![IDES Studio](/img/default-banner.jpg)
- 67
- 172 732
IDES Studio
Australia
Приєднався 30 лис 2020
IDES is a Digital Fashion Studio providing 3D assets and tutorials for use in CLO 3D. Founded by a former CLO employee and technical designer, IDES incorporates technical pattern making into 3D fashion.
I teach 3D garment construction that is realistic for fit and visual and make traditional pattern making techniques easy to execute in CLO.
**Stay tuned for IDES Courses launching in early 2024 that will help those of you who may be starting from scratch in 3D.
To see our full range of products visit: ides.studio
I teach 3D garment construction that is realistic for fit and visual and make traditional pattern making techniques easy to execute in CLO.
**Stay tuned for IDES Courses launching in early 2024 that will help those of you who may be starting from scratch in 3D.
To see our full range of products visit: ides.studio
CLO Tools Explained, Under 1 Min- Check Sewing Length
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes.
This one explains Check Sewing Length, a tool used to quickly check that all sewing matches in length within a specified tolerance.
This one explains Check Sewing Length, a tool used to quickly check that all sewing matches in length within a specified tolerance.
Переглядів: 472
Відео
CLO Tools Explained, Under 2 Mins- M to N Free Sewing
Переглядів 2959 місяців тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains M::N Free Sewing, a tool used to sew multiple patterns to multiple patterns, regardless of segment points. A common exmample is a 2-piece sleeve into an armhole. However, this tool is still uncommon, as it will not respect ...
CLO Tools Explained, Under 2 Mins- Segment Sewing
Переглядів 1759 місяців тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Segment Sewing, Hotkey N, a tool used to sew together single segments.
CLO Tools Explained, Under 2 Mins- M to N Segment Sewing
Переглядів 2339 місяців тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains M::N Segment Sewing, a tool used to sew multiple segments to multiple segments of unmatching individual lengths. This tool isn't commonly used. M::N Free Sewing is more common, explained here: ua-cam.com/video/QrCY3irlwpg/v...
CLO Tools Explained, Under 2 Mins- Edit Sewing
Переглядів 1679 місяців тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Edit Sewing, Hotkey B, a tool used to edit or delete existing sewing relationships.
CLO Tools Explained, In 2 Mins- Free Sewing
Переглядів 1759 місяців тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Free Sewing, Hotkey M, a tool used to garments together, regardless of segment point placement. It is the most commonly used, useful sewing tool.
How To Use Adobe Substance .SBSAR Files Effectively in CLO 3D
Переглядів 3,6 тис.Рік тому
This is a quick rundown of what you need to know to make Adobe Substance textures look photorealistic when rendering in CLO3D. Don't miss the 2 most important points from 1m51s. 00:00:08 Understanding Texture vs. Physical Drape i.e. CLO .ZFAB files vs. Adobe .SBSAR files 00:01:51 2 tips when using SBSAR files in CLO Must Watch 00:02:54 Customisation Options (from top to bottom) Check out the ID...
CLO 3D Tools Explained, Under 1 Min- Seam Taping
Переглядів 1,2 тис.Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Seam Taping, the tool used to apply the 3D equivalent of seam tape or stay tape to your garment seams.
CLO 3D Tools Explained, Under 2 Mins- Trace
Переглядів 850Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Trace, Hotkey I. This tool is primarily used for activating Baselines or tracing patterns from internal markings and pattern edges. This is often used to create things like facing and lining patterns. It can also be used to...
CLO 3D Tools Explained, Under 2 Mins- Seam Allowance
Переглядів 1,6 тис.Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Seam Allowance, the tool used to apply seam allowance to your pattern for exporting or printing.
CLO 3D Tools Explained, Under 1 Min- Pattern Annotation and Symbol
Переглядів 1 тис.Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Pattern Annotation, Edit Annotation and Pattern Symbol. These tools are used to add annotations and symbols to your patterns, as is custom with traditional pattern making. These annotations can be exported with your pattern...
CLO 3D Tools Explained, Under 2 Mins- Walk Pattern
Переглядів 715Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Walk Pattern, a tool used for walking patterns out, as is done in traditional pattern making.
CLO 3D Tools Explained, Under 2 Mins- Polygon
Переглядів 623Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Polygon, Hotkey H. This tool is used to create free-form pattern pieces with any number of curved or straight sides.
CLO 3D Tools Explained, Under 2 Mins- Spiral
Переглядів 433Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Spiral, the tool used to create spiral ruffle patterns.
