Відео

@@TZGreg Their aluminium, If I recall the support bracket to the pillion pegs are steel.

Thank you for watching. I ordered all parts before the MT's arrived in NZ... So I measured the pipe diameter of the 450 SR and ordered the adapter according to that. So they ended not being the same🤦🏼‍♂️😄. But being quite creative I always make things work, reason I had to make some adjustments😁. Stay tuned and see the videos to follow.

@@150_ADVenture Thank you for watching. I find them very handy and so far they get the job done. A bit of a hassle to mount but putting all my luggage inside a pillow case each side, makes it easy to remove.

@hein3g cheers for that.

@@paololonzi Hi mate and thank you for watching. Yes, in the video I installed them incorrectly, but corrected afterwards. As the mating surface on the subframe has a small contact surface,which is why I thought the narrow side should face inwards

@@ChMNTZ Thanks for watching. The seller sent me the correct one since the video was made. So it says MT now😁😄

@@hein3g I enjoyed that video so much. Nice tools you have there !

@@jonnothetrucker Oh awesome mate!... Thanks for watching and it's good to hear that this video helped you🙏🏼. Thanks for your feedback👌🏼

@hein3g yeah mate, easy as ! Only thing I had to work out was to trim the length of the adapter outlet so that the slip on sat at the right length

Thank you for the positive feedback. I try😄🙈.

Hi mate thank you for watching. I've ridden this bike all the way from 100 to 158km/h and haven't felt any instability or vibration as some of the reviews claim. Being a small displacement I do notice when I load more weight in terms of pulling power. That being one of the reasons I'm sticking to the 14t sprocket. Perfect gearing for going offroad.

@@hein3g Hi mate, thanks for your response however, I was refering to the muffler and it now being louder. I am wondering if it is not overbearing at a constant high engine rpm ?

@@150_ADVenture Got ya , 'load' - 'loud'. Yes it is a bit overbearing at constant speed,but you can buy a insert to quiet it down for those long road trips.

@@chivascap Thank you for watching. So far I have not had a big fall yet, and if I do I will probably scratch the exhaust a lot and if pannier bags are fitted will probably bend the mounting brackets. The tube design looks stronger because of the tube that runs around the rear bracing on the bracket on the other side. Was going to see where my contact points are when the crashbars are fitted. I will look into it and see what I'm going to do.

@@150_ADVenture Hi mate,thank you for watching. It's actually better than I thought. Pairing it to my cardo also works better than pairing to the bike. And because my phone is paired to the bike ,my steering controls still works. It's only the volume I still have to do from the cardo unit itself,which I am currently using anyway.Pre-downloading offline maps also works great. So,so far it was worth the price.

@@hein3g I had a look at your link for the unit, a reasonable price.

@@hein3g Hi mate. Now that you've had a chance to travel with the GPS, I was wondering how the mounting mod went. Does it stay in one place or do you have to reposition it after you've jumped the bike or ridden over corrigations? Cheers for the feedback.

@@EddyOtway Hi Eddy and thanks for watching. You don't need it, it's just an ocd thing for me to keep it's original shape. I want straight lines on the seams.

Thank you for watching. I recently uploaded a video to my channel where I install the screen and added a link in the description. Check it out

Thank you for watching. I appreciate the positive feedback.

Thank you for watching. I'm not a big talker😄...but also trying to keep talking to a minimum and videos simple so that anyone can understand.

Hi Mate and thank you for watching. If you look in the description below you will find the links to the accessories used. I used the MTC-13 model. Thank you

@@hein3g hola, es que lo veo desde el móvil y no me sale o no sé, donde mirarlo. Gracias

Hi Diablo,and thank you for watching. I haven't used mine without the racks, but I think they will be very floppy and loaded with weight I don't think that is something you want. That will affect the handling of the bike. You would also want to keep them away from going under the rear wheel arch.

@@hein3g Fair enough, thanks for your thoughts!

@@hein3g Which size are your bags anyway?

@@Diablorf Mine are the medium size available which is 14Ltr each. Then I have the one I strap over the top that is another 20Ltr.

​@@hein3g I thought yours are the large size (24L each). The 14L bags look bigger on the bike then I thought.

@@javierc2726 Thank you for watching,yes you are correct. Cheaper alternative to gps for those not wanting to spend the extra money. For now I can use it downloading offline maps when there's no cellphone signal, until starlink is up and running.

@@kervincruz3561 Thank you for watching. I have a video on my channel of the 'canister' install. 'yoshimura slip-on'

@@javierc2726 Thanks for the 'positive' feedback...I'm new to the youtube scene. So, I'll get there.

@@hein3g No problem. Stick to 16:9 aspect ratio that is the most common used

Having a satnav ram mounted makes too much leverage on the bar. I’ve done similar using a rather heavy android phone with a large battery. Sikaflexed a amps mount to the back to provide a near flush mounting held on with thumb wheel screws to the bike mount. I leave the bike at meets etc. figured if someone has enough time to work out how to remove it, I’ll take it off myself

@@briancummings4912 Thanks for your feedback and can see that being a issue with the arm extension. This unit being a cheap buy there is not much to it to be honest, doesn't weigh much. So I will see how it goes. Just don't want my phone on the handlebar flopping around and exposed to rain. This unit is cheap, a phone not so cheap.

@@kostiantynlevchenko5415 Thank you for watching. On the theft side of things I think the only alternative is to use the provided arm so it's removable but will flop around being so far extended. The one wanting to steal this will break the unit and the bike if he really wants it that bad.

Thanks for your comment. If you watch the whole video😂 you'll see I do weigh them.

50 % reduce ​@@hein3g

Not worth the cost to save 100g

@@SteveCooper-j4e You are welcome to keep the horrible looking plastic guard🤷. For a better look and weight save I think it's worth it.

@@hein3g its about 500g and better looking. But the Standard also looking nice

@@150_ADVenture Hi Mate. I honestly cant fault anything on this bike. Everything is of same quality as all the well known brands out there. In some cases I find the Cf moto went the extra mile with clever thoughts... Like the adjustable screen, simple but clever.Just makes the overall product so much harder to ignore, especially for the price.

@@hein3g Thanks mate, I am test riding one this weekend with the view of buying it. I'm very pleased to hear your feedback. Cheers for that. 😁

@@150_ADVenture Thanks for watching mate. If you go to my channel, I have a video of tank and pannier bags. Might help you get an Idea. And in all my videos I ad the links in the description below for the accessories I used. Thanks🙏🏼

@@hein3g brilliant mate. Looking forward to watching them. I am looking at buying one of these bikes and am going for a look this weekend. It's great you're sharing your resources with the WWW for others to benefit from. 🙏🏽

Hi Ricardo and thanks for watching. Wow, what a weight saving! I will definitely look into it...

Thanks Mate, appreciate your feedback Thanks for watching.

Hi mate, thanks for watching. I ordered this plate a long time ago and didn't get round to fit it. At the time there was not a lot of options and I did like the webbing design on the sides more than the ones available at the time. I guess I can remove all the bolts and weld it to one piece if I really want to.

@@pabloPawel Ha Ha,yes.... It was torture 😂