- 76
- 441 320
Slicpartna
United States
Приєднався 15 гру 2013
My name is Derek
I'm an automotive enthusiast who enjoys repairing, improving and customizing vehicles
My goal for this channel is to share knowledge and motivation with my fellow automotive enthusiast around the world.
Building your own is priceless, knowing you created something. It is your imagination, your vision made reality.
Thank you for checking out my channel
Please like, share and subscribe
Working on vehicles is very dangerous, if you are not sure of what you are doing, please seek professional assistance.
I'm an automotive enthusiast who enjoys repairing, improving and customizing vehicles
My goal for this channel is to share knowledge and motivation with my fellow automotive enthusiast around the world.
Building your own is priceless, knowing you created something. It is your imagination, your vision made reality.
Thank you for checking out my channel
Please like, share and subscribe
Working on vehicles is very dangerous, if you are not sure of what you are doing, please seek professional assistance.
Відео
(OBS Chevy) Painting Exterior Parts (Ecstasy Orange Pearl)
Переглядів 332 місяці тому
Painting Chevy OBS hood, front fascia, side mirrors Paint Color: UreChem Ecstasy Orange
Review of the VEVOR Inflatable Paint Booth (29.5x19.7x13 ft)
Переглядів 1732 місяці тому
VEVOR Inflatable Paint Booth 29.5x19.7x13 ft Spray Paint Booth, Powerful 1100W 350W Blowers Inflatable Spray Booth with Air Filter System, Car Paint Booth for Car Parking Tent Workstation
(OBS Chevy) wet sanding primer before paint
Переглядів 2,2 тис.3 місяці тому
wet sanding the primer before paint music: Ikson Is It Song by TELL YOUR STORY music by ikson™ Link: ikson.com/tell-your-story
How to bodywork and prime a car or truck at the house (OBS Suburban)
Переглядів 5243 місяці тому
How to paint a car or truck at the house
Bodywork OBS Chevy Suburban
Переглядів 1139 місяців тому
starting body work on LS swap OBS suburban music: ikson escape
LS 383 Build (engine finally broke in and tuned)
Переглядів 45911 місяців тому
Engine is finally broken-in and tuned
LS 383 stroker first startup mild cam
Переглядів 1,7 тис.Рік тому
filled cooling system primed oiling system Track: Ikson - AM [Official] Music provided by Ikson® Listen: • #108 AM (Official)
LS 383 fuel injectors (benefits of having your fuel injectors cleaned)
Переглядів 163Рік тому
detailed information about having fuel injectors cleaned especially when the engine will be down for a long period of time music: IKSON (Love)
installing LS 383 in custom OBS suburban
Переглядів 480Рік тому
installing LS 383 in custom OBS suburban Music | "It will be ok" by LiQWYD Watch: ua-cam.com/video/tl_pB2r90bA/v-deo.html License: www.liqwydmusic.com/how-to-use Download/Stream: hypeddit.com/link/4qh2ja Music | "I Need You" by LiQWYD Watch: ua-cam.com/video/F8ioaRUlh2g/v-deo.html License: www.liqwydmusic.com/how-to-use Download/Stream: hypeddit.com/link/lp88yc Music by ua-cam.com/users/ikson Love
How to build a LS 383 from a 5.3 (fuel pump upgrade)
Переглядів 153Рік тому
upgrading to a quantum fuel pump QFS 340LPH INTANK FUEL Music | "Still Love You" by LiQWYD Watch: ua-cam.com/video/UemtIQh_wS0/v-deo.html License: www.liqwydmusic.com/how-to-use Download/Stream: hypeddit.com/liqwyd/still-love-you
How to build a LS 383 from a 5.3 part 9 (final assembly)
Переглядів 1,4 тис.Рік тому
final assembly of the 5.3 stroker
Sanden 508 compressor head repair
Переглядів 2,2 тис.Рік тому
how to repair the head on sanden compressor
How to build a LS 383 from a 5.3 part 8 (installing A/C bracket and alternator bracket)
Переглядів 388Рік тому
installing ebay a/c bracket and factory alternator accessory bracket
How to build a LS 383 from a 5.3 part 7 (measuring for pushrod length)
Переглядів 917Рік тому
How to build a LS 383 from a 5.3 part 7 (measuring for pushrod length)
How to build a LS 383 from a 5.3 part 6 installing (ARP head studs and Heads)
Переглядів 4,4 тис.2 роки тому
How to build a LS 383 from a 5.3 part 6 installing (ARP head studs and Heads)
How to build a LS 383 from a 5.3 part 5 installing (camshaft, timing set and oil pump)
Переглядів 1,3 тис.2 роки тому
How to build a LS 383 from a 5.3 part 5 installing (camshaft, timing set and oil pump)
How to build a LS 383 from a 5.3 part 4 (RODS, PISTONS AND RINGS)
Переглядів 9722 роки тому
How to build a LS 383 from a 5.3 part 4 (RODS, PISTONS AND RINGS)
