Відео

Nice, my surround speakers are cheap active edifiers, good all round bass and treble. Keli L/R monitors, used a cut down gazebo for above, and temu projector stands for surround speakers. Works and translates to my 7.1 system

Do you have bass management on your recerive? Maybe the extra signal on the LFE output was the lows that were redireceted from the other channels.

Thank you robin williams

Hello Sir, this video inspired me to get that device but I'm having issues with connecting it to my studio with a Fastrack pro audio interface, please is there any suggestions i can get from you? how do i get it to work my surround speakers with either my Fastrack pro or direct to my tv? must i buy a receiver or amplifier to get it to work?

I'm just trying to delivery a STEREO Documentary mix to 5.1 and in anyway I can do it. I use Cubase ADM Plugin but when I render the Audio, there is sound only in the two first channels.

Control room was a game changes when it came out HOWEVER, it's been YEARS and Steinberg is still limiting us to 4 Cue mixes which is not enough when tracking to most basic rhythm section (Drums, Bass, Guitar, Piano, Vocals). Why can't the cue mixes be only limited to the amount of outputs we have? isn't the who idea is to be able to send as many Cue mixes your outputs allow? Steinberg please open the option for more Cue Mixes so we can use the full potential Cubase has!

What about the Dolby renderer ? You don't use it ?

Hi, thanks for the video, you've encouraged me to create a 5.1 setup. I see that you have a Steinberg interface, I'd like to know if the ur44c interface could work for this purpose. The specifications say that it has 2 main outputs (L,R) and 4 line outputs(1L,1R,2L,2R), in total there would be 6 outputs, but I'm not sure if I can configure it in Cubase since I haven't seen information about it anywhere. I hope you can answer my question. Thanks.

using an upmixer to create a decorrelated version of kicks or bass to send to the LFE is best practise IMO. I don't want an octavised version in 95% of upmixing

Great video, I needed a simple way to listen to atmos and this is it!

I have beringer audio interface with 2 sound output left and right, Will it converts 2 to 5.1 if i get the sound decoder

Is it true, ? This devices decode DTS natively, but for Dolby only virtual.

Love you videos i was building my 7.2.4 system while you were building yours. I miss your videos hope all is well.

Thats very informative Video - Well done!

Great video and a great and a very useful channel overall! Thank you for the information!

Saludos desde México y gracias por sus videos.

I understand that you're looking to propose a budget Atmos. The used market for studio monitors is cheap, you need at a minimum the same speakers for the sides and rears. Then also all the same for height, for the imaging of object-based audio. They don't need to be all Yam 8's but you are not going to get imaging between studio monitors to PA speakers and then to computer speakers. Kali 6' or JBL 5'. I'll definitely agree with the 3 identical across the front just turn it upright like @SilentSynergyMusic said or use Phantom mode.

A lot of bad info in the video. The yamahas HS8 HS7 and HS5 are not constructed to be used layed on their side because of comb-filtering effect(the highs and lows speaker are in the center of the body not like NS10 which have the highs speaker at an offset), it is even explicitly written in manual to use it in upright position. Also never use white noise to calibrate speakers because it is impossible to set the low end at correct volume, use pink noise instead which is compensated for the inequalities of the white noise. For a room of a medium size the yamahas HS7 with a HS8s is more than enough you don't need the HS8 which according to my experience are overpowered for 99% users and not so precise in the mid range. Mine surround system is calibrated on cinema standard 85dbs and the HS7 are not even at 1/4 of their volume. For the sides I use HS5, they have lower power and still I have them at 1/3 of max volume adn they mix very well with the HS7s and the sub. I also use phantom center channel(sending center channel to both left and right speaker), it is an ideal solution if you always sit at the listening position and dont have space for center speaker. Remember the center channel was designed mostly for dialogs in large theaters where phantom center is impossible to achieve because you always sit too left or too right. I dont feel there is much difference in clarity compared to having a true center channel.

Your question has a false premise and a misunderstanding: a phantom center only applies to sound over speakers and binaural only applies to headphones. So a phantom center (by definition this is a sound-source which appears in front of the listener) is not heard in headphones and binaural played over speakers is improper because you cannot introduce speaker cross-talk into a binaural signal. Also, you are actually only rendering 2.0 stereo in your video, not binaural. True binaural must have a spherical harmonics, HRTF applied or you simply have 2.0 stereo.

