Відео

@@Captainfab406 I’m willing to bet at the same facility this was made! It’s too much like my old hi ram haha

@@DubJ3112000 the a pillar has a tube that runs down behind the dash to a sandwich plate that ties into the frame and ties into the door bar. This jeep has been on its top a few times. The b pillar also ties into the frame and cage in the back. The cage is pretty stout. The frame is cut behind the seats and the rest is tube in the rear. The front is cut about 10” inches front to the motor mount and is all tube up front also.

@@DubJ3112000 I’m tall so I don’t mind the taller cage. I think roof line is 78” and the Belly is like 23 1/2 inches it does decent for the wheel base it’s around 111”

Haha! Fitting name

Mine too finally came true

@ awesome!

I guess I should just embrace the cheap 😂🫡

Can’t wait for the weather to get a bit better so I can get some seat time on it!!

@@DegenerateDirtbags I ordered them from factory mini bikes! Highly recommend them great company

@ then you just putin the details that you want pink ?

@ you can msg them The colors and stuff you want on them. They are custom made decals specified to you. Just tell them the colors and how you want it and they will send you a sample via email and you can change what you want. Or call them and go over how you want them

@@CharlieMason-vd5is I didn’t. I glued one. The one that spun and I probally couldn’t have gotten away without it

@@chriscorv58 I had to remove the upper a arm. Bolt the shock in. Jack up on the lower and bolt the upper back in. I’ve had 3 sets of coil overs on this car and all 3 I had to unbolt the upper

Thanks, I ended up doing just that. I did end up having to preload the lower control arm with a floor jack to get it to bolt in. Haven’t put the car on the ground yet. What did you think of the height of the front when you were finished? I’m going to try and get this buttoned up this week but something tells me it’s going to sit really high. Are you happy with the suspension overall, has it improved traction for you?

Just spawn a can bearing on my 60 with a BTR stage four truck cam. Funny enough I had no idea the bearing was spun. I was pulling out the big cam to throw in the summer racing cam I started to have a hell of a time pulling out that camera and I’m like what is going on Turns out I had a spun can bearing. Had no idea Looks like I’m pulling my motor

@@chazgeisler6213 same here. I took this motor out to do Tbss intake cam and 243 heads and the cam wouldn’t come out so I pulled the motor too 😂

@@chazgeisler6213 I like the summit stuff I think I’m going to get their pro LS pistons for the fox body motor

@@seancaron3323 trust me I’ve thought about it!! I just know I’ll have it crashed in a tree first time up 😂😂

I might one of these days. I have all the tools to ❤

The balance point is a bit different and takes a bit more effort to get up. But it feels better than the stock swinger to me

@ I have one on the way. I have heard from some that it feels better doing wheelies with the BBR swingarm. Thank you for letting me know.

@@charlesgarcia4928 I got the light bar from factory mini bikes and it’s running off the factory battery and stator setup

I hear it’s pretty typical In the gen 3 truck engines

@@Thisappaintreal haha thanks it’s a ct5 Black Wing pretty neat cars!

@ I thought it was a black wing haha very neat indeed!

@ yeah I’ve found not a lot of people know that much about them. Most are surprised when I say it has a supercharged 6.2!

@@lowrangelee I don’t see many on the road especially where I live but I did see a manual version at my local dealer and every since then I’ve had an eye for them

@ yeah pretty neat they still come in manual! Mines a 10 speed I see more manual ones than the 10 speeds honestly

@@adrepok yeah it’s a bit older than that. I ran the numbers off the intake. It came back 1979-1983. Truck was originally a diesel. Not real sure what happened to that engine

This one was 10x4 was 12x4 I cut some off of it. My other trailer is a 4x6 and it’s a lot better as far as maneuverability

@@shawnszilezy2439 thank you! Had to make it mine in my own way. I like different

😂😂😂😂

how is that gay that jeeps bad ass

Haha thanks I love the 3rd gen’s just so hard to find in decent shape one day I hope appreciate the support!!

@@dab0yhdizzle everything is in the description friend part numbers and all 🫡

@@lowrangelee thank you

Awesome! Thank you!

Thank you so much

Couldn’t have said it better myself

I think so too, thanks a bunch!!

same lol

Appreciate you man! I’ve asked all over and been on Google looking. Are you going to trail hero this year??

@@lowrangelee not looking like its in my cards this year! Cost so much stinkin money to get a truck trailer and jeep across the country.

@SamMatter I completely agree I want to come east. I grew up in Kentucky east coast wheeling just hits different. I’ll be east by spring somewhere for sure

I think you’re right. Just needs a little Love and attention and I think we will have a decent little rig here 🔥

@@lowrangelee it looks like a lot of fun!

@@clayjordan1596 taking it out tomorrow on a light trail see how it does make sure everything works right and don’t over heat etc. Then going to hit some harder stuff

Big thanks

It has 4 bolts and welded.

My thoughts exactly my awning room and clam big tent which is like a gazelle but insulated for ice fishing bc I do a lot of winter camping. You can sit a table and 4 chairs in it and get a card game going in bad weather. You can’t do that in any RTT

Title says 06 idk. What brand an arms are they bc the bushings are completely out and need new ones.

Im editing a video on that car as we speak :) Going to be doing some fox body content. Little no prep car action :)

@@3214cbad same here it always starts up right away and takes a heck of a beating.

Everytime I go out I find something I don’t use and I remove it. If it’s not something I use more than once a trip or not at all I take it out and don’t take it. Trying to minimize my setup to what I need only

I have two hammock tents. One is a haven safari xl and I love it when I’m solo but I’m hardly solo. I like my awning rooms and clam tent for sitting up some table and chairs in bad weather and sitting around and socializing. Or cooking

🫡 appreciate you

@@Leo-x1o1t nah she don’t care we currently still have one in the entry way by our front door 😂 pretty cool wife

@@Leo-x1o1t it currently has a broken shift shaft from a hard wreck at a pit bike race. Waiting for the part to come in and the mechanic to have a spot open to get me in to get it fixed. I’ll say it bent once in practice and we bent it back but it broke on a hard crash during a race. Other than that it’s been a tank has taken tons of abuse

I piggy backed it off the stock ecm. Had to break out the crank signal so the push button would work correctly. Used two ect sensors and 2 oil pressure sensors so the Holley reads oil and temp and the factory gauges still work. I left all the stock stuff in it. Just really need to break the crank sensor out so the stock ecm knows it’s running. I’ll do a in depth video if yall want me to

You’re more than welcome to hit me up on instagram for any further questions. All my social media is lowrangelee

The fat tire version is sick. I’m going to put a slightly bigger tire on the back of this one probably a mitas pit cross