J Swoozy
J Swoozy
  • 4
  • 262 171
2020 25hp Yamaha on 1650 Lowe Roughneck
Hey everyone, here’s a quick video of the new Yamaha 25 set up on a 1650 Lowe roughneck. Also, gave an idea of the stability of this boat. Thanks for watching!
Переглядів: 76 444

Відео

*Updated* Tracker Grizzly, TH Marine Mini Jacker, 20hp Mercury Outboard
Переглядів 33 тис.5 років тому
Here’s an updated video of my boat. I raised the TH marine mini jacker up another inch and put a 12p prop on it. Hope you guys enjoy it. Any questions, feel free to comment. Thanks!
2013 20hp Mercury 4-Stroke on 1648 Tracker Grizzly
Переглядів 61 тис.5 років тому
Here is a video of my boat setup. Runs 25mph consistently with an 11p prop. Going to have to go to a 12p because it still revs too high. Boat weighs 500lbs dry. As long as it’s setup correctly, this is a great hp motor for this boat. Thanks for watching!
2019 20hp Tohatsu on 1648 Tracker Grizzly
Переглядів 92 тис.5 років тому
This is a short clip of the motor during the break in period. Tops out at 26mph. Now that’s it’s broken in, at the right trim setting I can get 27mph consistently by myself and 25mph with me and one other person. Over revved a 10&11 pitch prop. Running a 12 pitch prop now and runs perfectly. This little motor has got insane amounts of power. Thanks for watching.

КОМЕНТАРІ

  • @laurentlobell7624
    @laurentlobell7624 Місяць тому

    How much

  • @timburton9514
    @timburton9514 Місяць тому

    Sounds just like my Suzuki 25

  • @krowbar23
    @krowbar23 3 місяці тому

    It's needs a 50 hp Merc on it.

  • @Kabezoutfishing79
    @Kabezoutfishing79 4 місяці тому

    My question is where do i knlwnwhere to start when i install ?

  • @davidaguiar1387
    @davidaguiar1387 5 місяців тому

    The new Tohatsu/Mercury portables are amazing. I've got a 2023 20 hp and it is identical to the 9.9 hp with the exception of the computer. ( Both weighing in at just under 100#) They aren't cheap but well worth it. Thanks for the tips on the prop.

  • @tieoneon1614
    @tieoneon1614 5 місяців тому

    Nice rig. Perfect cavitation height, and perfect rpm for top speed.

  • @knightcustombuilds6988
    @knightcustombuilds6988 6 місяців тому

    25" 25hp tohatsu on a 1519 Duracraft running 38mph. Jack plate way up to get the cavitation just right. I haven't run any 4 strokes yet. I cant make the switch. #MIXEDGAS4LIFE

  • @jamesthompson7425
    @jamesthompson7425 Рік тому

    I have the 1860, with a 90 Yamaha 4 stroke and I love it. When it starts proposing I'll add half a tank of water to the front live well and it pretty much levels out nicely and I didn't have to buy anything for it, give it a try before you spend any money

  • @tcb069
    @tcb069 Рік тому

    i have a 1977 loweline [i believe hustler model] which weighs 385 per specs, do you think 25 or 30hp would be best

  • @terrymunn1224
    @terrymunn1224 Рік тому

    I am in the process of buting a used 1760 xpress all welded jon and am wondering if a 2009 50 hp yamaha would be enough power for it another guy , dog and duck hunting gear.Thanks

  • @KingdomEvangelism
    @KingdomEvangelism Рік тому

    What’s the price for a boat like this?

  • @davidportelli8701
    @davidportelli8701 Рік тому

    I have a 4 stroke Tohatsu and when I accelerate I am finding the steering (handle) to be quite hard to handle amd truly difficult. My arm end up hurting after a while. Any recommendations?

    • @ki4ksy
      @ki4ksy Рік тому

      If that motor has a trim tab/fin by the prop you can adjust it to counteract the force and make the motor much easier to drive.

  • @davesohns1
    @davesohns1 Рік тому

    Interested in getting this boat to pair with my current F25. What is your top end speed?

  • @snoppy78
    @snoppy78 Рік тому

    Where did you originally have it set flush with the transom?

  • @larrywhite7124
    @larrywhite7124 Рік тому

    How much for that set up and where around Farmington Mo can you get it

  • @kevinloper6551
    @kevinloper6551 Рік тому

    I got a question, does your trailer have a swing away tung on it? I've got only 18' in my garage and can't get any information on the length of boat on trailer with motor.

    • @sharonbraselton4302
      @sharonbraselton4302 Рік тому

      buy whaler 15 rage whaler 18 rage jet drive invmborde zero outbard extra room

  • @BlackWarriorLures
    @BlackWarriorLures 2 роки тому

    Runnin'!

  • @greglilard1826
    @greglilard1826 2 роки тому

    How much did your boat, motor, and trailer cost ?