Once again, Leo you explain your methods, that make this ole' dog, still feel more enlighted into todays digital world!

Thanks for the vid! There is also a setting for send pan called ‘send pan follows panner’ so it follows the channel pan

Thanks for the video. What Interface are you using for Dolby Atmos?

Atmos is a dead parrot.

THANKS

Awesome!

Organic, thanks a lot

Excellent Video with a handful advice from a Legendary mind.!!

Thank you

Was searching for how to do this for the last couple of days and finally found your very in-depth video. Thanks for sharing all of this information.

The Fire Tv Stick doesn't work for me. Tried Amazon Music Unlimited but no atmos (even if its supposed to be). Tried Apple Music with Alexa Skill, only stereo. Kind of desperate. Any alternatives?

So how is that receiver talking to your DAW on your computer? Dante or madi?

You are a genius. Thanks for sharing!!!

can you export stems of different widths eg. 5.1, 7.1, stereo etc as well as stems like Dialogue only 7.1.4 or Music only stem at 7.1.4 re-renders. I am able to do that with external Atmos renderer but I am not seeing those options in the built in Nuendo Atmos renderer?

sound quality.... dont even talk about it,,,huh

Hi! I've seen you didn't make videos in a while, but let me tell you did an awesome job. You teach a lot of great and creative audio information. You inspired me and I believe you inspired a lot of viewers on UA-cam and when the met you in person at your studio. Thanks, for giving us such incredible videos and whether you are not a using mac based sistem you still have a lot to teach us.

Hi! I've seen you didn't make videos in a while, but let me tell you did an awesome job. You teach a lot of great and creative audio information. You inspired me and I believe you inspired a lot of viewers on UA-cam and when the met you in person at your studio. Thanks, for giving us such incredible videos and whether you are not a using mac based sistem you still have a lot to teach us.

Binaural not should be used......is really terrible, HRTF not is ok.

You are the person who I have been looking for. You are a thinker, you are a doer, you think outside the box and after watching over 300 Atmos videos, I just discovered your channel. Thank you so much !. Liked and Subscribed! Please keep on the topic of speaker placement.

Hi, Leo. I didn’t understand if you actually needed the decoder for using your audio interface or if you can just use a 6 output channels interface instead with your DAW. By the way, this is the best video I found about this issue. Thank you!

Wow, very interesting and useful video...excellent

This is truly inspiring! I'm in the midst of planning my own affordable Atmos room at my home studio and your videos make me believe it is actually possible without breaking the bank! :)

is mac studio good for atmos mixing mastering?? and what configuration u suggest for atmos music mixing ??

is mac studio good for atmos mixing mastering?? and what configuration u suggest for atmos music mixing ??

Thank you so much for that incredibly helpful video! Absolutely fantastic!!! 👍👍👍

Hello, I’m late to the party however, my problem with importing Dolby Atmos files is I can’t hear any audio. I’m using Cubase 12 pro, I use the set up assistant before I open file and the only way I can hear the files are in stereo and not 7.4.1. Also I tested opening files in other daws I have and they play with no problem. Cubase is a real head scratcher.

Thanks for the tips... it really helps. but it sounds out of phase if mixing in stereo mode , when sum in mono to check... any solution?

By the way the new Apple update let you listen to music from Apple Music at 714

I did using ur way still caused a lot 😂

Hey hope you are doing well! Im in my journey to create my test atmos environment, i start researching a lot and i end in your channel!, finally some one is sharing great stuff on practical things we can deploy to test the waters without going for a second mortgage ;) At this moment im digging in my old stuff getting all the components for my own Frankenstein Atmos rig project! BTW your setup looks cool. Thank you a lot for all the information, it really help me. BTW my idea is to explore Atmos prod and mix for hiphop, trap and "Latin Urban" music, in particular creating remixes for Immersive video clips and youtube visualizers, they are so popular in those genres. Best Regards from Santiago Chile!

8:12 Emotiva BasX MC1 13.2 is also a good choice it's based on this tonewinner unit but only does 13.2 channels of processing which is fine for a 7.1.4 set up and is only $1,099