How to build a LS 383 stroker from a 5.3 part 3 (clean block and install crank)
Переглядів 7 тис.2 роки тому
How to build a LS 383 stroker from a 5.3 part 3 (clean block and install crank)
how to build a 383 from a LS 5.3 (rotating assembly) part 2
Переглядів 6 тис.2 роки тому
how to build a 383 from a LS 5.3 (rotating assembly) part 2
How to Build a 383 from a LS 5.3 - Part 1: Disassembly
Переглядів 5 тис.2 роки тому
How to Build a 383 from a LS 5.3 - Part 1: Disassembly
OBS suburban with custom upholstered leather seats
Переглядів 4472 роки тому
OBS suburban with custom upholstered leather seats
LS swapped OBS suburban show truck build (interior part 4)
Переглядів 1,1 тис.3 роки тому
LS swapped OBS suburban show truck build (interior part 4)
92-99 OBS blower motor replacement/cleaning the evaporator core
Переглядів 53 тис.3 роки тому
92-99 OBS blower motor replacement/cleaning the evaporator core
92-99 OBS rear brake and wheel upgrade/update
Переглядів 1,2 тис.3 роки тому
92-99 OBS rear brake and wheel upgrade/update
92-99 OBS Chevy rear disk brake conversion
Переглядів 60 тис.3 роки тому
92-99 OBS Chevy rear disk brake conversion
LS swapped OBS suburban show truck build (interior part 3)
Переглядів 6593 роки тому
LS swapped OBS suburban show truck build (interior part 3)
OBS suburban show truck build (interior part 2)
Переглядів 2703 роки тому
OBS suburban show truck build (interior part 2)
Nice upgrade dude I'm doing my too. Thanks for the vid 😊
@@FSEVENMAN let me know if you have any questions Thanks for watching
Very nice!! How can I contact you fam
That color is magnificent, I never seen anything like that on a suburban it's different and would be the first.....
@@kendallsprolls6844 thanks for the compliment It is different for sure, that was my goal I want it to stand out from everything else Thanks for watching
CAN YOU MAKE ME ONE?
Nice video. Thanks for the detailed instructions. My actuator is sticking, so while I’m fixing that, think I will check my evap. Don’t get a lot of flow like it should. Keep up the great work.
@@jmill7450 let me know if you have any questions Thanks for watching
@@Slicpartna sure will. Ty sir !!
May i know what are the specifications of the 2013 kia forte lx front and rear brake pad and rotor?Thank you
@@JulianFranceManiego I don't understand the question
Where did you find a motor with both connection points? We are only finding one prong blowers
@@heavymetalkennels8963 I got my replacement motor from rock auto Let me know if you have any other questions Thanks for watching
Did your intermediate come out of the bracelet easily? I'm working on a 2011 trying to replace my intermediate shaft but it's stuck in the bracket. I unbolted the bracket and it gets in the way trying to pull it out.
@@oaden0621 the intermediate shaft needed some persuasion, it wasn't that bad Let me know if you have any other questions Thanks for watching
@Slicpartna thanks for responding. I'm going to try using a slide hammer to get it out. It doesn't want to come out of the bracelet. I even unbolted the bracket to remove the whole thing but there's not enough clearance.
The slide hammer didn't work for me. T my intermediate staft might be seized in the bracket. Could you tell me how you got yours out of bracket?? Any tips would be greatly appreciate.
@@oaden0621 I removed everything from the car as a unit and then used a heavy rubber mallet to beat the shaft out. It will come out, just stick with it. Let me know if you have any other questions Thanks
@@oaden0621 hey hey out of curiosity Are you trying to replace the cv axle? Did you ever get the CV axle separated from the intermediate shaft?
Great video, bout to replace my fan, resistor block, and even the control panel switch assembly in the dash on a 1997 chevy 2500. Ended up with ebay purchased items, ...I am sure they will do fine. I think I will find a spray bottle and use a soapy water like dawn dish detergent cause I'm nowhere near a home depot store and I guess I could call around to various parts stores to see if they have evap cleaner. Using the hose, wow, I want to do that, where originally all I wanted to do was use a vacuum cleaner, maybe an old toothbrush, but eh, I want this fix to last a long time,....a very long time. I live on the Oregon Coast, not much dusty air, nor pine needles near my driveway, but I haven't seen what's "inside" yet.
