Відео

This video outlines the practical uses of the: SprayScan Mobile Sustainability Monitor (mSM) SprayScan Mobile Patternator (mPT) SprayScan Mobile Test Chamber (mSM) SprayScan Embedded Patternator (ePT) For more information, visit www.sprayscan.com

In this webinar, Refinery Application Specialist Chuck Munro along with Research Engineer Kathleen Brown discuss recent innovations in oil and gas spray technology. As Chuck discusses, oil and gas is a slow industry to change. But with recent innovations in spray nozzle technology validated by CFD studies and fluid flow simulations, oil and gas companies can find news ways to do standard proces...

In this video, we've slowed down the first stage of a hollow cone spray forming. You'll see the unique rotating dribble that initiates the hollow cone spray. At the end, we reverse the video so you can watch the spray reverse directions. The hollow cone spray pattern is ideal for cooling, washing, gas scrubbing / cooling, dust control and fire protection. Visit: www.spray.com/resources/spraying...

Visit: www.sprayanalysis.com/modeling-services/modeling-solutions to see more fluid flow simulation case studies! In this video, we use fluid flow simulation software to assess the sprays of various agricultural nozzles. Each nozzle is a little different and, therefore, the sprays and coverage are a little different. CFD fluid flow simulations are an excellent way to measure coverage, drift, an...

In this special edition webinar, we take an in-depth look at sensors and how you can apply them to spray applications. Research Engineers Kyle Bade and Paul Vesely will discuss how we use sensors in our current technology, what characteristics of a spray are worth monitoring with a sensor, and why the data that sensors transmit matters for your spray process. Throughout the talk, Kyle and Paul ...

Why do you need a laser cross-section to accurately measure drop size? The probe volume is formed by two (or four)These four, intersecting laser beams form the *probe volume*. What's a probe volume? This is a non-intrusive, high spatial-resolution measurement point. The key here is non-intrusive. Using lasers, we can accurately assess spray characteristics as the spray will behave in its enviro...

In this video, we simulate an industrial coating application, where coating is done using a robotic arm. In such instances, only manual tests can prove whether the nozzle is worn and these tests are conducted by physically assessing the spray pattern degradation. Until now... Using the SprayScan mPT auto-processing software, manufacturers can automatically assess spray nozzle quality without th...

In this video, we use our portable laser sheet imaging device to shoot a simulated cough through a disposable surgical mask. The "cough" is an air and water mix sent through a tube connected to an AutoJet spray controller. This study and set-up was pure curiosity - we wanted to test the CDC recommendation that if light can pass through a mask, then it's deemed ineffective. See more mask videos ...

In this video, we use our portable laser sheet imaging device- to shoot a simulated cough through two masks: a surgical and a double-layer cotton. This combination is also referred to as double-masking. The "cough" is an air and water mix sent through a tube connected to an AutoJet spray controller. This study and set-up was pure curiosity - we wanted to test the CDC recommendation that if ligh...

In this video, we use our portable laser sheet imaging device- to shoot a simulated cough through a KN-95 mask. The "cough" is an air and water mix sent through a tube connected to an AutoJet spray controller. This study and set-up was pure curiosity - we wanted to test the CDC recommendation that if light can pass through a mask, then it's deemed ineffective. See more mask videos in our Mask T...

In this video, we use our portable laser sheet imaging device- to shoot a simulated cough through a double-layer cotton mask. The "cough" is an air and water mix sent through a tube connected to an AutoJet spray controller. This study and set-up was pure curiosity - we wanted to test the CDC recommendation that if light can pass through a mask, then it's deemed ineffective. See more mask videos...

To register for talks like this one: www.sprayanalysis.com/virtual-events/webinars. Spraying is a complicated process. It requires energy, inputs and knowledge about the system and application. In this highlight, Chad Sipperley explains why changing your pressure doesn't just change your spray - it changes your result. What seems like a minor change in your process could mean a major change in ...

Whether sprays are a major part of your process or a minor one, you're spending some amount of time, energy, and resources to use a spray to do something. This something might be spraying pesticides, coating a surface, evaporating a gas or developing a new product. Regardless of your application, you're taking a bunch of liquid and putting it through a nozzle to transform that bulk liquid into ...

Ever wonder why the CDC does NOT recommend single layer masks? In this video, we use our portable laser sheet imaging device - the SprayScan mPT - to shoot a simulated cough through a single layer mask. The "cough" is an air and water mix sent through a tube connected to an AutoJet spray controller. You can see from the spray that goes through the mask that a significant number of particles are...

How Understanding Spray Nozzle Basics Leads to Innovation

Electrostatic spray testing in the lab

Robot spraying the SprayScan mPT test chamber for quality control

Transfer Efficiency: The Key Sustainability Marker You're Not Tracking

Testing Pulsed Spray Using a Conveyor

Slow Motion Pump Bottle Spray

Out of the Lab and Into Your Hands Bringing Practical Spray Technology to Your Process

What is CFD and Why Does it Matter

FogJet Thermal Imaging

FloMax Nozzle spraying up

FloMax Nozzle Demo Side View

FloMax Nozzle Demo

Surface Tension vs Viscosity

CFD Gas Quench

FogJet spray illuminated by SprayScan mPT