- 12
- 938 958
Ryan Endres
United States
Приєднався 24 жов 2011
1991 Syclone For Sale
$35000 1991 GMC Syclone (SOLD)
Link to a full write up more photos below. Located in Madison Wi
ryanendres.wixsite.com/syclone
California truck for 26 years, no rust
97,500 miles, repainted (photos in link) in 2020, all cladding came off and fixed, new window seals, door seals, lens.
Real Z06 staggered rims (no I do not have the factory rims)
C5 brakes upfront
ABS delete (kit from Sport Machine)
EGR delete
Oil filter relocated to the block
L35 heads
Larger intercooler pump hotwired to key on
mini starter
rebuilt transmission from GM in 2016
new fuel pump and filter
recent tune up with all new fluids
new wiper motor
AC is ice cold with R11
Factory radio was rebuilt
Solid steering shaft
Vacuum lines replaced with a kit from Sport Machine
battery replaced in 2023
Aftermarket boost gauge, boosts to 14.5 (stock spec)
Computer is original with no aftermarket chips
Catalytic converter is on the truck
Original manuals, and other brochures, magazines, and carshow stand are included in the sale.
Clean carfax, clean title, all my receipts from the past 4 years.
I have owned it for 4 years and have put on about 2500 miles going to car shows, cars and coffee, cruises
$35,000 no trades, as is sale no warranty
Link to a full write up more photos below. Located in Madison Wi
ryanendres.wixsite.com/syclone
California truck for 26 years, no rust
97,500 miles, repainted (photos in link) in 2020, all cladding came off and fixed, new window seals, door seals, lens.
Real Z06 staggered rims (no I do not have the factory rims)
C5 brakes upfront
ABS delete (kit from Sport Machine)
EGR delete
Oil filter relocated to the block
L35 heads
Larger intercooler pump hotwired to key on
mini starter
rebuilt transmission from GM in 2016
new fuel pump and filter
recent tune up with all new fluids
new wiper motor
AC is ice cold with R11
Factory radio was rebuilt
Solid steering shaft
Vacuum lines replaced with a kit from Sport Machine
battery replaced in 2023
Aftermarket boost gauge, boosts to 14.5 (stock spec)
Computer is original with no aftermarket chips
Catalytic converter is on the truck
Original manuals, and other brochures, magazines, and carshow stand are included in the sale.
Clean carfax, clean title, all my receipts from the past 4 years.
I have owned it for 4 years and have put on about 2500 miles going to car shows, cars and coffee, cruises
$35,000 no trades, as is sale no warranty
Переглядів: 172
Відео
Trans AM LS swap - rolling launch
Переглядів 2,5 тис.5 років тому
More details: 1970gto.webs.com/1977-trans-am-ls1-protouring
1977 Trans Am LS swap SOLD May2020
Переглядів 35 тис.5 років тому
1977 Trans Am LS1 (5.7L) swap (it is a WS4 car not a WS6 as I stated in the video) SOLD: May 2020 more details: 1970gto.webs.com/1977-trans-am-ls1-protouring
1977 Trans AM LS1 ProTouring
Переглядів 1,8 тис.5 років тому
LS1 swapped 1977 Trans AM: 1970gto.webs.com/1977-trans-am-ls1-protouring
Part 2 Isuzu Rodeo Trooper 3.2 3.5 timing belt replacement
Переглядів 459 тис.11 років тому
Part 2 Isuzu Rodeo Trooper 3.2 3.5 timing belt replacement
PART 1 Isuzu Rodeo Trooper 3.2 3.5 timing belt replacement
Переглядів 270 тис.11 років тому
PART 1 Isuzu Rodeo Trooper 3.2 3.5 timing belt replacement
PARRT 3 Isuzu Rodeo Trooper 3.2 3.5 timing belt replacement
Переглядів 169 тис.11 років тому
PARRT 3 Isuzu Rodeo Trooper 3.2 3.5 timing belt replacement
Sounds wicked… I would guess.
Good afternoon do you happen to have any video of knock sensor replacement for 1998 Isuzu Trooper??
Complete and concise ! Very good and helpful! Thank you!
This is %100 on if you follow this no issues #2 TDC, HALF MOON TIMING MARK that lines up with oil pump bolt to left of crank, click to 12 on passenger side , then click to 9 and turn to 12 on driver side .all set %100
03 Iszuz rodeo sport V6 3.2 l DOHC WORKS
What about a SOHC. No onstructions anywhere on u tube or any other videos i find
How do I set my timing marks on a 1997 V6 3.2 SOHC
Ever figure that out?
@@cwkralovec1988 yes I just lined all 4 marks on belt with mark on cam pullys , cam marks and took chance,wasent going any where just sitting there and I needed ride. Runs great.never found any thing on that motor, nowhere. Guess Isuzu figure out sell to Honda and make money.
I find nothing on a 1997 3.2 V6 sohc
Not a interference motor like every one said
What about on a 1997 sohc engine
❤which side piston must be up at TDC
Damn Isuzu made this overly complicated and completely unnecessary. Drive the exhaust cam internally from the intake cam and a cam timing belt sprocket directly mounted on one of the cams is so much easier and less complicated. No under drive gear ratios requiring valve cover to be removed. This is a great explanation of the set up. It looks like a factory training video.
Sweet👍
pay attention to the click to 9oclock and rotate to 12oclcok on LHS cam
Oh yeah!!
No such thing as a ws6 1977.The package came out in 1978 with 8 inch snow flake rims.1977 is a ws4 so how do you have proof it s a ws6 car?Impossible.
