- 13
- 156 168
Holleyoffroad
United States
Приєднався 16 лют 2021
this channel is for people who want to fix their four-wheeler/side by side and for those who are just looking to grow in their ATV knowledge.
How to fix bowed siding
What should you do if you find yourself in a bad spot with a poorly done siding job? this video will show you the best way I have found to solve the issue.
Переглядів: 982
Відео
how to install the joystick and hydrolic hook ups for a grapple on a 2022 Mahindra 1640
Переглядів 341Рік тому
Hello fellow mahindra owners, if your looking to install a grapple this is the video for you. In this video Michael will give you an in depth but brief run down of the installation process from his own personal experience so you can avoid the possible obstacles that come with this kind of project.
water pump rebuild on a Honda foreman 500 and Rancher 420 (2007-2017) liquid cooled models
Переглядів 5 тис.Рік тому
this video will give you instructions and tips as well as show you how to rebuild the water pump on a Honda 500 foreman and will also equate to a 2007-2017 Rancher 420 (liquid cooled models) #atv repair
How to clean the master cylinder on a Honda rancher
Переглядів 8082 роки тому
in this video I will show you the fastest and easiest way that I have found to clean a master cylinder. Link to full video: ua-cam.com/video/ouVEBXFjx_8/v-deo.html Music provided by: Vlog No Copyright Music Link to Vlog No Copyright Music channel: ua-cam.com/users/VlogNoCopyrightMusicfeatured Song featured in this video: Song: Ikson - All Night
how to fix a stripped screw
Переглядів 822 роки тому
#shorts Link to full video: ua-cam.com/video/W11B3OvB6oI/v-deo.html
a little known problem that will cause your four wheeler to die after only running for a few seconds
Переглядів 2812 роки тому
in this video I will show you a lesser known problem that could be the issue with your four wheeler constantly dying after a few seconds of running. Link to full video: ua-cam.com/video/W11B3OvB6oI/v-deo.html
How to take the gas tank out of a four wheeler
Переглядів 31 тис.2 роки тому
in this video I will show you how to take the gas tank out of a four wheeler in the easiest way I have found to do it. Link to full video: ua-cam.com/video/W11B3OvB6oI/v-deo.html Music provided by: Vlog No Copyright Music Link to Vlog No Copyright Music channel: ua-cam.com/users/VlogNoCopyrightMusicfeatured Song featured in this video: Song: MBB - Beach
How to fix frozen breaks on a Honda Rancher
Переглядів 9 тис.2 роки тому
in this video I show you how to clean the master cylinder and how to bleed the breaks. link to song used at the beginning of the video: ua-cam.com/video/ZBA7ZWy0reg/v-deo.html Name of artist: Ikson Song name: All Night
How to clean and rebuild the carburetor in a Yamaha Bear Tracker 250
Переглядів 22 тис.3 роки тому
In this video I rebuilt the carburetor, cleaned the gas tank and replaced the air filter on a Yamaha BearTracker 250. Also you can go check out my Facebook page at: Holley-Off-Road-106423661682029/ Music provided by: Vlog No Copyright Music Link to Vlog No Copyright Music channel: ua-cam.com/users/VlogNoCopyrightMusicfeatured Songs featured in this video: Song 1: MBB - Beach Song 2...
How to fix locked up brakes on a Polaris Razor
Переглядів 8 тис.3 роки тому
In this video I will teach you how to fix a Polaris Razor’s brakes when their locked up. Also go check out my Facebook page at: Holley-Off-Road-106423661682029/
How to replace the carburetor on a Suzuki Ozark 250 (link to carburetor and air filter down below)
Переглядів 20 тис.3 роки тому
In this video, I will show you how to replace both the carburetor and air filter on a Suzuki Ozark 250, I also have tips and tricks to help you along the way. Also go check out my Facebook page at: Holley-Off-Road-106423661682029/ LINK to the carburetor and air filter used in this video: amzn.to/2Vw1SXR
Polaris sportsman 500 gets hot! What to do (thermostat replacement), (link to thermostat below)
Переглядів 58 тис.3 роки тому
In this video I replaced the thermostat in a Polaris sportsman 500 HO. Want to know what to do when a Polaris gets hot, this video contains the answer and much more. also you can go check out my Facebook page at: Holley-Off-Road-106423661682029/ LINK to Thermostat used in this video: amzn.to/3wrIqbu
How do you bleed the air out??
