Відео

@@MitchBollig I want to say I dislike the man but you have to give it to him ... He makes a quality knife! I would put Les George at the top tier level, but maybe he wasn't making knives when they came up with that Trinity thing? Plus Mr George is just a really nice guy. Thanks again for watching and commenting

@@MitchBollig I figured it made a lot more sense to break these into bite-sized videos because not a lot of people have an hour and a half to watch one long video. And yeah I've purchased knives thinking I would love them, and then for whatever reason, I just don't, or something else is just better than it that's in the same category. When you have so many good knives to choose from it's just hard to decide which one you want to carry over another great knife. At this point in time a knife has to be pretty spectacular for me to be carrying it over something else. While I've never traded knives I would be up for it if there is something that is mutually interesting enough to swap. Thanks again for watching and commenting

@@MitchBollig I really appreciate the kind words. I first discovered you with your review is the Zermino Tyre. I see you have really tricked that knife out correctly

@@mstuehler I love the kind words ... Thank you. I started this channel to share my thoughts about knives, and it's not about making quick videos .... It's about talking about what I think. There are lots of channels that tell jokes or make videos under 15 minutes that are much larger, but I'm just doing what I want to do. I don't make a dime off of this and put a lot of time into it but I am trying to provide information. Of course we all have our personal bias and I try and make that clear in the video. Thanks for watching and commenting.

@@MitchBollig thanks for watching and your comments. Not to get technical, Quiet Carry knives are manufactured in Taiwan, but I hear what you are saying. I might have to switch the XM24 to washers ... Great idea. I had an Eklipse on washers but I switched back to bearings because of the action, but the 24 has such a heavy blade maybe the action would be great?!?

@@appalachianadvrider Oh thanks! I honestly didn't remember about QC being in Taiwan. As for the XM-24...I can tell you from experience it won't get great on the opening (until probably 5000 openings when the washers smooth out), but it will definitely save the knuckle of your thumb. 🤜🤛

@@MitchBollig thanks for the info ... Appreciate it.

@@MitchBollig it's a great knife ... I agree. And it disappears in the pocket

@@EndlessLittleMoments not really ... the edge is slightly rounded.

@appalachianadvrider thank you, just found out about the firecraft that is similar but has a sharp spine, but this is definitely a better looker imo

@@EndlessLittleMoments check out the White River Knives Ursus Cub. I own all three of the knives we are talking about and the Cub sounds like what you are looking for. It comes with a ferro rod and a 90 degree bevel for striking. It's a good looking knife and around the same side as the Firecraft 3.5.

@@appalachianadvrider will check it out, thanks

@EndlessLittleMoments I have a fixed blade knife collection video with those knives in it. Check it out in my playlist. ua-cam.com/video/XYZKFEFwpdQ/v-deo.htmlsi=rL3fV7TdbD5b7LFp

@whatsthemonsterbelow sorry to read about your accident. Hope you have a full recovery. That's the best things about these knives ... You can get away with no maintenance for a long time.

@@WhoobieD Sorry to hear about that. I've come to dislike the brand. I have three of their knives and each one of them has an issue. That's unacceptable at any price ... But at almost $600 each ... I'm not buying another folder from them for a long time .

@@MitchBollig hey Mitch I was just watching your video on the knife of the year ... Too funny that I'm watching your video while you are watching mine lol. I saw that contoured scale for your Project X and I'm jelly. I have the battle bronze the version of it's like not going to go for a natural ti scale. And you were right ... That big Hinderer knife is the Ranch bowie. Couldn't remember it at the time. Thanks for watching and commenting brother

@@shamusmcinky4882 I love the fit and finish, the blade shape and the design language. The clip kind of sucks though, so it's preventing me from carrying it more. It's still new and maybe it will grow on me. Thanks for watching and commenting!

@@stevendeary502 it's an aftermarket scale but that's the standard lanyard hole / tube.

@@alexdillon6980 I agree. In Strider style, it melts in your hand. Considering it's such a small knife I'm impressed. But it didn't come in sharp, but fortunately I had the ability to put a nice edge on it. Thanks for watching and commenting.

