Відео

Thank you! For this flight I used the FullSend 6S 3300mAh battery from iFlight. The Bob is quiet heavy with the GoPro and this battery, but okay. I also use a Tattu R-Line 6S 2200mAh battery for my flights with the Bob. Less flight time, but more agile...

@@flipsfpv Got it. In your opinion how does the 3300mAh and 2200mAh feel to fly. Sorry for asking too many questions. I basically have the same quad and have been using it for some time. I have been flying 1850mAh GNB batteries, which are fun to fly without GoPro, but gives only 3-4 mins with GoPro. So was thinking whether to buy a 2200mAh or 3500mAh DOGCOM (those are the only 2 options I have). Also I don't have a lot of mountains where I live, but I would like to surf and dive my quads on mountains whenever I get a chance. So which one of these batteries would you suggest I buy?

No problem! I was facing the same decision. If I have to choose, I will recommend the 2200mAh battery. You can get 7-8minutes flight time with some climbing. If you want to go higher and longer, go for a bigger battery like the 3300mAh.

Your comment makes no sense, bro 🙃 The gyro data is manipulated by vibration, so the gyroflow output is shaking. There are several videos and reports about this problem with the O3 AirUnit out here on UA-cam and i.e. reddit. Just search for "O3 shaking video" or similar... I'm glad you haven't had any problems with gyroflow so far!

Oh! Vertauscht angelötet? Normal sollte das GPS davon keinen Schaden nehmen, sondern einfach nur nicht funktionieren 👍🏻

@@flipsfpv alles top 👍

With Crossfire 😉

@@flipsfpv perfection

Hi, I have frame version 1.2 - I think the frame version 1.4 is already prepared for the O3 cam and Air-Unit according to the iflight website. So you can follow this guide, but don't have to print the custom mount 👍

Thank you! Yes, according to the data you should go with 4S for long range. However, I prefer 6S because I don't like the flight behavior with 4S 🙃

Thank you! Yes it's the video feed from the Vista recorded by the Goggles V2 :)

Thanks 👍

@pottyputter05 I fly with betaflight

Hey @SalmaDrone, for this flight I used my GoPro12 without HyperSmooth. I stabilize the footage with Gyroflow. With the GoPro12 I have problems with the footage taken on the BOB57. With other GoPros I don't have the problem. Also I don't have problems with the GoPro12 on other drones... I think it is a bad combination of the GoPro, the mounting and the motor frequency.

@@flipsfpv wow. Interesting. Earing that now I really have a problem to decide between bob57 and chimera 7. Thank you my friend

Hi @MaxLoew-ds5ez, die BOB57 ist auf jeden Fall eine gute Drohne für LongRange und cinematische Aufnahmen. Das Versprechen von iFlight ein Mix aus LongRange und Freestlye zu sein, kann ich nicht bestätigen. Die BOB57 ist im Vergleich zur Nazgul viel weniger agil. Ich fliege beide Drohnen (Nazgul & BOB) seit ca. 2 Jahren und fliege viel lieber die Nazgul, da sie sich präziser und berechenbarer steuern lässt. Hoffe das hilft dir weiter.

@@flipsfpv ohh ok verstehe. Die Nazgul dann auch besser geeignet für Videos oder kriegt das die BOB auch hin - wenn es mal kein log Range video sein sollte. Krassen Freestyle werde ich wohl eh nie machen oder wenn, dann mir dazu eine eigene drohne bauen. Vielen Dank für die Antwort :)

Welche für Videos besser ist kommt auf den Anwendungsfall drauf an. Für langsame, cinematische Aufnahmen (Landschaft, Berge, ...) würde ich die BOB57 nehmen, für schnelle Aufnahmen durch Hindernisse hindurch eher die Nazgul :)

Hello, thank you! Note that there is a "minimum distance to home" for the GPS to work. You can configure this distance in Betaflight. If your drone is within the minimum distance, the drone will stop its motors. If the drone is further away than the minimum distance, the drone will start gps rescue (if configured correctly).

@@flipsfpv thank you my friend. Minimum is 50 mts. May be is that. I will check.