I miss spoke, and I noted it on the web page for the car this past March. The sold in May 2020.
nice do you have a price.
Did it sale?
Yes in May of 2020
Some funny info going on here. PHS documentation proving is a WS6...........sorry WS6 did not come out until '78. Also, the statement on the GM ecu location.......GM computers are located in the engine bay on LS vehicles.
@F-Body Jon Yes, in the write up on the car I indicated that I was wrong about my WS6 statement. Relocated the ECU cleans up the engine bay. The car sold in May2020
Georgious car!
Can I put 2010 GMC Yukon Denali engine in a 96 impala ?? will it work ?
How much?
details: 1970gto.webs.com/1977-trans-am-ls1-protouring
really nice car, just needs the t tops.
@@rickyzuela7569 no it don't. it runs fine without water leaks
Love It. Beautiful Car!
What vehicle did you use for the headers, also any place it’s hitting? Shorties or long tubes. My brother is getting ready to do his 79 headers where the only part wasn’t sure of. Was pretty sure f body would work
What I would give for this bird..got a 77 formula sitting in my barn right now unfortunately I've lost the budget for fixin her up :(
Are you selling it?
@@HPPRACING was considering it
@@jonathanlobo8485 what are you wanting for it? Any pics?
@@HPPRACING around 2500. Dm me?
@@jonathanlobo8485 lsstozzie@yahoo.com can you send me some pics?
My 350 runs really cold it really surprises me
Very nice car I have a 77 carousel red trans am It has a 400/4sp white interior I’ve purchased an LS1 automatic from a corvette Considering doing the swap 400 seems to be a little tired and under powered. Great looking car
But will she chirp 2nd?
Love love love this car.. where is it? Haha Gotta keep track of it incase Im in a position to make an offer. *sigh. I had a 77 as well.. She had a Nunzis NY blue printed poncho 400 under the hood, 411 gears, 2500 stall, AC baby! Coil overs, herb reed sway bars, bushings, coil-overs, Custom widened, 15” pont Rally 5 spoke wheels. caddy white acrylic w metal flake, factory red/black fire chicken, FLA car-white interior. Ran 12s all day, daily driver.. Sold it for like 5500? many moons ago and I miss it so :(
So how much are you asking for i see you did a lot work to her
The details are available in the write up: 1970gto.webs.com/1977-trans-am-ls1-protouring
very nice what did it sell for
It is for sale: 1970gto.webs.com/1977-trans-am-ls1-protouring
Nice car but the Corvette engine covers need to go !!
spry them out put trans am i guess
@@louisgreenberg5384 just spray them black or whatever but to open the hood of a Pontiac Trans Am and see Corvette is ridiculous ! All that attention to that car and they didn't bother to correct that ?
How much ?
$40,000 ... link to a write-up in the comments above.
took a while to sell, huh? link says: "$34,000 (OBO)"
@@iwaswithyourmom9410 took about 2.5 months to sell it.
How did you affix the shaker to the engine intake assm?
good question, I think we all wanna know
Welded/ JB welded lol
@@mikerose9313 just some brackets. The guy I bought my car from 6 years built another one and he recent sold it to Trans Am Florida: transamflorida.com/TRANSAMFORSALE4.htm Look up REF#1638; they have better photos on their Facebook page of the mounts.
just some brackets. The guy I bought my car from 6 years built another one and he recent sold it to Trans Am Florida: transamflorida.com/TRANSAMFORSALE4.htm Look up REF#1638; they have better photos on their Facebook page of the mounts.
just some brackets. The guy I bought my car from 6 years built another one and he recent sold it to Trans Am Florida: transamflorida.com/TRANSAMFORSALE4.htm Look up REF#1638; they have better photos on their Facebook page of the mounts.
It would have been nice to hear that beast run
click the link above for videos of it running and driving
@@ryanendres6479 Ryan ciao salve tu parli italiano ?
@@ninnirusso8763 no I only speak English
@@ninnirusso8763 No I only speak English
Beautiful car brotha 👍🏽👍🏽👍🏽
Nice car and LS swap. Only thing that I don't like is the plastic covers that say Corvette. I would lose those quickly.
what type of LS is it
LS1 our of 2001 Trans Am
Video quality is very poor.
Muy profesional pero se mira fatal para un video que necesita detalle. Back video when need ditail.
Why even post this 1964 quality shit.
Xxx
Xxx
+Michael Chan xxx
Please tell which must be up
Which piston must be up at TDC
❤
As said earlier, this procedure DOES NOT apply to the 2004 3.5l direct injection engines. Let me know if anyone is looking for that. Dont care to but I'll post a video on it if I have to
I would be happy about the video for the 3,5l V6 DI Engine (6VE1)
I wish you would!
This will not work on the 2004 direct injection 3.5
Correct!
That engine is also an interference engine. If the timing belt breaks, there will be damage.
You all helped a lot thanks . Willy B
This is for DOHC correct? The timing marks differ on the SOHC more like 11 o'clock on the left and 2 o'clock on the right. Just need to know if it is the same procedure.
This is for 98 and newer. They are all double overhead cams.
I need SOHC instructions
gracias por excelente explicacion lo mejor para usted....
don't see a shit
Hey Ryan, where is part 1 of this series? I view it and its some old guy with a funky accent?
the quality of this video sucks
alguien me podría desir cual es el apriete de bancada de motor izuzu 3.2
hola mis amigos de UA-cam y les doy las gracias por la información que usted me dio