Відео

Thanks for the video. I have been looking for a review of the XLT with blue cruise. Unrelated… but can you tell me where you got your sunglasses? I have bought similar pairs from Walmart and they keep breaking. Yours look more sturdy!

I have the same tires on my Bronco in size 35x11.5 r17. I have to run them at 43 psi to wear evenly. At 39 psi it was wearing the outer blocks too much.

i got aftermarket shocks but i have the same exact problem.. i think it's the shock oil that's missing to get you the effect of the other crawler you show at the start

So pleased there's an alternative from the ripp off name brand one. Any idea if the steering rack bushing is also available elsewhere?

YOU ARE A LIFE SAVER FOR MY CUSTOMER ! God bless YOU !! Other videos never shared you’ve got pull the latch up and set in place , I was trying to take whole darn door apart to get to the metal latch. Your trick worked as shared! 😎

I had these rt01’s … the worst part is the snow traction out of these tires. Nothing but sliding everywhere. They are amazing for any other surface.

Your plug color looked about right. You want it to look almost brown/tan…. Too black and sooty is rich. When you run it white, that’s too hot/lean

Do you still have these on? If so, have you noticed alot of rock chips?

What shocks are on the bouncy Bronco? I have the same problem, bought injora 53mm and they stuck even worse

I don’t even notice the noise unless the top is off.

Great video

Thank you!

Way too early to change plugs.

Wrapping a bronco for a client and this was an awesome guide you're the man 🤘🏻 I laughed at the end because it was so much easier than I thought.

I got a 24 xlt and I love this truck got 3 months free blue cruise. But it cost about 45 dollars a month to keep it after the free trial

Very useful, thank you for your video 🙏🏽

Where did you get that metal bar at?!

so far this is the only video I’ve seen that shows how to reset the latch mechanism, searched for 4 hrs on forums and other videos, we recently did full PPF on a 2023 F250, when the passenger door handles gave us trouble, your video helped us finish the job this will be used for training with our new fleet contracts just in case… it’s not as easy as it should be once again. much appreciated

That plug for the proximity sensor, where does the other end of that lead?

Thank you

I have falken MTs are these good in rain? My MTs seem to slip and have bad traction on wet surfaces, and seem to wear uneven and pull toward the right when I don’t rotate them often

👍

Did PPF on one of these today. Pro tip to anyone having trouble with reinstall and needing to pull the latch out, use a really deep hook. Doesn’t have to be long but it does need to hook over a pretty thick piece of metal. Also make sure you’re pulling it ALL THE WAY out. It takes some serious force but the 3 pronged metal latch will pull flush with the inside of the door. Make sure you get it to that point before trying the rest of the steps or you won’t get it to set in before tightening.

I can’t find your video on speakers and install did you have one ?

Tread pattern looks like the RT trail

Just had to replace the taillight assembly on my '22. Your video made short work of my job. 15 minutes to completion. Much appreciated!

I placed mine with the bolts forward. Easy to get to in the feild if something happens. I'll be able to use a power ratchet. And most importantly I can look underneath to inspect and see if any of the bolts are coming loose or backing off. I would hate for one to come loose not know it and have it catch something while I'm steering going down the road

I saw your car on the street

Gonna have to try this out. Thanks

I have a 2022 Bronco Badlands. Thanks for posting this video on replacing the factory front wiper blades with the Scrubblades wiper blades. Definitely helped.👍🏻

It’s a lot easier to tighten the bolts from the front for me at least. Does it matter as far as functionality?

How is the noise in the hwy I was thinking to buy those tires but I don't like noise in the hwy

Why are you making this more complicated than it needs to be, just use the “non as built folder”. Click click and you’re done.

Thank you. Is it the same process for the passenger side?

Let us know when the wings are available for purchase. I want to do the same for my hardtop

Hi there. Great video. Did you do a video about raising it up using those trx4m parts?

Did you get to the dyno?

thanks guys, you guys save my day and the same for many other people around.

I was about to pull the trigger on some nitto trail grappler MT for my bronco. I ran the ridge grapplers on my jeep and liked those. I will say you’ve sold me on these RT. My bronco has the Sasquatch package, I’m going with the 315/70/17.

1:30 What do you mean it’s not a ton? It’s a ton and more than a half. 👍🏼

How hard was it to remove the handles ?

I can’t get the jaws to stay put when tightening or loosening the nut. Any recommendations or do I need a new part? Thank you

No frills, just solid info. Thank you.

Thanks!

Thank you!!

Did you get it to a dyno yet?

Looks like a peice of construction equipment..there is no good ohone mount the dashboard is too high and it blocks the windsheild.n.nice try though

Can you still recline the rear seats?

How did you turn off the orange light ( Amber ) in the headlights ?

Did you get any data on this?