- 13
- 94 616
Fixing and Making Things
Приєднався 18 чер 2013
Harbor Freight 3 in 1 press brake and shear
#harborfreight #metalshaping #metalworking #sheetmetalwork
Переглядів: 101
Відео
How to change a bandsaw blade
Переглядів 423 місяці тому
Install a new bandsaw blade on a harbor freight bandsaw #harborfreight #bandsaw #bladesharpening #bandsawblades
How to clean a dishwasher (Frigidaire)
Переглядів 984 місяці тому
This is how I clean our dishwasher, not a very had process and takes about 15 to 20 minutes. #dishwasher #homerepair #cleaning #pm #maintainance
Replacing a purge valve on a 2016 Ford Escape (P1450 code)
Переглядів 2994 місяці тому
The purge valve connects to the fuel system and this car got to the point that it either didn’t want to start, or it would miss a little after my wife gas. A couple days after it didn’t want to start, it through a check engine light and it was a p1450, which confirmed what we thought it was. It’s ran fine since I put it on if any thing changes I will do an update video. #fordescape #purgevalve ...
How to sharpen lawnmower blades.
Переглядів 3744 місяці тому
This is how I sharpen lawnmower blades, I hope this helps. #lawnmower #bladesharpening #sharpening #lawnmowerrepair
2002 Ford Escape rear door repair
Переглядів 88 тис.9 років тому
The Ford Escape is bad about the back door getting stuck and not opening from the inside or from the outside. What usually causes this is the drive hitting the unlock button the same time the rear passenger pulls the door handle. The video isnt great but I hope it helps someone figure out how to fix it. Thanks for watching.
That works, but I have a dedicated vacuum cleaner for cleaning the mill and lathe. It also helps keep the floor clean.
Great tip!
Looks good
What engine does your Escape have?
@@joellopez9154 it has the 2.0 liter engine.
@@Fixing-and-making-things Ah, I see. I replaced the same part on a 2016 Escape as well but the placement of the assembly was a bit different cause it’s a 1.6 liter engine. Also I didn’t have to remove the cowl to replace the part. I still found your video very helpful though, so thank you!
@@joellopez9154 I’m glad it was helpful!
What are you making?
A stainless steel tray for an apple cider press to make it a little easier to clean.
Gracias maestro! Tengo exactamente esa misma falla en mi camioneta, voy a tratar de repararla como tu lo hiciste!👍👍👍
مشالله عليك بي توفيق آنشالله يارب 🤲 ❤❤❤❤
This really worked!!! Thank you! Wish I found this video months ago!
This wasn't helpful at all
Both my doors in back on 02 tribute same thing. Tomorrow
It's the driversdoor
Should be the same process
Very useful tip, both of my rear doors where shut and now today I fixed them in just 20 mins
thank you for giving me a starting point to deal with my beloved escape. I will try this tomorrow!
I had the same problem with the Front passenger door I fixed it once and then it went doing the same thing again where the door wouldn’t open now I’m trying to do it again fix it it just won’t pop up do you have any suggestions on how I can actually get it to open thanks happy holidays to you and your family
I’ve had to fix mine several times the last time I just kept flipping it and pulling the door handle till it worked. Some times it takes a minute. Good luck and merry Christmas.
But I don’t understand what you just did to make the door open
Put the camera closer I can’t even see what you’re hitting thanks
Show more detailes thanks
I watched this video today, tried a couple of times without giving up and fixed the back left of my Ford Escape....Thank you very much
Using curse words makes it go faster. Fyi
Though the camera work is a little rough, it gives us with this problem a starting point at least so thanks for that. I have a passenger door that has a broken handle on the outside. I haven't tried it from the inside yet because I recall spending a bit of time trying to keep it closed so I could at least drive it. In the event that the inside handle won't allow me to open the door, this is a great video to allow me to try and get access to the actuator to get it open if needs be. Then I can replace the handle on the outside and I should be golden. Thanks for taking the time to do this vid. Might come in very handy.
I can here for the same reason. How did your job go?
i cant open my driver door its locked from inside end i have 3 days with this problem
I had the same problem with my 03 Escape... it was locked all the time. Then one day, my niece was visiting and she opened the door... and it has opened ever since. Now, this past summer, my niece discovered that the same door is now unlocked... all the time! No matter how many times I try to lock it (with or without the key fob/alarm), it will not lock! Even if the car alarm is engaged, I can open that door without the alarm going off. I have also tried manually locking it, but it just will not lock. Advice?
What about if outside door handles are loose like not attached or is that what also happens?
I have that problem too on my driver's rear door. The handle is broken and loose so won't open. I may have to use this if the inside doesn't open it up. The handle needs to be replaced on mine. Same with yours?
I really appreciate your video. I am going to try this tomorrow. I thought I was the only one with this problem! Thank you, again.
You are welcome
So this can work on a ford 2002 front door and how did you take off the screw on the side of door the panel
@@frankdelaneyjr.2631 Good to know. Thanks for the heads up.
You might not be able to fully remove the front panel if that's the case. Though I imagine it should still give you just enough clearance to get to the actuator, although it may be a lot more difficult to do.
And this works even with the child safety lock on? My moms 2002 the rear left passenger door has been locked for years. We are thinking it's the child safety lock stuck on.
AngelCortese1 yse it should still work
camera direction not to good
thanks will try!
thanks will try!
OMG! So even in the future they still use archaic methods. 2038/01/23. Little do we know LeBron James is president of that year.
Was gonna say "so fords still suck in the future"
whats the name of the part if doesent work and have to replace. thanks im gonna try this later
I was unable to flip the metal switch as you did, but I when I actuated the power locks while pressing on the metal switch it un- jammed and the door could be unlocked and opened. Hope this helps someone Thanks again for posting this.
How did you take off your front passenger door panel with the screw that's located on the inside of door while the door
Thanks for posting this. I can use my passenger door again !
THANK YOU BROTHER!!...
would this work on a 2008
Thanks for the video. You saved me a trip to the shop. I appreciate it!
Your welcome. Thanks for watching.
i can't really see what u did but i have the exact same problem on the exact same car in the video.... all i saw is u unscrewing the inner do. the rest i couldn't
+Ozzie Im sorry you had trouble with the video. There is a small metal switch beside electrical plug on the inside of the door that you have to get moving freely up and down. Hit the door locks a time or two after you flip it down and the door should come open. Sorry again for the video quality my video glasses were the only thing I could use in such a tight space. I hope this helps.
Thank you for this video. It is much more helpful to have a visual than try to understand the repair book. I would have felt incredibly dumb going to a shop to have this problem fixed! My passenger side (front and rear) doors have jammed on my '02 Mazda Tribute.
Your welcome
+Heather Schuchart Mazda door locks/handles are made the same as Fords
Would this work on the dront doors as well
Yes it should work on the front doors as well.