- 11
- 12 918
Garley’s Garage
Приєднався 17 вер 2015
Adam Garley : Owner of Garley’s Garage. Always keeping it Wheel. Huge passion for Custom American 2 as well as 4 wheel vehicles. Follow as I review products, give tech tips and show happenings here in my personal shop. Beware, I love my family to the fullest so there will be some of that mixed in because I don’t have time for multiple channels. Enjoy!
Rebuilding My Dad's 1994 FXR - Part 1
Possibly the most meaningful build I've done (and will do). After my dad passed away I bought back the last Harley Davidson motorcycle he owned, a 1994 FXR. 10+ years later I'm ready to completely rebuild it.
I'll share a short piece of our story and this bike. I share some top secret things I'm working on, play a little joke on some FXR guys, and start the tear down.
You'll hear me talk about a few things I'm still up in the air on. I'd love your feedback in the comments of which way you think I should take the rebuild.
This one's for Lorenzo aka "Pops".
As I mentioned, if you're looking for a great sand blaster, check out Reed's Abrasive Blasting:
Instagram - reedsabrasiveblasting
I'll share a short piece of our story and this bike. I share some top secret things I'm working on, play a little joke on some FXR guys, and start the tear down.
You'll hear me talk about a few things I'm still up in the air on. I'd love your feedback in the comments of which way you think I should take the rebuild.
This one's for Lorenzo aka "Pops".
As I mentioned, if you're looking for a great sand blaster, check out Reed's Abrasive Blasting:
Instagram - reedsabrasiveblasting
Переглядів: 424
Відео
How I Got Into Customizing Motorcycles
Переглядів 30814 годин тому
As a kid born in Cali, raised in Las Cruces, New Mexico...the path of how I got into customizing motorcycles is an interesting one. From my lowrider mini truck, to a little freestyle motocross, on into Harley Davidson's and really learning to fabricate and customize. This is my back story (including some tough stuff).
48 Hours to get a Harley Davidson Sportster Ready for Sturgis
Переглядів 2,3 тис.21 день тому
Sturgis Crunch Time...A buddy brings his girlfriend's Harley Sportster by that needs a LOT of help and we've got 48 hours to get them running, safe, and on the road to the Sturgis Motorcycle Rally. We rebuild the forks and replace the lower legs, change the wheels & wheel bearings, modify and rewire handle bars, there's suspension upgrades and other last minute things we find. How'd we do? Give...
Product Review - A Must Have for Your Carbureted American V-Twin
Переглядів 14928 днів тому
When I run across a product I feel everyone needs, I have let you know about it. Here's my product review of Fast Eddy Co's carburetor Float Bowl Valve. If you've got an American V-Twin with an S&S, Mikuni, or AMAL carburetor, this little part will save you a ton of headaches...especially if the motorcycle is going to sit for any length of time. Fast Eddy Co - Shop and follow them on social med...
Machining Axle Covers for a Custom Motorcycle Frame
Переглядів 332Місяць тому
When you're building a custom motorcycle with a custom frame, there's no guarantee you'll like the way it comes. In this video you'll see the aluminum axle covers that I machined on a mill for my customer. We think they turned out pretty slick. What are your thoughts? Like the video and leave a comment to let me know. And, while you're there, make sure to SUBSCRIBE to keep up with upcoming vide...
How to Make Drag Bars from Scratch
Переглядів 432Місяць тому
It's not always an option to order a set of handle bars for your custom chopper straight out of a catalog. Sometimes you need to make them yourself, or have them made (especially if you are using aftermarket hand controls like the Performance Machine ones we use). This video will walk you through making a set of drag bars from a stainless steel tubing. We will measure, knurl, (knurl again), and...
Installing a Commercial Metal Sign, Mistakes to Avoid, & How to Save a Little Money
Переглядів 72Місяць тому
We are finishing up fabrication on a commercial metal sign and installing it. You'll see me point out some mistakes I made and how I'll do it differently next time. Plus, I'll talk about how this design saved the business owner some money. There's always a lot going on in the shop. Like, Comment, & SUBSCRIBE to keep up and catch some tips along the way. Shoutout to Top Koat, once again, for a g...
Omar's 140 CFL
Переглядів 9 тис.Місяць тому
From start to finish there are so many details of this custom West Coast Chopper 140 CFL build that I had fun creating. This video will break down the bike from fender to fender. This was a fun project that an out of state customer shipped to me, explained his vision and I made it a reality. Big shoutout to all of the shops that played a part (find them on Insta): Top Koat top_koa...