CLO 3D Tools Explained, Under 2 Mins- Notch
Переглядів 522Рік тому
This series of videos explain the gist of what each tool in the CLO 3D toolbar is used for and how it works. All videos in this series are under 2 minutes. This one explains Notch, the tool for adding and removing notches from your patterns.
CLO 3D Tools Explained, Under 1 Min- Rectangle
Переглядів 457Рік тому
CLO 3D Tools Explained, Under 1 Min- Rectangle
CLO 3D Tools Explained, Under 1 Min- Elipse
Переглядів 237Рік тому
CLO 3D Tools Explained, Under 1 Min- Elipse
How To Digitise Paper Sewing Patterns With A Phone, Accurately Using Photoshop and CLO 3D
Переглядів 7 тис.Рік тому
How To Digitise Paper Sewing Patterns With A Phone, Accurately Using Photoshop and CLO 3D
How To Draft A Trouser Block, Pant Pattern From Measurements In CLO 3D
Переглядів 9 тис.Рік тому
How To Draft A Trouser Block, Pant Pattern From Measurements In CLO 3D
How To Make A Front Twist Dress Pattern I Create Twisted Garments In CLO 3D
Переглядів 10 тис.Рік тому
How To Make A Front Twist Dress Pattern I Create Twisted Garments In CLO 3D
How To Print PDF Patterns At Home, Export PDF from CLO 3D- Tile Print
Переглядів 15 тис.Рік тому
How To Print PDF Patterns At Home, Export PDF from CLO 3D- Tile Print
CLO 3D Tools Explained, Under 2 Mins- Edit Curve Point
Переглядів 1,4 тис.Рік тому
CLO 3D Tools Explained, Under 2 Mins- Edit Curve Point
CLO 3D Tools Explained, In 1 Min- Smooth Curve
Переглядів 1,1 тис.Рік тому
CLO 3D Tools Explained, In 1 Min- Smooth Curve
CLO 3D Tools Explained, Under 1 Min- Transform Point/Segment
Переглядів 546Рік тому
CLO 3D Tools Explained, Under 1 Min- Transform Point/Segment
CLO 3D Tools Explained, Under 2 Mins- Edit Curvature
Переглядів 550Рік тому
CLO 3D Tools Explained, Under 2 Mins- Edit Curvature
CLO 3D Tools Explained, Under 1 Min- Add Point Split Line
Переглядів 1,6 тис.Рік тому
CLO 3D Tools Explained, Under 1 Min- Add Point Split Line
CLO 3D Tools Explained, Under 1 Min- Internal Polygon / Line
Переглядів 1,1 тис.Рік тому
CLO 3D Tools Explained, Under 1 Min- Internal Polygon / Line
How To Create Realistic Sunglasses, from Scratch In CLO 3D
Переглядів 2 тис.Рік тому
How To Create Realistic Sunglasses, from Scratch In CLO 3D
How To Create A True-To-Life Tote Bag In CLO 3D
Переглядів 4 тис.Рік тому
How To Create A True-To-Life Tote Bag In CLO 3D
CLO 3D Tools Explained, Under 2 Mins- Select Move
Переглядів 824Рік тому
CLO 3D Tools Explained, Under 2 Mins- Select Move
Thanks alot that was useful for me😊
is there a way to add topstitch lines for printing?
Hi, just playing around with this some more. At 5:27 you mention advanced options eg the Dress Form pull down etc. I don't have these but it seems if I hit the gear icon I can see and select all the advanced measurements. Im using 2024.1 so wonder if in the latest update Clo dispensed with these menu drop downs and just allow users to select what specific measurement datums they want to use?
Hi there, yep. This video is in an outdated version of CLO. They’ve made quite a few updates to the avatar editor and I plan to make an updated version of this soon!
This is interesting. I played around with Clo in 2018 for a while with a view to patterning corsets. This type of very close fitting garment had its challenges in Clo. Back then the avatars were quite basic and it seems they have made improvements as lots of users wanted to get something closer to their own measurements. I also played around with DAZ Studio and ended up making an avatar there and fro memory I think I saved it as an Obj file then imported it into Clo. Was much easier to morph the model in DAZ without distortions. It seems cup size is still something out of reach for the Clo user though. I use overbust measurement and bust circumference when patterning womens clothing. I feel it gives a better indication of cup size. The problem with DAZ was that detailed measuring metrics are a paid plug in whereas the Clo measuring tools are great. Its a shame though that you have to jump to and from different platforms to achiecve a better result.
They've recently updated the avatar editor and it is supposedly much better. I need to play around with it and potentially make and updated version of this. But yes, the bust is one area CLO has always struggled with. That and rises/heights of things. Browzwear probably does the best job for fit currently, but I hate the interface.
hii!Why cant i add Cut On Fold symbol onto the middle of the pattern which was unfolded with symmetric sewing?
