Відео

In this video I close out the elevator bottoms for good. I had closed them before but wasn't happy so I cut them off and did it again. Stay to the end to see the elevator start working with the Kevlar live skin hinge!

NASA's Armstrong Flight Research Center at historic Edwards Air Force Base has a long history of using model aircraft for flight research. This video tells the story of how it was conceived, where it has been and where it is going. I'm proud of my time there and contributions made towards the unknown.

Ryan Jensen conducts the maiden flight of his Aeroic Composites Alpenbrise A157 at Grass, Mountain California. This Alpine style slope sailplane boasts a 4M (157") wing span and is all molded from Carbon Fiber. It is outfitted with Tomas Liu Studio servos and LDS frames, all up weight is 9 lbs. More info here: www.aeroiccomposites.com/alpenbrise-a157-4m Get it here: alofthobbies.com/products/al...

Steve Clasen puts the E Corsa through it's paces over the Los Banos reservoir. This is a moderate power set up and the high G turns show off the strength and stiffness of this all carbon airframe. Be sure to watch to the end where he switches to a self made speed prop and rips it like a pylon racer. Hacker A30 12XL outrunner ZTW Gecko 65A ESC 4s 2200 lipo 13.5" x 7" folding prop Aircraft info: ...

Daryl Dunkelberger flying his E-Sessanta 60" flying over the beautiful Los Banos Reservoir in California. No music in this one so you can hear how quiet and efficient this set up is. This is a light weight set-up that lets it fly like well on the slope and then open the throttle to have some fun. The airframe is very stiff and would easily handle quite a bit more power. Hyperion 3025-10 (775Kv)...

This is a proof of concept test using an unpowered glider carrying a rocket. The tow plane and mated glider/rocket combo act as a first stage while climbing to altitude. Once high enough the glider performs a Gamma maneuver to extract energy from the tow plane and place the rocket on a favorable trajectory for launch.

Aeroic Alpenbrise 4M sailplane doing loops in light lift at Sunset State Beach near Watsonville, Ca. AUW 9 lbs. GDW servos, Tomas Liu IDS, Spektrum guidance.

The landing area at Sunset State Beach California is a bit tight for a big 4M ship, but the large flaps and impeccable manners make it easy. Get yours at www.AloftHobbies.com

Maiden flight of the Aeroic Composites Toccata 2M sailplane at Sunset State Beach near Watsonville, CA. 60 oz. (dry) all up weight.Tomas Liu and FrSky servos, Tomas Liu hardware, Spektrum guidance. 8-10 mph and smooth ocean lift. Order yours at www.AloftHobbies.com

I prep the molds and build the right upper carbon and foam sandwich wing skin.

This is the maiden flight of the Aeroic Composites Alpenbrise 4-meter sailplane. This all-composite offering is designed to be a large alpine style aerobatic machine. Unballasted weight is 143 oz. (4.05 Kg). Built in provisions for wing and fuselage additional weight. Equipped with: GDW Servos Tom Liu Studio LDS frames Spektrum iX20 Get your Alpenbrise at www.AloftHobbies.com

I start prepping the upper wing molds and make a mock wing center section to begin fitting to the fuselage.

Madstab with pull-pull cams concept

Seagull Bombing Run

Mini Wanderer by Alien Technologies

Aeroic Composites Spada 3M - Maiden Flight

Old Danny Ep10 - Fixing the clutch

Ready for Reno! Ep 11

Impulse Ep 10 Seaming, priming & Fitting the canopy

Homebuilt Airplane Carbon Fiber Cowl marking and Trimming

Impulse Ep 9 Bonding the Canopy

Impulse Ep 8 Finishing the Tail

Impulse EP 7 Building the tail Pt 1

Impulse Ep 6 Fuselage molding complete!

Impulse Ep 5 cranking out parts!

Impulse F-1 - infusing the lower cowl

Impulse Ep 4 Infusing Fuselage Skins

Baby Boomerang

Vintage Jalapeno Slope Racing Glider - Maiden Flight