Sputnik Tear Down
Переглядів 1476 років тому
Breaking down the Sputnik build so I can get the frame sandblasted . That will give me a clean slate to work with. Ill be building a custom tail section for this one.
Sick! Can't wait to see how this turns out!
I hope it doesn’t disappoint!!!
Im looking forward to this one, Im a FXR guy myself. That was funny, 330 rear tire raked out front end,, lol.
Cool, yeah I had to mess with my friends. They were so cool about it. Looking forward to getting it done!
Fantastic, just the build I was waiting for 👍👍👍
perfect! I hope you follow along as it goes!
I'm excited to see this one come together. I expect some trick parts on there you can't find other places. 😉 Your dad will love it.
That is the plan and Im sure he would!!
So the frame was built for a 200 tire but the guy sent a 140 tire, and that is the frames fault?
very clean! Nice attention to detail.
Thank you, I appreciate that!!
That’s one ugly bike
Damn, sad it didn't meet your expectations. I will try harder in the future. Appreciate the feed back Scott.
@@garleysgarage it’s just not my cup of tea. But according to comments theirs lots that like it
@@scottbowles9574 I appreciate the honesty, Please check out others i'm posting, I don't stick to one style. I build them all. Have a great one!
Good to hear about your background. Now let’s see that Build or Bust episode.
Man, i really want to do that. Ill try to make that happen soon!
Really enjoy your UA-cam channel, also bought a hat and shirt a while ago from ya. 🇺🇸🤘🏼
Thats awesome! I hope to have more Merch available soon! appreciate the support!!
👍👍🤘🤘
Thanks Shand!!
looks similar to my bike, exept with a springer fork and grass burner exhaust
Wow Springer front end must look really cool on that bike. Nice
Oh man that must look good! Im not a fan of grass burner exhaust....only cause that leads to more bike cleaning lol. If you are on Instagram send over a oic, would love to see it!
Well practice japanese cuz it aint made in America anymore ahahaha
You got that right! Little by little metric tools are finding there way into my toolbox. Not Cool!! lol
Great work!
Thank You!!
Sweeet 💯💯💯🏁
Thanks J-Mac!!
Long haul bike riders with clean rides are the best!
There's a guy on a WCC forum that recently had an accident, his CFL's front end snapped completley, but didn't break on the neck welds, the tubes ( down. Back bone) break just an inch before the welds on the neck, the gusset didn't help. Apparantly theres a bad batch of CFL frames giving issues.
Yes there are. They are early frames. I believe they were built at the Long Beach shop. Crazy scary im sure!
@@garleysgarage I readed about the problematics ones were the early ones in the LBC shop, and at the high of the craze, Jesse had a 3rd party company building them, those were the ones offered as a kit. Mine is an LBC shop build one, so far no issues. Thanks for the great content!
@@garleysgaragehow much did a new CFL frame cost back then?
@@unkorichie2029 Like $2500 if i remember correctly.
Harley Davidson Goes Woke w/ CEO Jochen Zeitz, Big Sponser of LGBTQ++, Employees forced to Learn DEI Harley Wants to Make Dealerships more DEI CEO is pushing Equality Act, Basically more protections for LGBTQ+ individuals across key aspects of life. It also expands the definition of public accommodations to include more places and services, ensuring broader protection against discrimination .. Men Can Go into Women's Bathrooms/Locker Rooms, and Take Over Women's Sports Woke Board Member Allan Golston
Fried chicken shit hell yeah! 😂
Hahahaha , Im bad with names!
Awesome build dude. Thanks for sharing you do great work.
Thank you! i really appreciate that.
Yes sir! Man show dem axel spacers!
Will do!!
Those are a lot cleaner than the ones that came with the frame, for sure.
No Doubt!!
Nice, Adam!
Thanks Shand! Appreciate the support bud!!
Love it! Good stuff…
Thank you! Means a Lot coming from you. Love your work!!
Thank mother f$%ker is clean. Wow
Good to see ya Garley!
Thanks for the support Kevin!!
Man! She is sweet!
Thank you so much, I really appreciate that!!
You're a beast dude!! I mean everyone who worked on this in some way just killed it! 🔥
Thank you! Yeah, it takes a while to find just the right people to do great work that you can trust.
Great video Adam! Beautiful bike.
Thanks Joe, I'm really happy how it turned out!
Awesome video. Thank you so much for an amazing build. It shows and rides like a dream.
You are so welcome Omar. It was challenging in the beginning but the result was well worth it! And thank YOU for being such a great person to work with!!