@@flipsfpv great 🙌🏻💪🏻

So it works now? Great to hear that 😃

@@flipsfpv let you know. I Will try it bro

Thanks ✌️

Thank you! I use the "Fullsend 6S 3300mAh" from iFlight and can go up to 10-12 minutes when flying mountains in cold conditions. I also use the "Tattu R-Line 2200mAh 6S V1" reaching 6-8 minutes when moutain surfing. I fly with a GoPro Bones mounted to the BOB.

It can be used "plug and play" without connecting SDA & SCL 👍

@@flipsfpv so why you solder? I have nazgul evouge vista kinda confused thought only quick connection

@Cinoo90 becaus I want to use compass and so I have to use SDA & SCL connection. Also I solder the other pins directly to the board to have all wires going the same way to the FC. And the connection-wire from the GPS comes with a plug only on one side. So I used the plug side to connect to the GPS module and the "open ends" to connect to the FC. Do you see any disadavantages from soldering the connection?

​@@flipsfpvok so i can go without sda scl... RTH will work fine then?

@Cinoo90 yes, RTH works without SDA & SCL 👍

Thanks ️👍

Thank you! ✌

Hi! Yes, unfortunately you will need to purchase another TPU/plastic part or print one yourself... You can find many 3d files for mounting the GPS on your drone online. I use thingiverse or cults3d most of the time. I had mine printed by a friend. In Germany there are also several shops that offer printing services. Or you can find someone in your country on a discord server or online forum.

Hi, glad you like it! Yes I had to cut the connector cable and solder it to another connector. I used the original connector cable from the O3 and the old cable from the vista. You can see the wiring in the video at 1:11

Hi, you ask about the frequency of the video transmission? As far as I know, the DJI AirUnit and goggles manage the frequency automatically. I have no way to change it.

@@flipsfpv I meant also an upgrade antenna for The Goggles for O3 .. most Of The aftermarket ones are only 5,4 GhZ .. Are u flying the stock goggles antennas ?

@@VikSim_VS ah ok now I understand the question. I'm flying most of the time with the DJI Integra goggles with stock antenna. Range is about 2km without obstacles. For longer ranges I use the Goggles V2 with the TrueRC X²-AIR 5.8 MK II antennas: 5,8 Ghz. Better range, but the image quality is better with the Integra. The TrueRC X²-AIR 5.8 antennas are available for the Goggles 2, too. I think this is the best combo for cinematic long range flights 😀

@@flipsfpv i have The V2 goggles, but does the O3 also use the 2,4 ? I just don’t want to lose my drone while flying to a mountain or so, sometimes I see people not losing their signal while me on my FPV Dji drone it’s not possible. But the O3 has a stronger signal. Will Look after the antennas you mentioned

@@VikSim_VS the 2.4 GHz and 5.8 GHz frequency bands are used for reception (O3 AirUnit). However, only the 5.8 GHz frequency band is used for transmission. So you are good with the 5.8 antennas. If there is a probleme with the freqeuency, you will noticed this before flying far away 🙃

Hi, danke dir! Da gebe ich dir komplett recht - die GoPro ist leider auch durch die O3 nicht zu ersetzen! Bin mittlerweile auch wieder auf jedem Quad mit einer GoPro unterwegs. Die Bildqualität ist im Vergleich zur Vista spürbar besser - aber "nur dafür" alle Quads umzurüsten lohnt sich nicht. Kostet ja doch einiges die AirUnit... Einmal war ich froh, dass ich die O3 an Board hatte und diese mit aufgezeichnet hat, da meine GoPro versagt hat (Aufnahme einfach während des Flugs beendet). Bin auch gespannt was (vermutlich bald) kommt von DJI 😉

@@flipsfpv ja, typische FPV-Probleme 😂👍. Habe mich auch einmal schwarz geärgert als sich die Gopro mitten in einem LR Flug mangels Batterie abgeschaltet hat. Habe danach die Laufzeit aller Batterien für die Gopro getestet und dokumentiert. Alle Zubehör-Akkus jetzt nur noch für kürzere Flüge. Wenn es auf LR geht, kommen nur noch die Original-Akkus rein. Teuer aber leider gut. Wie so oft … 😅👋👋

Hi, thanks for your feedback and subscription! I can give you a hint to find the "Nordwand": look at the border between Austria and Germany south of the "Tegernsee".