Hi I am using add dart and would like to know how to keep the dart shape in the pattern after deleting the main pattern (leaving only the seam allowance and reference lines)
is there a way to divide the pages on acrobat? mac doesn't support print to adobe pdf :/
Do you not use illustrator? The PDF export from CLO really needs a bit of cleaning up in illustrator if possible. You can probably print them the same way in Acrobat, but I'm not sure you'll be able to easily move things around and organize them optimally.
This was so healpful but I hope you don't mine a few questions. 1) will this work in MD? Because thats what I have and I've been trying to figure out how to make belts and suspenders for a week now 2)speaking of suspenders could this be used to make them even thought it's a bunch of different strips of fabric instead of one long piece? 3) can you still animate in the program with the loop as an avatar? Like, if I animate the human avatar will the metal buckle follow
1) I believe all these same tools exist in MD and it should be fine. 2) You can absolutely make suspenders like you'd make a belt, it's just a bit different process, but same idea. I'll add it to my list of tutorials if you like. 3) I am not an animation expert, but I believe you'll have to add the buckles as a trim, not an avatar, in order for it to move with the garment. It's a bit more finicky and I know it can give you some issues, but people do it, so try watching some videos on animation. Sorry I just don't really touch animation! It's not in my wheelhouse.
How can I put Awl Punch/Circle in the end of my darts?Or they come automatically when I go to print layout .....
Good question. I just did a test with pattern symbols and the notch tool and can't do it with either. Let me ask CLO and I'll get back to you!
So I got a tip from the CLO community. There is no actual tool for this, BUT the internal ellipse tool- specifically the baseline one- defaults to a 5mm circle which seems to be the perfect size for a punch hole marking. You can just add one of these on the pattern and then drag it by hand to the place you want it. (which can be outside the pattern on the seam allowance) It's not perfect, but should do the trick! Let me know how you go.
thank you a lot!!!
I recently downloaded clo3d. You say in the video that each avatar has its own folder.. but mine doesn't. It also only has 3 avatars and I understand there should be 6. Any ideas where I could learn to trouble shoot this?😊
I've just downloaded the latest version to understand the issue and it seems there are only 3 female avatars now. I will check with CLO, but likely they have only made these 3 avatars compatible with all the new functions. The folder layout is also different, they don't each have their own folders anymore, but within some of the folders you will find subfolders with their names on it. Like for texture, you will find each different avatar's texture. Hope this helps!
THANKS!
Hello I’m trying to learn how to draft and grade my own patterns. What software are you using and how do you lock and secure your patterns to sell so no one will edit or copy them?
Hi there. I use CLO 3D for pattern making and 3D design. I sell my patterns on my website as PDFs and working CLO files. I basically secure them by copyright and asking people not to share or resell them. It's honestly just an honor system that I hope my users respect my work enough not to redistribute my patterns or make money off my work without their own contribution. So far nobody has exploited me or my work as far as I know 😊
nice
ua-cam.com/users/shortsZ1Ui9onlcPA?si=svlVoZXj2nRH0Ipd
Can you please make a longer version of this video? I really want to learn how do you do this handle at the end of the zipper :)
Best and helpful video. I like your video. Thank you for that
Can you make a video to download clo3d for free , it would be better if its one of the new versionz
It’s super easy! Just go to clo3d.com and in the top right corner click “free trial.” If you have trouble I believe it’s explained in the playlist Beginner’s Guide To CLO on CLO’s UA-cam channel.
I created custom avatars for different sizes, but I can't really change the poses for them, the avatars distorts when I do so. Also this only happens when the avatar is wearing any garment.
It’s best to change the pose without any clothes on. Just use your blank avatar, can be any size, and pose how you like. Then go to file>save as>pose. It’ll save a .pos file. Put that in a folder you’ve added to your library. Then open your file with your garment on the avatar and double click the pose file and your avatar’s pose will change.
I think this block doesn't work for developing a jean pattern..
This is for a high waisted trouser block, but you could turn it into a jean, it won’t be a jean just following the steps in this video.
Great idea
Nicely done
I would love to purchase this. Can you send me a link to where I can buy it?
Http://clo3d.com
Amazing work
When I select Mesh Box, I don't see my Waistband to be in different colour and I am not able to identify & select the Waistband extension with Mesh tool. Instead when I do it, it's pulling the Waistband extension like how Hand does after Simulation. I tried to bring the Right side (not right side of wearer but on screen) of Waist band to Layer 1, but that is also not working to bring the Pant to a finish.