Great video. This helps me a ton. Thank you very much.
Could you please tell me exactly where you got the new carburetor from please any help would be greatly appreciated
Hey man I have ordered several from Amazon, I never get the cheapest one! It’s kind of a gamble with aftermarket carbs but if the reviews are good give it a shot, most of the time they do good but they are not rebuildable in the future
Thank you for that information. You just save me several hundred dollars lol have a good day, sir.
Thank you 🙏 ❤
Your welcome, happy to help
I agree with the comments about this being the best video for a repair. Great job dude. I appreciate it.
Thank you! That really blesses me that I could help you!
Why was the reserve hole in carb eliminated?
yes that's how u do A 4wheeler
Bro you look exactly like a smaller version of my uncle He's 6'9 500 pounds with his full red beard and short hair Everywhere he goes he's in a stained white shirt with jeans
I have a 2002 beartracker an need a complete carb kit. Yamaha wants over 600 dollars for a kit.
Yeah dealer parts are outrageous allot of the time, shindy makes a kit and armor tech does too
Excellent video. You were right about the plastic spacers that go on the metering rod. When checking the one in the rebuild kit, the one that goes bellow the clip was twice the thickness of the stock one. After rebuilding my carb, the machine ran like crap and would only run while choked. I tore it back apart and followed your video. I couldn't find anything I had done wrong until I checked that spacer after you mentioned to use the stock one. I scrounged up the stock one, put it back together and runs like new now. I guess that extra thick spacer in the rebuild kit put the metering rod way too far out of spec. THANKS!
That is awesome! I love helping people solve problems
i know this is a old video but im wondering if you know if a normal style plastic clip will work instead of those cause mine is missing those and i havent really seen any on amazon?
I think they are a little smaller than the replacement ones but you can drill the plastic out a little if you need too
Great video very informative keep it up
Great video, I'm not very mechanically inclined but I not only fixed my carb but actually felt like I understood what I was doing. I found myself narrating in my head like you were which is a sign of a good teacher, kudos to you brother also protip: Like he says, REBUILD the original Mikuni carb. I bought a chinese carb off Amazon for $14 (yes $14 lol) and the main jet was size *145* and all the others were wrong size lol. Cleaned out the Mikuni and my Beartracker runs flawlessly, with the peace of mind that there's no Chinesium shitting it up haha
Thanks man that makes my day! I love teaching!
howdy from TEJAS. good job, have a BT too and 200 acres to roam. love the flag. never give in and MAGA!
You're the Bob Ross of small engine repair 👍thank you so much for helping me stay calm 🙏
Thanks I love watching bob Ross late at night, if you can keep your cool when a job is giving you trouble you will win!
Great video I'm about to do mine never done breaks on a quad before. I have one question did I see that right left hand threads on adjusters on the right side and right hand threads on the left side?
Yes I believe so it has been awhile since I have done one and I am thinking that is right.
When you take it apart lay it down exactly the way you took it apart so you won’t get the pieces mixed up.
How did you get the spring seal on the shaft? Thnks
I honestly can’t remember because it has been so long since I done one. I apologize if I can remember I will let you know.
@@holleyoff-road3554 Hello, I'd like to know too, I'm on the process of replacing the water pump, impeller and seal. Waiting for them to come in.
Great video! The float level was throwing me off cause of the bowl being off level with the throat of it. Helped me out. Thanks!
Glad it helped!
Thank you! This is most useful 👌
Glad it was helpful! Your Welcome!
