Відео

Nice! Now we need to see a head to head comparison between this and the K2! Not only is there a MASSIVE price difference, but which is the best at it's job?

It's a K1C without enclosure ie. K1 SE "Sans Enclosure"

Can you share the arduino code used here

Can this be used by other slicers from a PC/Mac/Linux? - like Cura, PursaSlicer, OrcaSlicer? and have the slicer monitor the printer. I do my slicing from a computer, and then print, Don't really use my phone in my workflow. I don't want/need my printer to be connected to the intranet - just my local network to my computer - can files be sent directly to the printer without going through the cloud

How to upload a file to the box, to have it printed ?

Not really a review more of an overview. Did not include initial setup, fan noise and print quality with different fillaments. Also not inluded is Noise levels of fans

can you use k1 files to print on the k1 se

How did you raise the initial step you skipped over to the screen protector install without showing us how to raise it

Whats the screen

Hello, first of all thank you for your great video - that's exactly what I was looking for. My question in this regard is: I can find the CNC shield board you used everywhere. But unfortunately I can't find anywhere the possibility to buy the so-called break out boards that you mention from 5:22. Instead, the CNC Shield Board is always offered with driver steppers. Question: Can you tell me where I can buy these, or are they perhaps better known under a different name? I would appreciate your feedback - many thanks in advance.

i have Ender 3V3SE 3D Printer will this laser work on it ?

Is the k1 SE more rigid than the k1c with these 4 brackets and side bar?

Is this module compatible with Ender 3 se ?

7:28 did bro just give us his ip address😱😱😱

what temperature do you use for pla? i use 200c for extruder and 60c for bed, and it is always oozing and messing up

I want one!!!!!!!!!!!

My Ender 3 v2 neo just broke down, so I decided to go for a new printer. After some looking around, I settled on this one. So I hope it's as good as people say. XD EDIT: Yes it freaking is. There is only one thing I would nitpick and that's the extruder. If you misjudge the Z-offset and set it too low, the motor is powerful enough to make the plastic extruder crack, so you might wanna change it to some full metal one. Aside from that, it works PEFECTLY. I especially love that it uses nozzle itself to detect the Z zero, not some BL Touch. Also, people keep saying you should use "Community framework". I honestly don't see why. First, the printer works perfectly with the vanilla framework. I just updated it to the latest one on Creality website. Second, no matter how I looked, I couldn't find any cohesive manual on which framework to use. Not to mention there were like 4 different developers, each claiming thiers is the "Community Framework". So I just let it be and use the newest Creality framework. Works just fine.

Thanks Helped me to find the answers of my questions And know I'm going to get this printer ❤️❤️

Im using m5s Pro, and I constantly gettin force lift error. Printer is leveled using high speed resin with 1.9 exposure time. What I am doing wrong? It only prints the bottom layer.

What slicer do you use?

Got one. It failed after 14 days. Retailer wouldn’t refund. Creality said they didn’t have any parts to replace ruined ones with. I have a $250 paperweight. Terrible CS.

How did totoro turned into a dragon?

Imagine putting helpful instructions online so I can print via WIFI!!! Not Bluetooth. And from my computer. So many tools on youtube now.

Damn that looks good

Are you back to printing in resin?

,

Cani make pcbs

How come Cron doesn't have a website for their products?

this is basically resin lol

You left out the voltage input settings switch. Very important!

Im trying to find something on these breakout boards. I have been googling them for an hour now. Where do you buy them? Can I use the stepper drivers I already have on my cnc shield?

Did you have any problems giving access to the external camera on the Creality scan software?

That definitely would have benefitted from sanding. The visor, for example, isn't as smooth as it could be.

Pro tip the Wyze v2 cam with webcam firmware works with this box

I don't understand why the device needs a wired connection to Ethernet since it has a wifi-module.

What is the purpose of the 24VDC going into the CNC Shield board?

Does this work with all motherboards, I have the original 1.14 on my Ender 3 Pro?\

How do you set the jumpers on the CNC Shield board? How you anable the CNC bord?

i have just got the photo mono5s pro iam trying to print with washebal resin and keep getting fail and now i cant get a print with anycubic high speed resin any ideas

Thanx for these tips. Just starting in 3d printing and am learning alot at the moment!!

Tremblay Wells

Im surprised how your 600 test turned out considering it was just a typical PLA.

Where did you set the jumpers for the steps?

Nice installation🎉🎉

I just started using mine over the weekend. Love it. I still have a lot to learn, but am happy with the results thus far.

thanks for the video. is there a way to print multi color in a way that for instance a head will be white and eyes will be black ? or only if I print in 2 different parts then assemble them?

Great video!

I really hope nobody is 3d printing cups. Youre just directly drinking microplastics at that point.

They awesome printers but seams as though the bed sizes are just getting smaller... My old CR6SE is bigger than this and I really need to go even bigger for some prints. My heart was set on the K1C but the bed is much smaller. The K1 Max would be awesome, but the price!