  • @UpstateLiving315
    @UpstateLiving315 2 роки тому

    Have an old flat bottom Jon boat with a 12 inch transom. Would this mini jacker allow me to use a short shaft outboard?

  • @karpik1997
    @karpik1997 2 роки тому

    hi, tell me, is tohatsu outboards 4T oil good?

  • @wadepittenger5661
    @wadepittenger5661 2 роки тому

    The kill switch cord is useless dangling there not attached to your wrist or other place on body. Hope you are not sliced up by prop in an unfortunate overboard incident

  • @davidgray9292
    @davidgray9292 2 роки тому

    Going to pick up a 25 tohatsu i ordered for mine,it's a 1652 south fork rated for a 50,had a 30 merc on it and it would fly,hopefully it'll still do good.

  • @TheBudgetSportsman
    @TheBudgetSportsman 2 роки тому

    This looks like my dream setup, but boy oh boy for such a simple setup a boat and motor like that gets pricey fast.

  • @haroldpowers6108
    @haroldpowers6108 2 роки тому

    Good video I have a Yamaha f25 on a lowe roughneck 1860 and it does very well I get 23 mph by myself and 21 with 2 people if I run into a strong head wind it slow me down a little but I can fish and run all day on 3 gal of fuel I have 114 hrs on it so far I have really enjoyed it so far ,I will probably put another 75 to 100 hrs on it in the next 3months.

  • @coryboyd7958
    @coryboyd7958 2 роки тому

    Now if I could only find one!

  • @andrewlee1321
    @andrewlee1321 2 роки тому

    How on earth do I make my 1448 run that good. Exact same freaking motor and I can’t get it to plane or go over 15 mph

    • @jaysonsetzer2287
      @jaysonsetzer2287 2 роки тому

      Engine may have the wrong prop on it, could be trimmed wrong, or the wrong shaft length for your boat. If you bought it new the dealer should be able to fix it.

    • @ericpigg2689
      @ericpigg2689 Рік тому

      Did you ever figure out? That 1448 should scream with that motor. I run a 1996 Evinrude 15 hp at the moment on my 1448 and it will push it about 21mph. Thats with all my gear and my 300lb self on board.

  • @OO-is9wn
    @OO-is9wn 2 роки тому

    Thoughts on this motor a year later? I'm starting to research Merc, Yamaha and Suzuki 25 hp four stroke. I'm leaning towards this model. In reviews the one con I hear the most is the vibration in the handle.

  • @paulpearson5283
    @paulpearson5283 2 роки тому

    What kind of weight do you have in your boat to get 26 mhp

    • @jswoozy517
      @jswoozy517 2 роки тому

      Maybe 250-300lbs total. Just me, trolling motor, battery and tackle boxes. The key is weight distribution and the right height for the motor. Keeping the battery up front helps a lot.

  • @truongnguyen-qw8uj
    @truongnguyen-qw8uj 2 роки тому

    What’s your top speed by yourself or with another person with this motor? I have the same motor but just two years older than yours

    • @jswoozy517
      @jswoozy517 2 роки тому

      By myself I was able to stay at 26mph top speed with another person was 24/25.

  • @POPO123418
    @POPO123418 2 роки тому

    Hey is your Mercury a long or short shaft?

  • @karpik1997
    @karpik1997 2 роки тому

    hello, please tell me which oil in your opinion is better: Tohatsu Outboard 4-Stroke 10W-40 Oil vs MOTUL Outboard Tech 4T 10W-40? What is the oil in your engine?

  • @centralbears3010
    @centralbears3010 3 роки тому

    Great vidya. Where should the prop be with respect to the bottom of the boat in order to pick up cooling water and push the boat? ot a side view with recommended angle? Is a 16/52 is the best size for fishing 2 people comfortably? Small lakes.

    • @centralbears3010
      @centralbears3010 3 роки тому

      Early morning typing blues. GEEEEZZZZZ. Is a 16/52 the most optimal size boat for 2 people in small lakes? Your opinion? Best place to buy a yamaha?

    • @Chafer88
      @Chafer88 2 роки тому

      @@centralbears3010 I have a 1652 G3 Jon boat they are crazy stable. As far as Jon's go 16' is great for two people. I bought it especially for being able to take my dad or someone else out to the lakes with me.

  • @centralbears3010
    @centralbears3010 3 роки тому

    Perfect Video. Thats what I plan to buy. 1654 tracker with a 25 HP YAMAHA. I have research them all and I think this set up is best for fishing any lake with a children.

  • @shooten1st
    @shooten1st 3 роки тому

    Hydrofoil is great to keep the bow down and plane fast. Putting on my new 21’ 25 hp Yamaha.

  • @NoSkunkGang
    @NoSkunkGang 3 роки тому

    Did the mini jacker come with the green board you have on it or you put that on?

    • @jswoozy517
      @jswoozy517 3 роки тому

      It comes with it. It is just a regular plywood board. I painted it with green oil based enamel to seal it.

