Відео

What if you miss your exit and need to go around again?

Terrifying

thanks

Where to get the guide

Bro i got the same bits in my oil. Is there a quicker way to do this? I got 9 nine days. Grtz Dennis

Is there any way you could add to this video and address the convoy of cars attached to each other travelling through the roundabout from your left not giving cars to the right the right of way to enter said roundabout now is it a rule to convoy behind the car in front of you with the ten other cars that are doing so or should you give the person to the right the right of way and stop? As I sit , here, stopped at a roundabout, watching 10 cars pass in front of me from the left whom are not all in the roundabout, but coming from the same direction the street to my left please address this and make it very clear that you don’t convoy through the roundabout with the ten other cars

way too long-winded

Any suggestions on removing the hub over the damper from the wheel? Mine is stuck really bad and i dont want to scratch my wheel powder coat

I train school bus drivers. We signal at entrance and exit.

Thanks for the video! Where did you buy your damper!?!

A great explanation that I will share. Ran across round abouts on last trip to the Ottawa region. Before retirement, was 24 years major city transit operator and many other years trucking. Had never come across one. Was a little confused about the rules. Again thanks for this.

The video I was looking for. You need more likes 🙏🏾

Thanks for responding why they need to be replaced when old. That's settled it for me, I'm about to do mine.

I took my knowledge and driving test in 2020 and the instructor did say you need to signal when you get out/get in any parking spot. So I can just imagine about this.

hi, I found the same black parts in my oil, based on your video I reduced my valve cover and my chain guide was fine. What else can it be and where does it come from? I'll rinse through it again like you and search my oil pan. What else could it be apart from the chain guide, which is fine with me? I drive a 99 zx7r. I would appreciate an answer. Nice greetings from Germany.

Nice informative video thanks

I want to love roundabouts but I have only been driving for 2 years and the make me so scared. I appreciate the Canada/Ontario specific video.

Hear, hear on the recommendation by the creator of this video to mandate signalling. Something that should be adopted in law in every North American jurisdiction (US and Canada) where roundabouts are sprouting is to enforce the British rule of "signal in, signal out". Upon entering the roundabout, use your left blinker an d keep it on until you reach the leg where you'll be exiting, when you signal right to those behind you that you're leaving. This Canadian learned the "signal in, signal out" when first driving a modern roundabout during a trip to the UK in the early 80s. Now that they're appearing in my area, I follow this rule, and have noticed that I'm not the only one. It's sensible as well as being courteous to fellow motorists. I fully endorse this videographer's suggestion on mandatory signalling.

These are stupid! Stop building these!!

If you are side by side INSIDE THE ROUNDABOUT and you are in the inner lane, if the right hand car wants to go straight, and you want to exit, you then SIGNAL RIGHT, WAIT FOR THE OUTER LANE TO CLEAR, AND THEN GO? I almost collided with a car a couple years ago because I was in the outer lane going STRAIGHT, and the inner lane car took the first right exit. We were side by side and he didn't wait for me to pass, but turned into the exit immediately. I was paying attention, so I had to turn right as well, because I didn't know what to do. So whate should I have done? Should I have yielded to the inner lane car to turn right? Or was it his job to yield to me going straight?

I’ve nearly been nailed in these things 4 times in the last 12 months. For some reason people don’t understand that if your in that outside lane you cannot keep going around the round about cuz they cut people off trying to get out. It’s happened to often now I’m in the inside lane and I want to go straight through the roundabout and then the person next to me in that outside lane decides there just going to keep going around and try to take the third exit and we nearly crash into each other. Drives me nuts. I mean the arrows are Painted on the road telling people which exits they can take depending on what lane they are in. It happened today with my 4 year old in the car.

You do not have to indicate if you are going straight

I couldn’t get my old washer off either. It was so thin you could barely see it. I put a new one on top of it. This is my first time change the oil in the Nissan rogue. Obviously the dealer has used this several times because there’s no way they put a new crush washer on last time they changed our oil with it looking like that.

I didn't change it after my first oil change and it was trash. I'm definitely changing every oil change now. Maybe I tightened it too much, but don't wanna risk that again.

Talks about crush washers. Doesn't explain how to install a new one. All I wanted to know was the right orientation to put the new one on b/c I've never used a crush washer. What a quick tip.

round about's are the most dangerous thing put into the roads in canada there ha been more accidents in my area. from maybe 10 crashes a year to over 300 a year now since they put those round about in. and the make you waste fuel by slowing down then speeding up again. so you have to stop at a pump sooner. I've noticed my once 2 hr drive is now 45 minutes longer because i have to slow down for round about's in the middle of no where!!!!!! main reason is we never had them before now they are adding more danger by distraction by have to take your eyes of the road to read a bunch of signs that are posted at the round about's. and I've seen more road rage @ round about's. and 6 deaths so far from the round about near me!!! But I never seen the deaths in the news from this one round about.