@@valrai2752 it's growing on me once I put a good edge on it. It's a very expensive small knife but I'm amazed by its ergos and it fits nicely in my rotation as an office knife. Thanks for watching and commenting! It helps the channel out

@@TacticalVillain USA Made Blade has one left as of this second

@@madman94 that knife is the Kunwu Padre, and I already talked about it in a previous video in this series (It's in part 4). I started talking about it again and then I remembered that I already talked about it, so I cut it out of the video lol

​@appalachianadvrider ahh, cool, thnx for clarifying... I really like that model, catches my eye everytime, I'm mostly into customs/really high end production but maybe I should grab one regardless. Thanks again, enjoy your content 🍻

@madman94 I say in one of my collection videos (part 4) that if I had to choose only one knife that I own, I would choose the Padre (in an urban / non apocalyptic scenario of course lol). I like it's overall balance for how I use a knife ... For food prep, camping (feather sticking etc) and wet environments. I love the steel, that sheep foot belly, the pointy tip, and it's production values. Thank you for the kind words, for watching and for commenting! Happy New Year

@@madman94 what is a couple of makers or models you would suggest I look into?

@@HindererCollector41 they are my favorite "come get some" brand! Thank you sir for your comment and for watching

@ your welcome sir I have 3 PX ONE IS A PROTOTYPE

@@HindererCollector41 wow ... I'm super jealous! I had to wait over a year to get one. Do you have a Ti scale for any of them? That's my next mission ... Get a Battle Bronze scale for this one and a great scale for my XM24

The PX is my favorite Hinderer by faaaar. It's the best quality I've seen with no rock or play, strong detent, good factory edge, etc. I've sold my other Hinderer because I never chose to carry them over the PX. I agree with the preference of external stop pins.

@the_swinging_axe appreciate you watching and commenting. It's a great knife for sure. Did you own an Eclipse? That one still has better ergos in my humble opinion

@@jyknyc I don't think this company makes any left handed knives now that I think about it. Everything they do has a frame lock, and lots of their knives don't have any attachment points on the show side of the scale.

@@satudave yeah I actually purchased that knife in middle school but carried it regularly through those many years. Thanks for watching my friend. Since this video I have received three more knives (like you said in your latest video lol). Happy new year my friend.

@@Damen0530 They are made by Rockscale design and they have a website

@@appalachianadvrider Thanks!

@Damen0530 anytime brother

Yeah there are a couple reasons. The 3" Mac 2 sliced my hand when I reached into my pocket to get it because of its weak detent. The 3.5" one is a guillotine. The pocket clip sucks and I get douchebag vibes from the maker. He made a different clip to replace the sucky one, but it's going to cost you. When they changed the lockbar design from a perfect spacing to having a huge gap, the maker was saying it's a better design. That automatic knife had a horrible point to it - it wasn't even pointy. These knives are almost $600 and I feel for what you are getting it's overpriced. I don't know - I'm just not a real big fan. Have lots of bad tastes in my mouth, even though I know the community loves this brand. I don't. I normally don't make value statements, but to top it off, I feel there are so many other knives that are a better value by far. It's just my opinion and I am in the minority and that's fine with me lol. Of the three knives that I purchased, they all had issues. Thanks for watching. I am going to tell you my unfiltered opinion and that the value I hope to bring to people that watch.

@appalachianadvrider Yeah man totally understand that! I hate soft detents! For a 600 dollar knife that's a freaking deal breaker!

@@chrishall1407 I hear that. I wear a 2XX sized glove and I'm concerned about grabbing it too high. For me I can flick it open just fine, but I certainly have to reposition my hand and I understand what you're saying. A little more real estate would have been good, but then it wouldn't be a "gentleman's" sized knife maybe?

@appalachianadvrider I guess the lct will be the next purchase. I had to get this first because I already have a lot of drifts. 😂

@@chrishall1407 love the LCT, especially using the reverse flick. I can't really thumb flick it (though I've seen others do it) but I can slow roll it out. I would say if you hate a hole opening then you might want to think about it. I love that it's much heavier and thicker in the handle with the contouring.

@lionknives3 woohoo ... Thanks for watching!