  • @rileydewitt8878
    @rileydewitt8878 3 роки тому

    If you trimmed it up a bit with the pin you could probably throw a little rooster😂😂

  • @paullam007
    @paullam007 3 роки тому

    Hey man, you should really attach the kill cord. It's really dangerous if you get thrown off the boat.

    • @deanr.johansen6377
      @deanr.johansen6377 Рік тому

      How many boats have you seen throw someone overboard? Yea, the Jujitsu myth. Can it happen? Add alcohol and stir and idiots happen. Why don't we add seatbelts too. Then it would be even safer. You couldn't get thrown overboard, unless the entire seat assembly was thrown.

    • @Wakawakawaka540
      @Wakawakawaka540 26 днів тому

      No actually , I’m lucky to be here. Bad weather in Back Bay in Virginia I hit a submerged piling and threw the boat sideways and out I went. I swam to a marsh island freezing cold. Luckily two guys on the other side saw my boat and started looking for me. Life jacket and kill switch mandatory now.

  • @sethmclendon3645
    @sethmclendon3645 3 роки тому

    How much speed did you gain ? I’ve got the same set up just a side console

  • @steveking8548
    @steveking8548 3 роки тому

    Really, really good video! But I'll never understand why folks have kill switches and don't use them?

  • @The_Great_White
    @The_Great_White 3 роки тому

    I have to get more familiar with where the propeller suppose to meet the transom. My boat does have a jackplate also but I was wanting the best performance I can get while also able to go shallow

  • @pawcrawlowens8730
    @pawcrawlowens8730 3 роки тому

    I have a 1654 lowe riveted 1992 and it's by far my favorite, I'm old and have had many, I also have a 1448 sea ark riveted, it's me and my wife's personal fishing boat,

  • @Carnivorefitness2024
    @Carnivorefitness2024 3 роки тому

    short shaft?

  • @johnsedler3647
    @johnsedler3647 3 роки тому

    What size is the prop dia.thx

    • @jswoozy517
      @jswoozy517 3 роки тому

      I don’t have this boat anymore but it was whatever the stock prop size is for that motor when it is sold.

  • @vikingsmb
    @vikingsmb 3 роки тому

    attach the kill cord to you not to itself, its there for a reason, to kill the engine if you go overboard.

  • @EdStaniszewski
    @EdStaniszewski 3 роки тому

    I have a Tracker grizzly 1754. I just bought a 2021 Mercury 20hp efi motor. This is the first outboard ive ever owned. I was about to drill holes in the transom then decided to do more research. The dealer said i should permanently mount the motor so theres no chance of losing it. The cavitation plate is about 1/4" higher than the bottom of the boat. Do you think i should do some test runs first before i drill? I have to break it in 2hrs with no full throttle, just puttin' around. Then 8 hrs with very limited full throtttle to reach the 10hrs break in period.

    • @jswoozy517
      @jswoozy517 3 роки тому

      Yes, I would test it before you drill holes. Just make sure it is clamped good with a lock or something through the clamps to prevent it coming off.

    • @johnalvarado1337
      @johnalvarado1337 2 роки тому

      How did your 1754 perform with a 20? I was thinking of getting a 1648 with a 20 or a 1754 with a 30

    • @EdStaniszewski
      @EdStaniszewski 2 роки тому

      @@johnalvarado1337 its kind of a dog, only hitting 12-15 full throttle with 2 men and full load, but thats ok with me!

    • @johnalvarado1337
      @johnalvarado1337 2 роки тому

      Thanks for the feedback, as long as it gets you there! I ended up getting a 1648 grizzly with a 25hp Yamaha. Going to install a permatrim hydrofoil and either this mini jacker or an on the fly jack plate to run as shallow as possible

  • @Mike-ew9zn
    @Mike-ew9zn 3 роки тому

    Why does everyone talk about speed? Faster one goes the more damage is done when one hits something!

  • @bobgutowski3153
    @bobgutowski3153 3 роки тому

    hey good morning just Saw your video on the low roughnecks 1650 how stable is that in rough water have you had it out and rougher water just curious I’m looking at a low roughneck 1660 right now

  • @JLO47
    @JLO47 3 роки тому

    Just one side note: that 20hp Mercury is actually made by Tohatsu, as was the Nissan 20hp (no longer sold by Nissan). That Mercury looks and sounds exactly like my 2008 Nissan 20hp and I know from experience that parts are interchangeable.

    • @countryfriedent
      @countryfriedent 3 роки тому

      Would you happen to know if any outboard parts are interchangable with a NS9.9B2? Mainly the carb and fuel pump

  • @fishingismydrug1
    @fishingismydrug1 3 роки тому

    If your looking at power to weight ratio, get a two-stroke. Had a G3 1756 SC deluxe, full front deck, three batteries, '80's model yamaha 25hp. Would do 23mph just me, 20mph with a another person. Hole shot was wonderful. Miss that boat.

  • @vincentcolon7909
    @vincentcolon7909 3 роки тому

    Love 💘 your videos