If it's pulling with the hand tool it sounds like maybe you're trying to use select mesh with simulation turned on? You need to turn simulation off when using select mesh. I recommend selecting in the 2D window to get exactly what you want and then click once on the green that you see in 3D and use the gizmo to move it. Let me know if this helps. It's really difficult to know exactly what you mean when I can't see what's happening on your screen in real time, but I'll do my best to help!
make it even faster next time
You can speed it up yourself if you want
Nice
You're really good ❤
after like 1 hour i got it! thank you for your tutorial
Thank you!!!!
Hi, how do I add a hem to a folded band such as a kimono finish line along the front?
This method should work the same if the pattern edge is a straight line. But if the band is already folded, do you need a hem? Or is the band your finishing?
I tied the ribbon, but it came undone as the fabric overlapped.😢😢😢😢😢
Did you adjust particle distance and collision thickness? You need to be sure the ribbon is no larger than 5mm particle distance and the "add'l thickness collision" is at least 4. Make sure you don't pull too hard. Let me know if this helps.
Can we get a tutorial
Please do a tutorial plzz
Wow thanks for the tips! This is brilliiant - and so needed!! Been so often frustrating with my attempts at editing the CLO avatars.. messing up the corresponding measurements when going in the wrong order or playing with the height measurements..
Need more of these
Hi! Can you also show how did you do sleeves? Especially the edge. Thank you))
I’ll try to make some short videos on things like that. They are crystal pleated using the pleats tool and the edge has elastic on it set to a ratio over 100, probably 120-140%
Hi Maam, From where can I download these avatars?
Hi there, they'll hopefully be available for download soon on my website, but in the meantime you can email me at hello@ides.studio and I will be happy to send them to you. Otherwise, they come with any of the garments available on my website.
You are amazing, thank you so much for such valuable and so well explained tutorial!! Much appreciated!
You’re welcome😊 Thank you for such a lovely comment!
I'm stuck on trying to sew the bag shut 😵💫
Like you want to sew it closed at the top or sewing the sides together? If you want to discuss your specific file I'm happy for you to email me at hello@ides.studio and give me more details and I will try to help! :)
Thanks a lot! I just finished my twist.
Amazing! I’m so glad you had success with it.
This quite simply does not work, and that's not even how you tie bows in real life...
I’m sorry you’re having trouble. It is definitely tricky! If you’d like more help you can email me hello@ides.studio This is 3D, not real life. You can not do everything exactly like real life, but this is one way to tie a bow IRL and would not have any impact on how the garment fits, so as long as it looks realistic, there is no issue.
the tutorial is so confusing because my clo is not acting the same way. it puts pints in different distances etc.
Ok well CLO issues I can troubleshoot, but when you say I overcomplicate it that's a different thing. What do you mean by "it puts points at different distances"? I'm happy to help if you give me more info. Feel free to email hello@ides.studio to go more in depth.
Isabelle, like always your tutorial was great. But for those of us that don't have AI, is there an alternative way to set up to print on Letter size?
Good question. I imagine you might be able to access similar print settings through Adobe Acrobat, which i believe is free. It could be a bit of trial and error to get it right. What program do you normally open a PDF in?
this is so overly complicated is so weird. Why are you making this in inches? they use centimeters in London.
Hi there. I do my absolute best to make pattern making as uncomplicated as possible. It is very difficult. I’m sorry you didn’t enjoy the video. I use inches because I am American and I am most familiar with inches. I try to provide the conversion as much as possible. I am not located in London, sorry.
Thank you so much darling 💓💓
How can I make a stiff bag? Because I want to do a very structured and sturdy one and I can’t find the right properties
The stiffest material I can usually find is under the CLO library as "Trim/Hardware" and then you can also bond the pattern pieces with the stiffest interfacing. It's not perfect, but it does work. If you ever need to straighten pieces out you can strengthen the pattern pieces in 3D and use your hand tool or pins to get them lying properly. I don't suggest keeping anything strengthened while working, but I do freeze things a lot when I make bags. Another tip is to turn gravity off in 3D so the bag isn't always collapsing onto the floor.
Definitely excellent!
My knot fabric is crossing each other. Please help
It can be really tricky. Make sure the patterns for the ties have 5 particle distance. Also make sure those patterns have "add'l thickness collision" turned up to 4 or 5. And always pull very gently when you're pulling them against each other. It takes a lot of practice. Let me know if this helps!
How did you do this?
I deleted all the sewing and added pressure to the pattern pieces so that when I simulated they all kind of exploded off.