@@Knifeaddict13 i think you are right. It's hard to remember all the details of everything. Appreciate the info and thanks for watching

@@satudave the last video has a couple of Striders, which I know you are familiar with and probably over lol. I watched my 2023 collection video before I filmed this one and I'm amazed at all the editions .... And I wasn't buying knives the first half of this year! Thanks for watching and commenting my fellow knife freak

@@THExDUDEx8624 I can understand why people would like tip down. I have no delusion that my opinion is the only one that matters lol. I will tell you that I had two Elites and the first one I returned because I would catch the tip of the blade with my finger when the knife was closed. The first version of it was really bad, but the knife they replaced it with is also bad, but not as bad. I actually have a slice on my finger that's still healing right now from that Elite as I was trying to pull it out of its pelican storage case for this video. I'm just not a fan of cutting my hand 😂 Thanks for watching and commenting

@lionknives3 glad you are enjoying the series. I think breaking it up into five parts makes it easier to digest, so you don't have to find 90 at one time to watch it

@@Pocket_Candy_Randy appreciate the kind words. I put a bunch of time into thinking about this one, as I try and do for all my reviews. Obviously unboxings are just my spur of the moment thoughts. Thanks for watching and commenting

@ I will get not get home until after the first week of January, where my Catch is waiting. Hearing your reaction to the first time you opened it was awesome.

@@Pocket_Candy_Randy I'm biased ... I like this company and like the steel. If someone only exclusively likes big and heavy knives then they aren't going to like this one. I have a need for a small light concealable knife in my rotation. I hope you enjoy it

@@Doughnutt_edc this is a custom knife and it goes for $695. Thanks for watching and commenting

@@jasonzimmerman1969 I don't have calipers and that spec isn't on the website. I have to pick one of them up one day. Thanks for watching and commenting.

@@jasonzimmerman1969 appreciate the thanks. I wanted to be one of the first initial impressions reviewers on this knife, but I did carry it for a while and wrote out lots of notes on it so I could cover anything I noticed about it, so I got time invested in this review lol. Thanks for watching and commenting!

@@musze3000able I'm with you in loving this knife! They keep on knocking it out of the ballpark! Thanks for watching and commenting

@@Knifeaddict13 I held a half track once and didn't love it but I might order it one day if I see it available at the right time. Would I normally like bigger and heavier knives and the skinny knife doesn't sound appealing to me. I'm not even sure I saw one available for sale

@@satudave he makes such great knives! I have a Project X coming, but the post office sent it to Austin TX from NC

@ ain’t that just the usps way🤣. Project X is one of my favorites 🤘🤘

Quiet Carry makes some really impressive knives and their quality is top notch.

@@W3OY-RAY I have to get to it ... Thanks for watching!

@@thedude301 it's a real interesting piece. The knife has a patented detent system found no where else, so the action is really nice. The blade comes flying out. And I love a tanto blade. Thanks for watching and commenting

​@@maahes9561 appreciate the kind words. I do say that even though it's an early lockup it's a frame lock and should be fine. Thanks for watching

What is the name of the model ?

@@michaelmizzoni3458 "The Catch"

@@Thomas-dz4eg what's not hard to find in Canada is smoking hot women. I went to college near the border and we used to go into Toronto often and there must be something in the water because there are so many beautiful women there. I remember hearing the was all kinds of import restrictions with knives coming into Canada and customs was seizing them. Maybe that's why business didn't want to ship into Canada

@@rustyshackleford5331 yes they are a solid brand if you value a simple and functional knife. They have gotten really popular this last year and I'm happy for them

@@chrishenning8829 it would be plastic and not kydex bahahaha

@@satudave thanks my man! I don't have too many customs, but maybe that's because I don't know everything that's out there. I learn about customs by watching your channel lol

@@satudave I meant to add that because this knife is so fat I'll probably never carry it, so I'm not going to invest in trying to fix it. Maybe one day I'll sell some knives and this will be one of them. Thanks though Dave!

3 more to go! Thanks for watching brother!

@@samburk7509 Quiet Carry makes awesome products. I plan on filming an impressions video of this knife hopefully tomorrow, so I'll reserve my thoughts for the video. Stay tuned. Thanks for watching and commenting!

Me as well, I really love this knife!

@@satudave Dave ... I watched your collection video where you said you were going to rename your channel, but I commented under my real name / profile so you probably didn't know it was me lol. I'll be releasing one video a day for the next 4 days, for a total of 5 videos. You definitely gone in a different direction on what you like over the years, so I'm not sure I have much that will appeal to you, but I appreciate you watching and commenting!

@ I really enjoy seeing and hearing about other people’s collections. If we all like the same stuff I think it would be boring. I actually take pride in being an odd one

@@anthonyamato1983 it's a real interesting piece. It's laser sharp and real ergonomic. Congrats on your purchase. Let me know what you think of it. It's different but I love it because it's different.

@appalachianadvrider cool, will do brother