Thanks my 👴🏿!
Thank you sir!
Did u have any dash lights (ABS)
@@V22D yes I had a ABS light I removed the bulb Let me know if you have any other questions Thanks for watching
Thank you so much!
@@austinhealey5158 let me know if you have any questions Thanks for watching
Man I just replaced my blower motor why did I not think of this 😭
@@dumbdumb572 yea yea
Did you set up an additional relay that’s hooked up to the solenoids or did you add it to the relays that are for the main setup? I have an autoloc setup, too, and it has the wiring to the controller hooked up at 86. I think blue white for the driver side and green white for passenger side on the other relay. Mine is just two doors.
@@BillyFontaineSYB I have additional relays Let me know if you have any other questions Thanks for watching
Were those the original gaskets or were they replaced before?
@@23steph13 those were original gaskets Let me know if you have any questions Thanks for watching
Pretty good video; very helpful hopefully I can get the ac blower to come on without jumping it off to come on… Do you have any videos with ground problems ?
@@Obs_sergeallday Unfortunately I dont have any content on ground issues What problem do you have with the blower motor?
@@Slicpartna thanks I can’t get the windshield wiper to come on, radio and the ac is out.. I would have to hit a bump for them to pop on… good Mechanic are in short supply in New Orleans 🤦🏽♀️
@@Obs_sergealldayoh wow that isnt good!! You might have checked this already but you can check the ground from the battery to the engine block and to the body Make sure the bolts are tight
@@Slicpartna Will be checking it in the AM. Thanks
excellent video but have a question. i have a 09 2500hd quad cab 4x4. to my understanding the electrical connector that plugs into my abs module (looks like yours) also sends signals to turn off and on the fuel pump. did you run into this problem when removing the abs module and if so what did you do to fix it? thanks one more thing i dont have a brake power booster i have hydraboost.
I didn't have any issues with the fuel pump. Everything should should work the same with the hydraboost Let me know if you have any other questions Thanks for watching
Just came across a 99 suburban. Figured why not? Your videos are helping me find direction on this build bro thank you 🙏🏽
Let me know if you have any questions Thanks for watching
Thank you very much! I have cleaned mine out with a garden hose before but I am definitely going to use the foam spray asap I need all the air I can get mine not cutting it.
Let me know if you have any questions Thanks for watching
Sir... this is by far the best video
Thanks for the compliment Let me know if you have any questions Thanks for watching
An absolute legend. Thank you. 🙏
Let me know if you have any questions Thanks for watching
If the brakes are hard when the truck is not running and then spongy when the truck is running it's usually the hydraulic valves in the ABS.
I believe I have that issue too thank you.
Let me know if you have any questions Thanks for watching
Nice work bro. I had this video on my watch later list. I have my Elco completely primed with high build. I just need to get down on some blocking. Your video got me inspired to start working again. Thank you bro. Stay up✊
I suggest breaking the block sanding down into micro tasks, just do a little at a time You will eventually get it completed and ready for the next step Thanks for watching
Good job bro. I also prefer wetsanding my guide coat with 400 grit. I find dry sanding too scratchy and I burn through much more easily.
going forward i will only wet sand, when i dry sanded the hood, I burned through. i re-sprayed primer on the hood, wet sanded, this time it was a different outcome I'm sold on wet sanding thanks for watching
How many remote vehicle buttons can be wired up?
You can have as many remote buttons as you want Let me know if you have any other questions Thanks for watching
I like wet sanding as well. It makes the sand paper last longer. I have a black GMC Yukon and want to paint it at home. I agree with your idea of painting a section at a time. These are big SUV's and without a paint booth I think it's smart to break it down.
I favor wet sanding over dry sanding. I can deal with the water more than the dust. Thanks for watching
Not trying to be rude here but 21 first century man no one wet sands anyone I dry sand every thing
Hey doc no offense taken, Like I said dry sanding create too much dust for me. Thanks for watching
DC's chop shop! 😂😂😂
Where'd you go for your drilled/slotted rotors
I got the rotors from summit racing Let me know if you have any other questions Thanks for watching
What about that annoying ABS light how do you get that to come off after the final assembly??