This dude is awesom. I just bought a second Mikuni and just cleaned it as best I can, why do I say as best?because I've hammered the flot pin quite a bit but she wont move! Don't know what the previous owner did looked like he knocked it flat or something 😡. I'll get myself a carb kit later, anyhow I've put the carb on and she idle fine. Start up immediately. Luckily it has a 95 main and 42 pilot jet in. My only issue is my current throttle can't feed far enough so I'll get the original cable soon. Thanks again for your informative videos I like it. Many blessings for your channel! 🙏
Thanks!
Aren't there two sections that need to be pushed out? 2 spring 2 rod/busing assemblies. I pushed mine out using a grease gun and a zerk. But it appears another is down in there.....?
I apologize I don’t remember it has been about 3 yrs since I had one apart but I believe it was just one of each on the little rzr
I bought a Mikuni carb kit for ours and the diaphram for the throttle was too big in diameter. Lovely
Very nice!
Thanks big help with changing my 2002 400 Sportsman thermo
Your welcome glad I could help
Thanks for this tip!
What a great instructional video, plenty of information relevant to each task and great footage to show what you are explaining. Resurrecting my old 1999 Bear Tracker that has sitting for months. Starter isn't working and thought I'd better clean the carby. Confidant I can put a new carby kit in it now, thanks. Will have to order a new starter as its getting power but nothing. Thanks again for the video hopefully you'll do more.
Thank you for the encouraging words! I’m building a new house and shop so I haven’t made videos in a while but when I get the new shop done we plan to make allot more, have a blessed day! And if you test everything and you have fire at the starter but it doesn’t crank over you can hold the start button and tap the starter and if it tries to crank over then it’s definitely the starter brushes worn out
Thanks for the info buddy
What kind of grease is that red grease you are using?
It’s just valvoline wheel bearing grease, it has a high amount of tackafier, that makes it hold in place better and it’s real stringy
F me, 20 min later, and finally taking the carb off. Use playback speed x2, and his voice aint so bad, lol
Hey I think I have a beautiful southern man red neck voice! Thanks for reassuring me of that! 😁 Have a blessed day man
We just rebuilt the water pump on a 2003 sportsman 400. Freaking AWFUL! Spring loaded device was seized into housing. Took me 2 hours to get it out
Oh yeah they kinda suck, I replaced one in a Honda foreman 500 that fried my nerves!
Awesome instructional video. Do you have a video on how to stop the front wheels from screeching while rolling?
It depends on if you have disc brakes or dry brakes on the front but definitely the master cylinder not releasing because of the little hole inside of it is likely the cause
Do you have to disconnect that hose from the joint seems like you can unscrew it whole
Yeah you can do it either way it’s just easier to clean the thermostat housing with it off
Thanks for this video. Very helpful.
Your welcome glad to help!
Did you ever make a video on the rear brakes? My brake pedal is stuck down on an 05 Rancher. Awesome video. Great info.
When the pedal is frozen you have to remove the pedal from the shaft, which normally requires heat and some sort of puller (because it is so hard to take off). After that you have to clean up the shaft, there should be two grease seals in the pedal, they’ll need replaced. Then grease it all really well before putting it back together. This should have you good to go. Thank you for the comment and for complimenting the video.
Thank you very much for the video! I would have had to take the rzr in without this video. Fixed our master cylinder!
Hey that’s awesome! Thank you for letting me know, I love helping people learn how to fix things on their own, thanks for being a blessing
The carburetor I bought has a small hole on the bottom beside the ide speed adjustment screw.
I apologize I’m not sure because some aftermarket carbs are different than factory carbs, does it run bad?
@@holleyoff-road3554 I guess it doesn’t matter it run fine so I don’t know what it for
@@holleyoff-road3554 thank you
hola compañero podrías poner el enlace donde comprar el kit de carburación?gracias
I get mine from a parts supply wholesaler and I’m not set up to sell online yet but if you go with an armor tech or a shindy brand they are both good ones.
