Відео

I spent all weekend trying to get this SRL Mesh into my Shoei GT Air II. No success. Your video helped by showing the antennae installation and I will give it another shot before returning the unit.

What did you the with the air filter? Did you reinstall the flap. Or was it still in? I am trying to go back to original as well.

Epic !

Mulțumesc prietene pentru videoclip! Mi-a fost de mare ajutor!👍🤟🏍️

Most unbearably noisy helmet I have ever owned! 6D is like being permently stuck in a wind tunnel, even with plugs in. I'm trying to find why. Everything looks pretty cool, except the visor doesn't seem to seal 100% around the rear/sides. Perhaps wind is slipping in here. I'll have to sell it on if I can't figure it out. Bought a hjc 70 - it feels silent compared to 6D.

I run 6D for motocross and I’ve had to test it out multiple times and I’m glad to say the Omni directional system works very well

Then run the servo eliminator

Nevermind I have it right if u leave it locked on down position it runs like shit till u hit 8k if u leave it all the way up it's awesome

It's currently locked in the str8 up position

Hey man I took the servo out which position should I leave the valve locked on

I went to Sena Motorcycles and it said the web site is no longer available?

what is the different between this fan and Milwaukee-Eight Oil Cooler Fan

Please, I also own a BAIC 929, and there is a malfunction in the piece responsible for moving the wires. Is it possible for me to cancel the gate and install another piece that is closed on the side so that the four pipes are open with each other and there will be no error or imbalance between them through the gate?

I’m sorry but how do you know the 6D is safe , made in china?????👎

I haven’t seen any tests being done so how do I know it’s safe

Does this work with first generation Neotech II?

I’m that poor guy but your commentary is absolutely hilarious 😂😂😂 immediately subscribed keep making videos man!

Great video bro! I’ve just rebuilt my 2002 954 and also couldn’t find any info on this. A great help, thanks. 🙏

God just put it on the damn bike....all this yadda yadda yadda

U suck

U suck

Good stuff. Yes, a throttle body, and manifold is an important addition to the “Modified Stage II”. Along with the cam plate/pump/tappets/tappet cuffs/push rods/Timken bearing/Power Vision/ and of course a killer cam. I’m running a Woods 22XE on my 2020 Fat Boy and came to your video because I decided I should have added a manifold. I’m going follow my initial instincts this time and dump a Thunder Max on my Road Glide 107 to S&S 129 build. Please don’t edit out to much because each teaches what to do as well as what not to do. Great video! ET1(SS/SW/MTS) US Navy, Ret.

Great video Mate. I could not have installed my system without your video explanation. Well done and thanks. Cooee from Australia. Ride safe.

How did you get those cheek pads on so easily? I have been trying for like an hour and cannot for the life of me get them fitted

How the heck do you not have more views on this. I too have a Shoei 1400 and a NEOTEC II. I'm always looking for a alternative to Shoei just so i'm not a Shoei fan boy. My local shop guy sells 6d and told me about how they are part of the nfl helmet make. You kinda made it look cheap at a expensive price. I think im going to try the Arai. Cheers and great video.

Weird comment from BretGash but anyway. I like this comparison I'm a Shoei guy but have always been interested in the 6D's tech. It's hard to beat Shoei in terms of quality they just make great helmets period. I picked up a 6D for the first time at a local store and didn't think they felt too bad in terms of quality, But I didn't compare them directly to Shoei. In terms of safety it seems hard to dispute something that can soften the impacts like that. Snell seems a bit outdated and too hard in terms of what leads to concussions. Have you been using both?

Sounds to me that because the 6D wasn't just like the SHOEI that it's not as good. Your next helmet should ve a SHOEI

New phones and other devices require updates for compatibility and occasionally a new feature or two could be nice

Could you tell me the torque value on the 3 throttle body screws? Thanks

Sound quality after the faff of install is impressive though :).

Just fitted this kit to my gt-air2. Absolute pain in the arse getting the mesh antennae inserted into the lid. Trying to cram it in on the left side was a nightmare as it just wouldn’t go between the inner and outer lid layers. Got it in there in the end though the wires got in the way of the cheek pads…. Faffed about but managed it in the end….

By far the best installation tutorial - thank you

What I'm trying to tell you is "it comes with some recycling". GOLD Thanks from Australia mate!

Most of it was pretty straight-forward but i wasn't grasping the antenna concept, even looking at Sena's installation diagrams. Your video helped me to figure it out so much thanks. And ride safe!

There is a tool in the box when you purchased the helmet.

I have a sportster. I ride 100% on surface roads. It’s been a blazing 115 ever day for the summer. I ride about 45 minutes home and I can feel the heat from the bike, the road and all the cars around me. I’ve got my helmet gloves backpack long sleeve shirt on. My bike rpms drop to 980. I ride it hard and yet to see overheated temperatures. I’ve gotten home and took temperatures with a laser temperature gun and and I took a food thermometer and stuck into the oil with engine shut off. Still at the operating temperature you should see. If you run it too cool you will tell the ecm to put more fuel in to get it warmer temperature. Bore wash incurrs

Needs a set of tab mufflers Go for the medium baffle if u don’t want it too loud but will come up some when u get on it Has deeper tone than the zombie baffle I just did the 447 SE cam 2 weeks ago. I’m actually blown away (low expectations from the SEPST and mild cam and catted head pipes .. first new bike wanted to keep Warranty on SOMETHING) How much power u make ? My 107 did 93hp/111tq

thanks for the install video, I wasn't sure about getting this unit for mostly music since I don't really make calls while riding and since its kinda pricey but I think its almost a shame not to get it when the helmet was designed so perfectly to incorporate it. Plus, I don't really like when helmets have the little Bluetooth jawbone device, seems super dated and too much like cab drivers who always have an ear piece in haha

Does siri work with the sena?

Without an oil temp gauge how do you know its any better?

Did u have to retune after install

My Helmet Sena unit does not have that dongle, it just uses a micro usb.

Thanks for the video, it is very useful. How is the audio quality of the mic? Can the others hear you well? Does it work with Cardo system? Can you use it to record audio on your phone?

Thank you for very straightforward installation tips!

Thank You very much bro

what kind of tuner did you use for the cam and intake install???

Your video was the only one I found that showed the FM antenna installation. I must have watch 10 before finding yours. It was so helpful, thank you!

i believe my cbr600rr has the same calipers so i'll use your video as a guide to rebuild mine. thank you so much

Does it use the factory cover?

Hey OTW, I believe after watching several videos you are the only one that I have seen that replaced the Manifold to head gaskets,, I myself can't understand why more people don't , that is a known area for leaks,,,good video. I didn't catch if you did or not but these things need to be cleaned before install , a lot of material left on the insides.