bean counters at Polaris corporate have consistently year by year, cheapened the product to where I do not want one. Now we are seeing videos where people are having problems with their wheel bearings because they’re not even sealed.! Keep it, Polaris!

Thanks for this tip ! 👍

Great video. About to do the same work to my own 2018 and it this was a perfect video to make sure I wasn't missing anything. Thank you

Ok sk why is my amplifier nkt turning off i have it wored the same as yours and itnwont tur. Off

Video on how to get to the head light out?

Used black pads from HF to make inserts for both sides then poke holes for tools. Cushions the tools too.

How much did the kit cost? You would like to get one of these kits myself for my sprinter van?