Gran aporte amigo.....muchas gracias.
This has to be the best video on a mechanical repair service. At 73 years of age I watched this video a number of times before attempting but everything went great. It did take me half a day but was well worth it. I give it a 10 plus stars
great video! would you have any videos or instructions to replace the oil seal from the shift shaft. (SD 12-22-5 HS) part
Hey I’m so sorry it took so long to get back to you. I like to use a paint can opener, it is kinda like a flat screw driver with a bent tip on it, you can just angle it and slip it up inside the seal and normally pull it straight out or use a screwdriver to pry it straight out, then clean the shaft from any debri, I like to use a scotch Brit’s pad before putting the new seal in, get a deep well socket that fits the outer diameter of the seal exactly and use that to drive it in with a little hammer
Just replaced mine along with you. Runs great! Thanks 🙏
hey man I have a huge problem 2002 ozark 250. new carb i installed it just like you did in the video. the atv wont run unless it’s on prime or i spray starting fluid then in just dies out. I loosed the fuel drain screw and fuel comes out so I know the carb has gas in it. can you help at all?
If the float valve is working correctly then when you loosen the drain screw it will flow out in a stream if it’s on prime, if a little comes out and it stop dripping then your float likely is not opening enough or is stuck shut, so if this is the case tap the side of the bowl with a screw driver or something and see if fuel starts to flow better, sometimes tapping it will make the float shake loose and work right, bottom line is if it runs on starting fluid it’s not getting fuel
@@holleyoff-road3554 I opened the carb back up and the float works perfect. Also i tapped it and no change. i just got it started by pulling the throttle cable then it ran pretty good. I put the throttle cable back to normal and it was idling nice. then i give it gas and it stalls, right after i tried to start it again and now it won’t. do you think it could maybe be i need bigger jets? I live in NM so it’s high altitude
Where can I get the parts list?
Hey Man I apologize that I am just now getting back to you. My carburetor kits come from a supplier but you should be able to find a shindy brand carb kit on Amazon. The cheap carb kits are sometimes not good and the name brand carb kits work better.
@@holleyoff-road3554 BTW, excellent video!
This is hands down the best, most in depth video out. I wish I would have seen it a few years ago. Bought my 2005 Ozark and had hell figuring it out,due to it coming with the wrong carb. Again, this is absolutely the best vid for helping someone with one of these. This is definitely a great channel to be subbed to.
does the jets and mixture screws come already installed ? because theyre extra ones in the packet .
Yeah sometimes when you buy an aftermarket carb they come with extra jets because if you live in Florida at low elevation you will have different jet requirements than if you lived in the mountains at high elevation, but normally the one that comes in it works fine
@@holleyoff-road3554 ok , thanks for the Info .
Loved this.
Wonderful instructions; 60$ amazon replacement carb arrives in few days. I'm going to try and reuse the old choke tip gizmo.
Hey thanks for the good feedback! Sometimes the new carb will have a new choke tip with it that may fit different than the original just look at them closely to be sure they are the same, you got this!
Just got around to removing Ozark 250 carb and I foolishly drained fuel tank thinking for safety i had too. But in doing so, I forgot that newer style fuel petcock is vacumn operated ! So I freaked out, thinking no fuel draining meant broke petcock. Anyway, I'm calm now used prime petcock setting setting to drain tank. I'll never do that again as with no vacumn, no fuel flow. New choke pin was already sitting in new carb with its spring which was smaller diameter than factory choke spring. Took me 20 mins to attach new choke spring to new choke pin. Having much difficulty getting new carb intake onto manifold intake boot, might have to used dremel to increase boot opening.
could you just pull the gas line off carburetor and then turn fuel on if I just wanted to drain the fuel?
Yes, turn it on reserve and it will get more out but it won’t drain it all out and if there is water in the tank it won’t get it all out, the rag on the flexible grabber will get it out though
Thanks.
Thank you, just got it done while watching your video.
Hey I’m happy to help