Відео

Slr

Thank you master, may God protect you.

All those Chinese breakouts are the same. I bought the big GODIAG and that's completely rubbish , to the point of being dangerous. It showed up a k line fault when the launch plugged into it. On a vehicle that never had a k line fault. And when cleared and re scanned with just the launch.....no fault. That's as far as I was willing to test it. It went straight back.

It has Daewoo lacetti & Holden Cruze & Chevrolet Cruze 2010-2016 1.8 eco tec engine's.. lol

I have the same problem with my astra h z14 xep. The ecu wont communicate with other modules. No crank and fuel guage goes to empty after a few seconds. Help

To have full access to the chinese OBD BoB you need it connected to the scan tool which enables communication with the ECM. As you are running the PICO through the chinese BoB and getting additional LED's flashing, that tells me the pins/wiring on the chinese BoB are working OK. What year vehicle were you testing? was it can bus or old K line?

Dear the lights still red in my device.. And not work

Very well explained and provided your point very clearly 👏 very good

Where's the best place to buy good coil packs from ?

Hi, do you have the part number of the ECU? I would be really graceful.

I really understand my car now but if possible can anyone help me I have a 1.6 Opel Astra H the spanner light flashing and no crack when I want to start the car but I can Crack it from the bottom but not from the ignition I've tried everything but with no luck any advice out there

I see how you sorted the problem but when you switch the car ignition on the spanner light is not flashing like mine and ones the spanner light flashes my car doesn't want o crank or start

Just had the very same issue on a Zafira B (Z16XE1) due to a misfire I fitted a Delphi coil pack from Euro Car Parts thinking I was fitting an OE part but a few days later the car failed to start (No cranking as if it was immobilised) - The CanBus was corrupt whilst the multi plug was connected to the ECU. I bought a reset ECU and programmed it in to the car. But, fearful that this ECU was going to be destined to the same fate, I started to ask questions and was kindly forwarded your video which has helped clarify the situation. Now the task begins of trying to get Euro to admit that they have sold me a substandard Delphi part.

superb information sir

cheap shit none gen coil packs for ya

The tech 2 is an emulator which i download from gm login. There are some available from ebay and if you can get version 188 then thats the final version. The mdi 2 was purchased from gm service solutions but the cost is probably too much if your using it for tech 2 only. I also use GDS which is the software for newer vx range 09-2019. Unless your using daily its probably just too expensive, a quality scan tool like autel would be a cheaper alternative. Regards Joe

Great video very well explained.i would like to know cost of tech 2 and were you bought it at the moment I am using op com.thanks

So how has it been ? Do you like the scope ? Which model did you get ?

Great video. Would you be able to tell me what make your coil pack testing leads are please? They look superb quality compared to what I can find on Ebay etc. Thanks

I was thinking about buying one of these cheap break out boxes from ebay but not anymore. Its cheap for a reason.

Just a quick question What does it usually cost to reprogram a reset ecu for a vauxhall astra h sxi 1.6 I dont want to be getting ripped off My insurance company fitted a black box to my car and since then my car wont start im getting all the lights but won't turnover I had a diagnostic test done and there is no communication with ecu And a few other faults U2116 U2139 U2141 B1001 U1375 1 week previous I had a lot done and had a diagnostic test done and there was no faults

From where you get a replacement ECU?

yes this labscope looks good and the softwear to

hi Joe I'm struggling with a corsa d 1.3cdti dtr engine ,2011 keeps coming up with spanner car light ,check codes and get undeboost on turbo any ideas your help much appreciated

I've got the same problem on my 2005 astra 1.6 no start just relays click starter is fine as tested it also relays OK the is a f in the desplay screen wear the fule range is any ideas on what to check would be great

Hello pal great video having issues with my astra 1.6 sxi on an 09 plate, started intermittently crank no start have to turn ignition off n back on with a bit revs starts second time, its really strange because a lot of the time it just starts without problem no hesitation nothing first turn then can turn it off for a few seconds try again and crank no start, replaced battery in the key just had a service (by me) lol had few people say it could be an immobiliser issue, only fault code ive got is for thermostat (59761) which seems to be working fine. Had 4 diff readers on it 2 diff mechanics look at it and no ones got a clue. Any help would be appreciated mate.

SUPERB video. Keep them coming. :-)

Wow, a real automotive oscilloscope

Old Gerry in the background👌🏼

Have the same problem with my Astra mk 5 intermittent start no crank and sometimes cranks Codes are P0201 open circuit on injector P0201 same P0203 same P0203 same P0204 same Had ECU tested came bk fine but replace with a second ECU and official coil pack because was told coil pack was a 3rd party one and can course problem with ECU .... So after all the I've still got the same problem ...thing it once the car starts it runs perfectly fine 🤔. Any idea would be very helpful Cheers

Nice thanks great had the same problem car not cranking and lots of fault codes getting a nice oem coil pack fitted.

V4 CAN YOU ADVISE ABOUT POSSIBLE AIR IN BRAKE /CLUTCH FLUID PROBS? Recently had brake pipes done on front and the idiots didnt full brake fluid back up. I think i have air in system and its hard to get into gear. I do have another clutch,frame and a cylinder just in case.

Ita Vauxhall of course it needs a coil pacl lol. Ive had 2 Vauxhalls and both needed coil packs. My current car is Z20LET bought a coil pack last month for it.

Hi Joe...long while since I seen Ya post.

Looks a bad one Joe

Mon the cinnamon

Was thinking about a picoscope 4425,but like the look of these tiepies. Thing is when you go to tiepie site you find the handyscope hs6 but, there's so many different spec levels on the hs6! , can you recommend which hs6 will be ok for all car work and won't run out of puff for anything?(i take it yours will be the top one?) Thanks!

I grabbed the Cando Bob it’s a great box once of the best

good vid

Good info. Thanks for sharing 👍

I CAN'T TELL YOU ENOUGH HOW MUCH I LIKE THAT PANASONIC TOUGH PAD SETUP . ALSO IF SOMETHING DOES NOT MAKE SENSE I BACK OUT OF ENHANCE DATA AND CHECK MY GENERIC JUST TO BE SURE THANK YOU SIR . I WOULD LOVE TO SEE AN IN DEPTH LOOK AT YOUR GM SET UP IF IT'S NOT TO MUCH TO ASK AND MANY THANKS !

Nice one, thanks.

Thanx Joe very good point indeed.

Great piece of information there, short and clear.

Cheers Joe a good reminder, many thanks, sandy

Hi I have a 1.8 z18xer vvt petrol vectra c.I have a slight hunting idle speed. Was going to clean my throttle body to see if it helps. Will I need to do an idle relearn after the cleaning. If so would i be better disconnecting the battery to see if it will relearn it After cleaning? Thanks

THAT HAS GOT TO BE THE BEST LOOKING GM MDI AND TABLET SETUP I HAVE EVER SEEN WOULD LOVE TO SEE MORE VIDEOS WITH THAT SETUP PLEASE .

GREAT SCOPE MY FRIEND , COULD I HAVE THE PART NUMBER FOR THE SCOPE LEADS AND THANKS SO MUCH I LOOKED ON THE RS SITE BUT DID NOT FIND THEM !

cool

another great vid many thanks