Відео

I figured out how to grind fine for espresso by finding a UA-cam video. Y took off the hopper and the small screw won’t hold anymore. No idea how it was in place before. I wonder if there was an extra piece, like an anchor to make it hold.

We got the 2018 2.0T with a 6speed mt last fall with 35K miles on it, It did need a new radar unit, that the dealer replaced at no extra cost, and we love it. A new radar would cost about $1K to replace so don't bump it or plow snow with it. The negatives are all the same except for the braking error. Haven't seen that one yet. The collision avoidance error is annoying and so far it reboots when you turn off the car and restart it but it's better than it not working when you really need it. It seems to have something to do with the Lane Change Assist system. It doesn't like it when you change lanes without using the directional even when you are all alone on the highway.

Thanks!

I find the manual as very anemic compared to my SRT4, which is more raw and has much better feedback feel.

I just got mine. UPS was supposed to deliver it from 1:00 pm to 5:00 pm and didn’t. We waited and left by 5 because we had things to do. They left a not saying the would deliver it at 7:00 pm next day. We had to be gone even earlier than 7:00 pm. I had to pay extra for UPS to hold it at one of their locations. So far the grinder is not grinding as fine as I need. Maybe it needs time to adjust. Who knows. My cheap grinder (Crux) grinds finer so far. Wish me luck, or I will wish me luck anyway. $300+☹️

Thanks so much for the video, made changing my wipers a breeze 😊

Buy a Tesla pussy

Just got mine but the fork was impossible to pop in. It just jams and it feels like I'm going to snap it. Pretty shoddy design tbh

Thanks for the post. Very helpful.

Excellent, thank you.

Remove wheels too so it won't roll away

Hello Matt, In order to grind Turkish coffee which number is best? Thank you very much

I did it with your help. Thank you! Great video by the way good instructions.

Bros complaining ab 26 mpg while driving spiritedly💀

I think u did a great job. Though I'm worried of over spray and would of used cardboard, drop clothes and a bunch to cover up the door, deck and surrounding areas.

Thank you for the super simple explanation. Got my K&N installed. Set it and forget it.

PEACE&LUV

I have always activated my yeast according to yeast manufacturer instructions. Is there a difference if you sprinkle it on?

Was at the dealer today. They wanted $85 to change it out during the oil service. With this video, it only cost us $20. Thank you so much.

I appreciate you getting right to the point and being concise. Many other tutorials are unnecessarily long winded. Cheers

I have a 2020 accord sport 6 speed cv2, that i bought used through Vroom with 6k miles on it in 2022 and i have added the PRL stage 2 intake, deleted the resonator and mufflers and i have had 0 issues with my car and currently have 19k plus miles on it and i have NEVER had any of these issues with my car.

Thank you for making this. I also appreciate all the comments!

My dream car shift!

Every issue you named.... I dont have 😂 The leg resting on the center console... Mines padded ? 🤔 A tank of fuel will last me almost 2 weeks 🤔 The TPMS thing for sure is irritating, its always on 😭

It looks like the video is cut off at the beginning. It starts directly at "4th I have a brush". What are we missing for the first 3 items?

Flash your computer..sounds like issues are software related. The gas tank issue is a huge one. Great video

This was incredible. You got every camera shot! Thanks!!

Check your battery voltage for the mitigation system low battery voltage will trigger it.

Greta video and thank you, I dropped you a sub

You really need to unscrew the end caps off the brush bar and clean them out. If your bar was that dirty, you will be amazed what’s in the end caps. When they get plugged, the bar won’t spin.

I just got 250k on my 2018 accord 2.ot.....🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

Don't forget to check if your winter tires are directional - there should be an arrow pointing in the direction of rotation

Don't bother watching this. He doesn't record the next step(s). He should delete it if he isn't going to record steps 2, 3, 4, etc.

$50 replacement on top of the oil change. Bought the filter for $28 using a coupon from the dealership. Saved $22 for 15 minutes work. And I’m sure it’ll take 5 next time. Thanks$$$

This is a pretty decent guide. One important thing you missed was wiping down the surfaces with methylated spirits or cellulose thinners. Getting any grease of smooth metal is really important. Also, lots of people use all in one paint/primers and thats completely fine but if you want it to last, not just look good, you need to build up the thickness of the paint, this decreases the amount of moisture and oxygen that gets through the paint film to the metal in order to start rust. You can also use a primer high in zinc if you want to increase the time untill repaint. A couple of coats of rust inhibiting paint/primer is a good basic spec, if you want a long lasting system then it would be zinc primer, two coats of micaceous iron oxide and one of of metal gloss...that should last 15 years or so. Also wire brushes are probably better on your angle grinder than sand paper.

One of those hose clamps was EXTREMELY finicky

I have a 2014 Accord V6 with absolutely no problems. Tend to stay away from turbos.

No primer?

What about a needle gun scaler?

Can you move this snowblower backwards and forward when the engine is off? Or do you always need to start the engine to move it?

this is a perfect video. thank you mate

This is just how you change a tire in general

Nice video.

Gracias

what do you do if you have holes in rod iron fence?

Brother, position your prompter to where your camera is or just show other footage with voiceover. Currently, it looks like someone made you read an essay at gunpoint.

It would have taken me 33hrs to figure this out. Thanks!

Thanks for the video. I watched it then changed the filter. Money saved!

Watching a few tire videos, a few seem to have jack stands as a safety measure, good idea?

You don't need to unplug shit just unscrew and lift cover up slightly and stick the new one in he made it much harder