Where did you get this guide and how long did it take to get to you

People in the roundabout have right of way and you must yield for them. Therefore, the people in the roundabout must signal their intention so the people upstream yielding know they can safely enter. That is why you signal right only when you leave. It tells the people at the next entrance that you aren't going to T-bone them if they enter the roundabout. If the people waiting to enter do not see where you entered (sometimes the case with roundabouts with mounds in the middle or poor lines of sight) a left turn signal means absolutely nothing. It actually means less than nothing because depending on where you are the law may state that if you are making a U-turn or staying in the roundabout for more than a single lap in the inner lane you should keep your left signal on to signify this, not to signify you are making a left turn. IE. you keep it on and immediately switch to your right sign as you approach your intended exit. Also NEVER EVER EVER EVER SWITCH LANES IN A ROUNDABOUT!!! You will cause an accident! I have seen so many accidents in these roundabouts and they always come down to people changing lanes or signaling intention improperly. Roundabouts are fast moving systems and they require a high degree of communication and coordination to function properly.

Thanks. Yesterday I faced a roundabout first time. I was following GPS. I got so confused I was supposed to turn left but went straight through 😂 thank God there was no traffic 😃 but now I understand from your video. Thanks again

What do you think about those crush washers all over can you replace the oil o-ring on your drain plug and use a crush washer

I am manufacturer supply all varieties of oil drain plug gaskets, pls contact timothyhsu888@gmail.com for more details.

A good tip !

To me the fact that there is no direct signaling required for the purpose of the roundabout negates the whole purpose of a controlled intersection where in the parties can't be held liable for infractions for safety, insurance, or law, all of which are stipulations imposed upon every driver. It doesn't make sense that the rest of the roadways have these stipulations but when you enter into a round-a-bout its like a wormhole. Not trying to be a dick and I understand the points you made at the beginning. It's just incredibly bizarre from a logic stand point. Also, do you really trust other people to be honest in this scenario?

What side does the flat side go ? Against bolt head?

1000$ driving school didn't provide half of the info I found here. Awesome work man.

is it a violation if i don't exit and keep going around cuz I missed the exit? are you allowed to U turn by going around the roundabout (4th exit)? are there 3 lane roundabouts in ontario? what to do in that case? are there roundabouts with more than 4 exits in ontario? which lane do i take? can you overtake in the roundabout? vehicle approaching already in the roundabout left lane, so i yield to let them pass before i enter in the right lane. but they're super slow or perhaps even stopped, do i have to match their speed or stop even though they're in the left lane i'm in the right lane? if not, what if i pass them in the right lane and it turns out they're trying to exit the roundabout (1st exit relative to me) and i'm going straight (my 2nd exit) leading to a potential collision. who has right of way?

Defenzivnim načinom vožnje možete značajno pridonijeti sigurnosti u prometu na našim cestama.

Thank you. This video actually made sense.

Thanks for this! Super helpful

I recently changed the clutch plates on my 95 zx7r the clutch slips when I twist the throttle, i literally took it apart like 20 times already every time it gets slightly better. I changed to a different oil. Stiffer springs, changed hydraulic clutch fluid. Summer is near i cant get the damn thing to work right lol

Did it work ? 🤷🏻‍♂️ also which sealer did you use ? Thx good vid 👍🏼👍🏼

Are washers/gaskets all the same size?

can you go round and round in the inner lane?? lol

I am sure it's get dangerous and illegal to signal left. unless for a car is right behind you, just before you enter, at round about with only 4 exits. if you on the round about, and I am yield for you and you signaling left I don't know where you going because I don't know where you entered. just signal right before you exit

i used my my washer over again for about 40 000miles worth of riding. good thing i didnt rip the threads out of the oil pan. again i thought it was part of the bolt too lol

Good tip..Cheers buddy These are so cheap, it's shoddy not to change them. It's always best to do things properly 👍

I had this on my 93. Some of the pieces were lodged in the timing chain area. I put a new guide in and hopefully the new part is updated and won't break down like this. I kind of regret putting a new one in as it ran without it and could clog the pickup again.

My 93 bike had this problem. I regret it but I put a new chain guide in the valve cover...did you?

Ah makes me Want a Kawasaki again. So simple so smart. Just changed Timing chain on My Suzuki GSX 600 f and boy can't praise the Side chain over Mid chain enough...

Just how did you get it off. I couldn't budge mine, even get a box cutter blade between it and bolt. I have a few new washers and don't want to use old washer again. No leaks so far at least.