Відео

Aren’t those worth money? Other than the obvious face value 😜

Are you suggesting they should upgrade to this mirror?

I’m guessing they weren’t supposed to end up inside the wall though?

Haha it was definitely a strange find!

So weird… I did notice one time on an old house reno that there were some razors in the wall… but nothing like this one… there has to be a few hundred in there

@@A.G.T.A From what I was told there is supposed to be a receptacle back there to accept the used razors.a lot of the time pople never emptied them or touched them and many people just put an opening in the wall and forgot about the collection portion 😂 good reason to wear gloves!

@mrgrassninja I found a couple of needles too, so the razors are a welcome surprise in comparison 😜

Very welcome 👍 I hope it helped and you’re enjoying your new privacy wall!

Ya that one got a pretty good overhaul

Ya I’m on the fence for selling it or keeping it… and I’m generally a fan of a nice piece of wooden furniture with a good dark stain… but I’m still deciding on that too

No matter what you decide it’s a win either way.

Happy to hear! 👍

😂😂 if he wasn’t holding the camera I might have been in trouble

It’s a mystery 😜🙏

This is used on a tub (so there is no pan for it) if you are using an acrylic shower surround kit, some will have a base that is made by the same manufacturer, but you can use another base. You just need to make sure you seal the bottom of the wall where it meets the base.

@@A.G.T.A Awesome, thank you!!

Ya Tyler cut the video off a bit short… it was an interesting escape 😜

You and me both! 😜

Unfortunately I don’t have a copy of the plans as I did this off the cuff without a plan… I can tell you that it’s basically making a straight and level ledge on a full plywood wall and then attaching your worktop (in this case I used 3/4” plywood) using sturdy hinges… then at desired intervals (depending on how strong you need the worktop) have supports attached with hinges to the wall (make sure that the thickness of your ledge that you attached the worktop to is slightly thicker than the thickness of your supports so when you push them flat to the wall, the worktop hinges can clear them and lay flat against the wall. Having levelling legs on the bottom of the supports will account for a garage floor that isn’t level. Again I’m sorry I don’t have plans for this… I hope this helps… if you have any other specific questions, I’ll be happy to answer them for you

I told him if he keeps torching brushes he’s buying his own… hopefully now that I told him why he’s messing them up, he’ll fix his mistake

This is his 3rd one I think 😜

Some solvents have chemical reactions with the rag that causes spontaneous combustion… when the rag is crumpled up and allowed to gather heat… in this case it was in a cup holder so it was a perfect condition for the reaction… lucky I caught it in time

Thank you very much 🙏❤️🔥

Thank you very much! You’re right… it’s hard to keep the truck clean when you’re as busy as we are flipping from job to job 👍

Thank you very much 🙏❤️

You’re so 🔥❤️

@@A.G.T.ATake your shirt off. 👅❤️😁🔥

Backatcha 🔥

😂😂

We’re fair with our pricing and are good at getting jobs done in good time, so we get a good amount of this type of work… but of a curse sometimes 😜 thanks Pete! Have a good night as well buddy

Thank you 🙏 ❤️

And regarding the “other fluid” comment…. Loved it 👍🤣

😂😂 we went to take care of the ‘sinking’ floor… but it turns out it was stinking as well… I’ve been to Texas once (just a quick drive through on my way to Vegas) and it was great… you Texans are class all the way! Were either wet with rain lately or sweat from the heat 😜🤷‍♂️

@@A.G.T.A next time you are close by, let me know. I’ll take you guys for some good Mexican food, margaritas, and a few shots of tequila. 👍

@eganpete deal 👍

6” 1/2” black carriage bolts… but we put some extra reinforcement under the deck boards since we knew what we were going to do prior to the whole build

Thank you 🙏 ❤️

You clearly didn’t watch the whole video, or you’re confused on what a ‘tip’ is… just watch it 5000 more times and tell all your friends too 😜👍

We have an endorsement contract with Old Spice that requires us to both work hard and be sweaty all the time 😜

🙏🙏🙏

Thank you 🙏 🙂

😂😂 thanks Pete 👍👍

❤️❤️🙏🙏

😂😂 there will likely be more of these days since we’re lazy in the summer

😂😂👍

😂😂👍👍 we’ll add it to our routine a little

😉

Thanks random person who I’m happy found us while scrolling 😜🙏

Thanks buddy 🙏 will do

Thanks Pete… we’ve been so busy lately, but I’m going to try to make a couple of dumb videos and a couple of serious ones to help the channel growth… not everyone is as cool as you to follow our vlog posts so faithfully 🙏

@@A.G.T.A I like em all. 👍

Hi 👋

​@@A.G.T.Ahi

There’s a thermostat on the unit (small dial) otherwise if that’s pooched, you could just find the breaker and turn it off at the panel

Thank you very much 🙏

Then I did a good job creating the ‘buzz’ 😜😜 thanks buddy 🙏👍

@@A.G.T.A Tyler gets an extra “click” 👍. You guys enjoy your weekend. 😊👍

@eganpete don’t encourage him 😜 have a great weekend as well buddy!

Thank you very much 🙏

Fancy 👍

Lately that’s for sure! 🙏

I don’t really have any of the assembly, but I may have some vlogs that show it a bit more… it’s a fairly simple construction, you just have to build the cabinet to suit whatever you designed it for… in this case, I have the big drawer on the top for pool supplies and the 2 cabinets on the bottom are for a small fridge and ice maker… the waterfall pump is in the middle of the unit between the bottom cabinets. Sheathed the whole thing and used modified thinset to attach the stone to it and capped it with pavers. If you have any questions on assembling it I’ll help whatever way I can

Oh man thanks so much i appreciate it!! How do you have the intake for the pump ran to the water?

@lindseyloo6619 I actually cut an additional hole in the pool wall before I installed it and ran a pvc pipe up that side before I poured the pad in preparation for the future waterfall… so I was thinking ahead… if you don’t have that setup, depending on your landscape (poured pad, pavers, deck) you’d have to find a way to run the piping into the side of the pool, or go the not so clean approach of having a flex hose run into the pool somewhere

Awesome thanks so much!!

I always have to keep an eye on him around anything copper 😜

We’re just poking fun… you’d probably make fun or laugh at a hairy gross dude in a Speedo… and you’d be right to since he shouldn’t be wearing that… just like fat people who can’t manipulate their body easily in regular situations shouldn’t put themselves in large pits full of foam balls… just sayin 🤷‍♂️😜

And thanks 🙏

@@A.G.T.A most people who are abusive will downplay the abuse they are inflicting on others and then downplay their victims response to it. And thanks. 🔥

@@Julie86Macit’s not that deep

@FlappybirdPlayzz good to see some people don’t take things so seriously 👍 and props on the double meaning there 😜