Відео

So would this happen after a wreck?

Finally a video that make sense... UA-cam is art...it's not for the common sheep. Fuck me all the other videos made me wanna pull my hair out. 10 minutes long for fuck sakes. Stupid fucking people... Ughh Thank you for your video pal this helped alot

My belt had two issues. One was the drivers belt had a VERY WEAK retraction. I'd get out at a store and returning that belt would be hanging below the bottom of a closed door. The other issue was the seat belt warning light was illuminated, My scanner showed pre-tensioner, open circuit, drivers seat. I sent the belt to Safety Restore with a typed note asking if they could also tighten the retraction spring. I also sent an email asking the same and their reply was YES they could fix that too. I got it back and the belts warning light was still on (Yes I did a belt system reset) AND the belt still hung out the bottom of the door if I didn't remember to work it back in before closing it. I contacted them saying I understood the cause of the illuminated warning light could be something elsewhere BUT the belt retraction was a different animal and that hadn't changed one bit. Sent it back, on them, and they returned the belt days later, on them again, and THE RETRACTION WAS WORSE THEN EVER acting like a turn or three had been TAKEN OUT of the retraction spring. I appreciate that they agreed to try it again AND for covering shipping cost both ways the second time but the belt retraction is pretty much mechanical and even that wasn't repaired and as I said, was even weaker after the second "fix." Not running safety restore down and I've used them I believe twice in the past with great results and recommended them to a could of friends but this time I'm VERY disappointed in the results. What makes my problem worse is Nissan no longer sells a replacement belt. It's a 2006 Titan and one from a salvage yard will likely have a lot of usage on it too.

This video should be banned from Ebay. I'm appalled. Guessing Im going to be arrested and sentence me to years in prison for working on vehicles!!!😂😂😂😂 The OP talks about scams when in fact he is scamming peopl. A misleading title for clicks and scare tactics and indulting the public all to make a sales pitch.😂😂😂😂 To the OP..... You really should rethink things because this video tremendously hurt your bottom line. You lost far more potential sales than you wouldve hained had you been positive instead of deceitful. Also this video could've been made no more than 2 to 2.5 minutes long max instead if a near 10 min sermon insulting people with negativity. The title could've been made without deceit. Something like. "Seatbelts should only ever be repaired except by legally authorized services" "Heres Why" Then state that only an authorized service can give you a legal guarantee of a proper repair and safety. Then explain that attempting repairs on your own or with an unauthorized company could result in bad consequences if the repair isn't done properly so proceed with extreme caution if you insist on repairing seat belts yourself or using unauthorized services. Thats all you really needed and you could've still pointed out your own company as an option.

2011 infinity fx35 passenger seat belt jammed

3:00 That's actually an open circuit read, not zero ohms (which would indicate short circuit).

You helped a lot. Thank you

this is a fucking advertisement lmfaooo

Thank you sir i was angry now all is ok

Only promoting👎

Best video thanks brother

You are doing advertising to the company

You work for them

Gee golly thanks🙄

You just advertise not explain how to be fixed after car accident

I have an ohm reading of 2.3 to 2.7 it keeps fluctuateing on the scan tool the air bag light is on .it's 2012 f150 .passenger side retraction deploy

2:32 "Let's just say I'm speaking from experience" 😂😂😂😂

Cheap way to advertise

i need your help please give your contact number

Waste of time. Straight up ad!

No idea why this video has so many dislikes. The angle tip definitely was my issue. I thought my seatbelts I got from the junkyard were bad bet they work perfect. Thank you!

soooo if my car is flipped over ill be trapped?

Great video I got another belt and thought it was locked up and u got right to the point didn’t know it had to be straight up and down thanks for the help

The Module could be bad. Most likely need to replace the Module. You can buy a used one on www.eBay.com or send your Module for repair at www.myairbags.com Here is video ua-cam.com/video/_gDA43wiZ44/v-deo.html

cThe Module could be bad. Most likely need to replace the Module. You can buy a used one on www.eBay.com or send your Module for repair at www.myairbags.com Here is video ua-cam.com/video/xT5tiT2A78w/v-deo.html

ls The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video www.myairbags.com/product-category/repair-return/seat-belt-repair/

Hi The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video www.myairbags.com/product-category/repair-return/seat-belt-repair/

Hi The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video www.myairbags.com/product-category/repair-return/seat-belt-repair/

The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video www.myairbags.com/product-category/repair-return/seat-belt-repair/

The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video www.myairbags.com/product-category/repair-return/seat-belt-repair/

Hi The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video ua-cam.com/video/xT5tiT2A78w/v-deo.html

Hi The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video ua-cam.com/video/xT5tiT2A78w/v-deo.html

Hi The pyro sensor in the seat belt pretensioner could be bad. Most likely need to replace the seat belt pretensioner. You can buy a used one on www.eBay.com or send your seat belt for repair at www.myairbags.com Here is Video ua-cam.com/video/xT5tiT2A78w/v-deo.html

Wow!! So, this is just a 7-minute advertisement. 😶😶

Only video on UA-cam that helped me... props to you man! Life saver. Saved me tons of time

Change the name of the video, don't waste our time, looser

I just have my seatbelt and SRS module fixed from safetyRestore. Seatbelt doesn't retract like the original and makes noise. I haven't plugged in the SRS module hopefully it works.

Never use a multimeter to probe those wires. That can cause an unexplored charge to go off.

Great job asshole.

What a waste of a video.

about $100 at the dealer. your recomendable safetystore.com charges $64 to fix your used one. I prefer the price for the new.

The video does help and you are working for the company, there are many ways how to repair but you want to keep it secret for your company

well, this was a completely useless video

you owe me 5 mins.

What an idiot

Trash video

are people that dumb that they don't realize that the seat belt was sent in to be rebuilt, or am I missing something with the amount of dislikes on this video.?

THIS VIDEO IS AN ADVERTISEMENT, NOT A GUIDE. Most of you probably have seatbelts stuck in reverse lock. Here's the solution: 1. Hold the seatbelt retractor between your legs in the EXACT same orientation as it is on the car (as close as you can get it) 2. Wind the seatbelt back 1/2" -3/4" 3. Gently pull the seatbelt back up, making sure that the belt exits the retractor at the same angle it would when installed on the car. 4. If it locks, back it up 1/2" - 3/4" and try again. You may have not gotten the orientation right. 5. When you pull it out all the way, use a clip to keep it from retracting back or loosely tie a knot in it to prevent it from retracting all the way again. (Obviously don't install your seatbelt with a knot in it). There. 5 steps. I fixed 3 junkyard seatbelts this way. Was that so hard, Gavin?

Life saver I was finna get a new one

Waste of time!