⁠@@flipsfpvahhh, great 😁. Thanks a lot. I think I found it ⛰️🤩👍

@themoggidriver if you would like to go there, we can meet up if you are interested ;)

@@flipsfpv yeah, 100%👍👍. I‘ll contact you when I find the time to visit Southern Germany again … 😊✊✊

Hi, thank you! Yes, the video was taken with the DJI O3. The propellers are no problem with the iFlight BOB57 because the arms are set back very far. Like a deadcat-frame. I use a Lipo with 3300mAh for a flight time of about 11-12 minutes without GoPro. I use another Lipo with 1800mAh for a flight time of about 8 minutes without GoPro.

@@flipsfpv Excellent, do you know if the Fullsend 6S 3300mAh Battery from iflight are good, and I would like to know the approximate flight time of the Fullsend 6S 4000mAh Li-Ion Battery and if with them you can do a roll or tilt, thanks for your help!!!!

@maurogutierrez You are welcome! I use the iFlight Fullsend 3300mAh Lipo. It's a little heavier than advertised, but it's a good battery. You can do everything like rolls and so on with this one. I don't have any experience with the Li-Ion battery.

@@flipsfpv OK, can the fullsend 3300mAh be used in a Nazgul Evoque F5 V2?,,, and do you know if the Iflight Nazgul F6 V2 has any advantage over the Bob 57 since both are 6 inches?

@maurogutierrez the 3300mAh battery is too heavy for the Nazgul F5! The Nazgul F6 is more agile than the BOB57. The BOB57 is a more cinematic drone. Less freestyle, but a little more flight time. I feel more comfortable in the air with the Nazgul because it's easier to control and it's more maneuverable.

Thank you!

Hi, I have no problems with heat inside the Protek frame and the O3 AirUnit. I have heard that some people have problems, yes. For me it just works, even in the summer. To access the sd card, I installed a usb-c cable with a 90 degree connector to the airunit. The cable goes through the frame to the front where I can connect a second usb cable to access the airunit and the sd card.

Hi, danke für dein Feedback! Ich fliege die Protekt auch im Sommer bei hohen Temperaturen. Teilweise auch mit GoPro on top. Bisher hatte ich keine Probleme mit der Temperatur beim FC oder der AirUnit. Die AirUnit wird beim Aufzeichnen sehr heiß. Gerade mit Stabilisierung und in 4k. Da hatte ich zuletzt Probleme bei der Nazgul. Nimmst du mit der AirUnit in hoher Auflösung auf? Vielleicht strahlt diese dann zu viel Hitze an den Core ab?

@@flipsfpv Läuft nun alles perfekt! Habe nun alles luftiger gestaltet und nochmal alles neu mit Betaflight aufgesetzt! Danke für deine Nachricht! LG

Thank you so much!

Hi @eternalR81 ! Sure you can buy the iFlight Nazgul with ELRS, Jumper T Pro and DJI Integra and go flying. Binding the goggles is very easy - you can find many videos on how to do it here on UA-cam! There are also a lot of videos on how to bind the controller. Binding the controller to the receiver may take a few tries at first. But the community can help you! The Nazgul is very easy to control, but does not have a "safe mode" like the DJI FPV where you can stop and hover. If you already have the goggles and the DJI Controller 2 from your DJI FPV Combo, you can use the goggles and controller from DJI without buying an extra receiver and controller - and the binding is a bit easier. Hope this helps you!

@@flipsfpv Thx man ! I was going to use my DJI FPV googles and controller. But I don't want to have to re bind it with my Potato if I want to fly it again. It's getting cold here in Canada so I might buy the drone first and get the rest ready for next seasons flying. I'm just gonna enjoy my DJI FPV for now .😃👍

@@rhysezfpv ah okay that make's sense! So you have 2 "standalone" systems 👍🏻😉