Відео

Me too!!! My doesn’t even have a slit. It is straight on both ends and does not dispense. How long should the straw be? Can I make my own slits?

It’s a tiny air canister

IF YOU BROKE JUST SAY THAT. DON'T TRY TO TELL OTHER PEOPLE WHAT TO SPEND THEIR MONEY ON

@@LiiveWiire uh oh, sore spot. If you are guilty about your spending habits don't take them out on me. I don't even know you. Go spend your money helping the less fortunate and not on this crap.

@@rustyshackelford8140 cool, judging by you having the time to tell strangers "THAT YOU DON'T KNOW" on UA-cam what not to spend their money on. You seem like your the less fortunate that your speaking of...! You don't know what the other man's finances are like! So, $150 on a item that makes somebodys quality of life better is a small price to pay to a person who has thousands of dollars! But.... SOUNDS LIKE YOU DON'T KNOW ANYTHING ABOUT THAT

@@LiiveWiire the kid who makes your Jordan shoes in another country for 10 cents an hour. That's who I'm talking about you triggered fool. Think about Ling Ling next time you burn your money on some over priced garbage like this.

@@rustyshackelford8140 Look bitter Bob, ling ling doesn't think about my people or do anything for my ppl! If you wanna go save ling ling from underpaid jobs in China be my guess. But I'm willing to bet that you haven't went to China and started any type of better paying jobs for the billions of ling ling's that need it have you... NO YOU HAVEN'T! Because if you did you would know that the same phone, tablet or computer that your using to show your bitterness for your financial situation IS ALSO MADE BY PEOPLE WHO MAKE MINISCULE AMOUNTS OF MONEY FOR THEIR LABOUR.....! BUT YOU STILL BOUGHT THAT WITHOUT GIVING A DAMN ABOUT LING LING DIDN'T YOU? YOUR A HYPOCRITE!

Fit right in the door perfectly. It's 12" tall and can fit in any fridge.

@@RoyalBrewNitro that's being optimistic for an item you can't guarantee me for under 100 bucks. That's just a guess. Still doesn't beat a 20 dollar coffee machine and some ice cubes

​@@RoyalBrewNitro hahaha I was right. For 200 bucks I'll take the convenience of buying it in a store 100 times and save myself washing something 200 times. Nitro isn't even that good. 300 all in for a system to brew coffee I can get for 3 bucks.

Hi! Our 128oz uses two nitrogen cartridges per batch of cold brew. It's totally ok to leave the second cartridge in the fridge installed until you run out of cold brew. The nitrogen can keep your coffee fresh for roughly 3 weeks. It doesn't need to be shaken every single time but for the foamiest pours we recommend giving it a little shake to help infuse the nitrogen. The keg is about 17.5-19.5" with the tap depending on how you angle it. If you need a smaller option to fit your fridge, we have the 64oz as well which only needs 1 nitrogen capsule per batch.

@@RoyalBrewNitroper batch? Meaning the full keg only needs 1 cartridge?

It is!

17.323 inches to top of cartridge holder when attached

Make sure to give a good shake, side to side after each cartridge is added and before each days pour. If you shook too gently, that could cause a little less. This video is of nitrous oxide. Try nitrous oxide for more foam. One per batch. What type of cold brew are you using? If making your own cold brew, it's possible your cold brew composition isn't interacting well with foam if it is too watery or too concentrated. Try buying a store-bought cold brew to test if the foam responds better with a different blend of cold brew. We recommend Starbucks cold brew or Stok cold brew in 48oz variety for example, available at local stores. ***Or*** you can brew your own cold brew and pre-mix your own cold brew with some dairy or cream (most shops do this for their nitro).

Any regrets going with the growler?

Does it sound like gas is escaping? You're using 40 oz of cold brew? Try 40 oz. If you remembered to attach the plastic straw to the bottom of the top piece with the slit end down and no liquid is flowing, then there is a small particle (i.e. coffee grounds) clogging the tapping system. cdn.shopify.com/s/files/1/0590/2408/1067/files/Slit_down_480x480.jpg?v=1642362438

First, when the tap handle is closed, unscrew the stout faucet tip and test to see if liquid flows out the faucet when the stout tip is removed. If liquid flows out of the faucet after the stout tip is removed, then the stout tip is clogged. Clean out the internal pieces of the stout tip and then screw back on to the faucet. This can be done while the keg is still pressurized, as long as the tap handle is closed. Use the small brush to poke thru the bottom of the faucet tip and to dislodge the internal pieces of the tip, popping out the o ring, silver plate and white plastic piece. Thoroughly clean and scrub the plate with the brush and make sure all five holes are not blocked, afterwards holding the plate up to a light and making sure you can see thru all 5 holes.

See video: ua-cam.com/video/a3xh1aQ6We0/v-deo.html

If you try both of the above and it still doesn't work please contact royalbrewcafe@gmail.com and we will send you a replacement top piece or faucet depending on which is causing the issue based on your report. Thank you Michael

Are you using 40-48 oz of liquid? If you use too much, the gas doesn't have space to form. Due to cartridge manufacturing variance, if gas escapes, use only 40 oz (or 80 oz for the 128 oz keg), this will leave extra room for the gas to form in case a cartridge is extra pressurized. If gas still escapes when using only 40 oz of liquid, please email us at info@royalkitchenco.com and we will send a part in case of part failure

That sounds like a very good substitute idea!!

8 gram

@@onemusicfl Hi Rob, for a more classic Stout flavor with loads of foam, try switching to Nitrogen: Liss Pure 2g Nitrogen Use 2 Cartridges per batch. Aim for 40 oz for most optimal results.

www.amazon.com/NitroPress-Cocktail-Chargers-Nitrogen-Cartridges/dp/B07QLXHJXJ/ref=dp_prsubs_1?pd_rd_i=B07QLXHJXJ&psc=1 or these for now, any 2 gram nitrogen cartridge that is in stock

The mouth is a bit small for that, typically a big mason jar would be advisable then transferring to the keg when it's time to do the nitro process!

@@RoyalBrewNitro ok thank you