Відео

I would need to see a Pic to let you know what's going on.

Thanks. Not sure how to show you a pic. Every time I post a link here to an image hosting site with my pic, the comment gets auto deleted.

@@adrian1kat send it to my e mail. Gang3012.ga@gmail.com

@@gilbertangeles5699 thanks! I just emailed you.

Depende cuanta carga le pongas, Mas es menos. A 50% 4 horas. A 25% 6 horas.

I ran that test on eco, however the generator picks up the acceleration on its own. I recommend this generator it works.

You have to shut it off and turn it back on. With the knob on running mode, not on choke. I try not to overload it. In my rv I'll turn one thing off before turning on another.

I have had no issues with it, the only downside it's only 1 gal gas. This generator is actually made by genmax. This model doesn't run on propane.

Yes, the steering wheel has to be unlocked and in neutral. We left the key in all the way for the unlocked position.

@@gilbertangeles5699does your battery not die by having the key in the ignition on the on pisition?

@alexer333 no I took precautions by turning on the vehicle when I stopped for the night. At least for 15/20 min to recharge.

Absolutely, it's still going strong. Get one you won't regret it. Comes with 2yrs warranty

The demco does the same, you do have space for a mid size tool box. I carry a small generator and an ice chest in that area. My titan has the titan box on each side for tools

@@gilbertangeles5699 thanks for replying. I now see demco has a top rail system to allow standard 5th wheel rails to attach to the Titan XD factory pucks. Now I can add a slider hitch and free up even more space.

The truck has been great and no issues with the cummins. I highly recommend the XD

I recommend the set up and it won't break the bank.

I'm guessing that like everything else there's lemons. Mine is still up and running. I use it weekly

Sorry to hear that, mine has been bullet proof. And still pulling 14k pounds.

@@gilbertangeles5699 mine can't pull itself out of the driveway.

the truck is capable of far more than it’s rated for. very under rated

I filled the tank and still has more than half after 9hrs of use. At 30% load

@@gilbertangeles5699 how much fuel does the tank hold?

I haven't run it for 24 hrs straight, but my guess is it would be like 2 +full tanks it only carries close to 3 gallons gas. I will tell you it's gas efficient.

@@SallyKokes-vr1zl 3.7 gallons

Very true. I think the purpose was to demonstrate that the generator can hack it, or not. For such purposes. Thanks for your honest comment. 👍

Thank you for all the advice. I'm on the fence as to whether to get one of these and to be honest, I have NO clue what I'm doing and would be afraid of doing damage due to my inexperience. One thing I will say is I was under the impression these buffers were used to remove the wax, but after watching a few videos I am gathering that they are actually used to APPLY the wax, and then the was is removed the old fashioned way, by a microfiber rag and elbow grease. Am I correct in that assumption? Thanks.

@dyates6380 you can use the electric buffers to do both. They sell really super low powered ones (typically sell for between $20-$50) and those are really only good for applying and removing wax and are so weak power wise you would literally have to try to damage the paint to do any significant damage. It's really not hard to restore a paint finish just like anything else you gotta do the research first and figure out what needs to be done in your particular case. Following a thorough decontamination procedure prior to doing any polishing or waxing (note polishing and waxing are two separate things all together) will make sure you don't run the risk of scratching the paint with dirt or debris left on the paint plus will ensure the wax bonds to the paint better and protects for longer. So you know polishing is for removing scratches, oxidation and restoring paint to its original luster while waxing is for protecting said finish. You really don't want to just wax unless your dealing with a really well meticulously maintained finish. Also these days the wax is old school technology, most synthetic protectants are way better and will last a year to multiple years vs wax lasting weeks to months. Modern day spray waxes (they still call them wax which is just confusing but really they have ceramic blended with wax in them which is what you want to look for) are the way to go because they're both easy to apply and last very long. At the very least I would do a clay bar and if your up for it a light polishing followed up by a coating of protection of some sort whether it be wax or synthetic. A good protectant you can get almost anywhere is Adam's spray graphene wax protectant. It's easy to apply and will last years but they have different grades which the difference is how long they last and how well they protect.

@dyates6380 also getting one of these machines will make your life way easier if your going to polish your vehicle especially if your going to wax it the old school way. At my age it's almost impossible to do wax by hand but with one of these machines I can breeze threw it in a couple hours.

@@SpreadingKnowledgeVlogs Thank you man. I much appreciate the advice. Very nice of you and I'll check them out this week. Thanks again.

I used the yellow foam to do corrections on the paint using the compound. Stating slowly on a 3 and and then going up on speed and keeping it at 5 or 6. Then clean it then wax it and shine it with the white foam. U can't go wrong. Sometimes it's learning and getting a hang on it.

Yes I used compound from same brand as wax with a 6 inch medium polishing foam from bauer to do minor corrections

@@gilbertangeles5699 "prep the paint" as in cleaning off any dirt/wax/iron/ etc.

You won't regret it. It can tow more than what the numbers show

Go for it. It can do it. The reflection I pulled is 11k filled to the teeth. Empty is 9500. Your truck is more than capable, and fifthwheel towing is easier than bumper pull.

I bought a 5th wheel 2022 28sawl wanderer toyhauler.. tows pretty good so far.. it's 8640 dry.. I don't plan on maxing it out.. it does have a gvwr of 12k.. but so far so good.. Love it tho .. it's defenatly a game changer to our life's on the road and in the 🏜..

Isn't it awsome ? You get to stop less. I already did it also from the same manufacturer as you.

I have the titan tank Works flawlessly 👍👍🤠

Is all 50 gallons actually available to you. I read some reviews that you can’t actually access all 50 gallons. I have a 2016 XD Pro-4x w/Cummins. Love the truck!

​@@rmorales1029 i heard last 10 are issues on roads with incline and decline. Flat roads never heard issues

@@cujo229 thanks David, good to know.

1500 lbs pin weight, payload 2200. I try to only carry 5 gal of water on the freshwater tank. And fill up only 40 gal of diesel instead of the 50.

@@gilbertangeles5699 are you sure? That's a Platinum Reserve and it's usually between 1700-1900 lbs.

I got those # from the dealership when I bought it in 2019. Never looked back since

Yikers! I'll share this with you and then I'll leave it to you. Go to a CAT scale and check your numbers. I've been searching for some rvs that I can tow with my truck. I have a Titan Platinum Reserve. They say my payload is 1600 lbs. They are wrong. My payload capacity on my truck is 1267 lbs. If I put myself, family and gear, then attach an 8000 lb trailer to the back, I'd be way overloaded. Not good. So check your numbers to make sure. I hope that helps

@@revgordon91 why the ef did you ask if you already had the answer?

You're right, very good point. Thanks.

Great trucks, no need for the 2500 or above ect..

Heck yes. It can tow

No because is still under warranty

@@gilbertangeles5699 well I hope to delete mine soon. I have a 2017 with 44k miles. I just want more fuel economy and better response. I already have k&n cold air intake.

How does the demco recon work with the turning point hitch is it compatible with the turning point? Or did you have to put the pinbox in locking position so it would work with demco hitch?