I removed the bulb for the abs in the instrument cluster Let me know if you have any other questions
I appreciate you for making this detailed vid. Just got my 96 burb blower motor out and I’m stunned how clogged my cooling fins are. When you are rinsing with water is there any danger of the crud getting stuck in the other side of those aluminum fins ? Or does it drain on the other side too ? Going to depot tomorrow to get the foaming cleaner. Thank you , just subbed Also what brand blower did you buy ?
Use a tooth brush to dislodge the crud, remove the debris as best as you can. I ordered the blower motor from rockauto I cant recall the brand. Let me know if you have any other questions Thanks for watching
@@Slicpartnamany thanks , I found it on rockauto, it’s a four seasons. Appears some Autozone’s carry it too. Blessings
Howdy there, great video What do u think would be my issue would be if I smell ac refrigeration on inside of my 97 k1500, ac freon doesn't stay in overnite even
@@danieldriscol4484 If you smell refrigerant inside the passenger area, then you might have something going on with the evaporator. I would suggest doing a leak search. You can add dye to the system or use refrigerant that has dye in it. To confirm if is the evaporator you will see the dye leak out of the condensate drain tube with the condensation. You will need a light that will pick up the UV Dye Do this at night, you will see the dye better Good luck Thanks for watching
Ive always just Poured ground pepper and it even seals larger cracks
Interesting idea, I will have to keep that in mind Thanks for watching
Wish I had more friends like you. Can’t wait to see how this turns out
I'm anxious to see the this finished I will be starting a new project LS swapping an Ole skool caddy
@@Slicpartna can’t wait to see how it goes 👌
Crap i swapped my blower motor one screw suuuucked but i left it out haha. Pissed i missed the opportunity to do this cleaning when it was right There!! Its on my list now the low vents blow hard air but top vents are weak...hasnt been cleaned in 27 years i guarantee
Wow 27 years! I'm sure there is all kinds of debris in there blocking the air flow. Let me know if you have any questions Thanks for watching
@Slicpartna just did my evaporator n heater core without dash removal have 3 hours of footage to edit for a video
Loved the 383 build that I need to rewatch but now paint nice loving your content. Stay Real!! Thanks again
Thanks for the compliment and thanks for watching Let me know if you have any questions about this build
That's one smooth looking Suburban, I've never seen anyone shave the door handles and tail lights. Maybe do the jams ahead of time. Having it all closed when you do the outside should make it easier to get the same finish on the doors and fenders.
Thanks for the compliment I plan to paint the door jambs and the roof at that same time. Stay tuned in, Thanks for watching.
Nice bro keep pushing
Thanks for the encouragement Thanks for watching
What is that tapping noise when you have your A/C on ? My truck is making the same noise just trying to figure out what it is .
If I remember correctly, I think that sound was coming from the belt tensioner Let me know if you have any other questions
Well done Sir
Thanks for watching
What size crank he’s using???
It is 4" stroke crankshaft Let me know if you have any other questions Thanks for watching
Question do you have dual batteries and if so how did you hook them up ?
Negative, I dont have dual batteries
Okay thank you so much for replying.
Thanks for this video sr !!!! This video help me a lot in my truck …gracias amigo 💪🏻💪🏻💪🏻💪🏻🔥🔥🔥👍‼️
Let me know if you have any questions Thanks for watching
Added a dye to my coolant to find my leak but this would be quicker method for-sure
yep yep, it doesn't take much time for the leak to reveal itself let me know if you have any future questions thanks for watching
Nice! I have the same issue. 2004, 5.3, drip drip drip! I've been smelling coolant for a while now. The leak finally got heavy enough for it to drip past the skid plate and onto the driveway. Fun!
Let me know if you have any questions Thanks for watching
@@Slicpartna I ended up replacing the water pump today. Pretty easy really, except for the coolant mess. Whoever it was at GM that made the decision to block off the radiator petcock is a grade-A idiot, lol. I ended up putting two and a half gallons of coolant into it when I was done, and after bringing it up to operating temperature, it doesn't show any signs of leaking! Fingers crossed.
@@SomeGuyInSandy hopefully that solved the problem. Let me know if you have any future questions
What oil pump did you use ?
I used the melling high-volume oil pump Let me know if you have any questions Thanks for watching
Hooooooraaleeee.. VATO🤟🫡. I HAVE GT YUKON AND I ALWAYS WANTED TO PUT DISCK BREAK..HORA LE VATO COOL VIDEO 😊
thanks for watching let me know if you have any questions
Bruh hit me back i just need ah truck engine recipe
Great video Thanks for sharing
Thanks for watching Let me know if you have any questions