Відео

Great video quality.

I wasn't even thinking about this mode, I was about to buy the Spin. These are cheaper and love how they fold in. Thanks!

Fabulous information! Thank you so much!

Hi there! I've acquired a Kenmore sewing machine secondhand - same mechanics as this machine, roughly. It was in a little bit of rough shape from the previous owner, and it wasn't feeding material at all, this adjustment helped me get it in sewing shape! I've been desperate to fix up some clothing items and apart from a tune-up, my machine is ready to go! Thanks for the instruction!

Oh my goodness thanks sooooo much!

Your innate mechanical understanding is amazing! Bravo!

Great thanks!

I have a Kenmore sewing machine suddenly machine is stop not moving like jam I put oil in side nothing happen do u have a ph in Canada toronto plz send me

How did you take the cover off?

My metal foot controller doesn’t have a screw. The wire goes into the pedal through a rubber grommet.

Excellent info, thanks so much. I have a 148.15600 and was surprised to find that its feed dog adjustments are identical to the ones on your 158.1941 . These are wonderful old machines!

Thank you - so helpful!!

Thank you so much for sharing your knowledge and expertise. Also, thanks for your clear and concise explanation; so helpful!

Thank you for the presentation on behalf of me and those who, although forgotten here, did not thank you. Thank you

Thank you so very much!. I bought a Sears Kenmore 158.17030 on ebay recently. I believe that during shipping it suffered a rough trip. The bobbin winder and spool holder arrived broken, as well as the hard plastic case. The machine is lovely and shows beautifully. I was able to get a used generic 158 model Kenmore bobbin winder replacement on ebay. The screw you described, I found at a local hardware store. I did not find a nylon washer but found a 1/4 inch metal spacer. I made the repair today. It works! I was also able to find a replacement spool holder. The machine is now working great! I could not have made the repair without your video! Thank you.

So well and clearly explained. Thank you.

Is it necessary to thread that bottom bobbin for the machine to thread or can you just thread the top and it still work?

I bought a used Kenmore 385.15343600 and the needles keep breaking hitting the base. Does anyone know what the problem could be and how do you open the door on the right of the machine….mine won’t open with just a pull. Is there a trick to it…I don’t see any buttons to push to open it.

Hi, I just bought a kenmore 158.17501 and the feed dogs won't go backwards to help feed the fabric. The 1750 machine looks a little different then the one in the video. I loosened a screw that looked like similar placement but it didnt work. Do you have any suggestions? Thank you

I've got a Kenmore model 158.19312 and when I pull the clutch out to wind up a bobbin, the needle bar continues to travel. Do I have a stuck clutch? How do I fix this?

I found your channel while surfing sewing machine issues. Imagine my surprise when I realize that you own a Brompton bike!! We have two Bromptons and absolutely love them.

The knob to lower/raise feed dogs on a 148.12181 does not perform its function. Stuck in Raise. Would someone ever purposely tighten some screw to prevent dogs from lowering?

How could I get the parts of Sewing machines 🖐🏽🖐🏽🖐🏽🖐🏽🖐🏽🖐🏽

Can the dogs on this machine be dropped?

What a great video! Thank you!

How do you lower feed dogs to make buttonhole

Great Video just what I was looking for, I just bought a 158.16900 it looks brand new, but I'm greasing it up to make it purr like new.

So I keep getting 'sawtoothed' stitches on most of my 158 Kenmores. I've reduced it to some extent by playing with tensions, but I'm fairly convinced that the real issue is uneven feed dog lift and perhaps some lateral movement. How do I adjust out the lateral, the 'sway?'

can you use super lube as grease ? or do you only recommend tri flow

Morning! I have this machine and am trying to use the buttonhole attachment. Having trouble with it as the fabric does not move through...stays in one place creating a small ball of thread. I did use it years ago and recall the attachment moving with the stitching....is that what it is supposed to do? And if so, why is it not this time? Your video is helpful.

This is a great fix! What replacement bobbin winder did you use? Do you have a part number or description to look for when purchasing?

Hola como utilizar los accesorios de esta maquina para bordar las letra porfavor

I just found a 158.18032 for $30 incl. cabinet. So happy. Did some sewing which went fine till I ran out of bobbin thread. It would not wind the bobbin. Have cleaned and oiled all moving parts incl. clutch release button mechanism. Have a "top bobbin winder" and I think (hope) that all I need is a new tire. How do I know if bobbin winder is broken? Does it actually break in pieces? Thank you for your time

Me gustaría que fuera en Español

I just got this model second hand, and I was thinking that the feed dog might need adjusting, sometimes it has difficulty moving the fabric through. Thank you for this video

Thank you!!!!!! Just bought this. Perfect timing!

Tengo esta misma pero no la sé enhebrar

Hi, I am looking for a mirror for my brompton. I was wondering if you can still roll your folded Brompton with these mirrors on them ? As the demo (nice job done) is given in the grass, I can't see if it would be possible or if the end of the mirrors would be scraping over the ground ? I intend to roll my folded brompton rather then carrying it in shops, at work, at home etc... Thanks

Oh wow. Easy to put on!

Hola tengo una kenmor modelo 1278191 no se arreglar

Thank you for your videos. They are simple, straightfowards, and very informative (exactly what we need when we are trying to figure-out how to take care of and upgrade our Brompton). :)

Thanks for the video it helped me decide to buy these. Looking forward to receiving them

I have seen copper end caps but why on earth doesnt Brooks promote them?

Hi! During cycling. Will the mirror get out of vision alignment due to vibration? Especially on bumpy roads. Thanks.

👌

🙏🏻thanks

Great stuff! I have a Kenmore 158-1040 with a similarly broken bobbin winder. I've been using a different model Kenmore to wind a bobbin for it when necessary. I think this might be the one mistake Kenmore made in the design of many fabulous vintage machines. The metal is rather soft and breaks easily - strange. Anyway, you've given me the incentive to find a find a new winding assembly - if not an exact match - one that can be adapted as you did. Thank you!

it baffles me that machines that are soooo similar can be sooooo different

thanks just ordered some.

You’re going to have fun. Nice