- 3
- 43 617
Monson Lock & Key
Приєднався 27 лис 2020
Hello my name is Dylan I own a locksmith company in Nebraska come follow me on my journey of cutting in programming keys for various different customers and vehicles!
Transit Connect Locksmith Van Tour / Kwikset All Keys lost Xhorse XC Mini II
Hello everyone and welcome back to the channel! I know I've been gone for quite some time but I wanted to show you my 2010 Ford Transit Connect Locksmith Van setup. I also wanted to do a demo of the Xhorse Condor XC Mini II doing an all keys lost for a residential Kwikset kw1 keyway on the Xhorse M4 clamp.
Thank you all for watching if you have any questions or comments please comment down below and I will answer any questions you may have.
#xhorse #locksmith #allkeyslost #kwikset #keycutter #xcmini #lishi #lockpicking
Thank you all for watching if you have any questions or comments please comment down below and I will answer any questions you may have.
#xhorse #locksmith #allkeyslost #kwikset #keycutter #xcmini #lishi #lockpicking
Переглядів: 6 424
Відео
2007 Jeep Liberty All Keys Lost Pin Read IM608 Programming
Переглядів 32 тис.3 роки тому
Today I did and all keys lost on an 07 Jeep Liberty. These models use a Pacifica system. There is no possible way to read the pin via OBD on these. I used a cy24 lishi to read the door lock cylinder then cut the key with the Condor Dolphin and then generated the chip with the Key Tool Max. For pin read and programming i used the Autel IM608 pro via the EEPROM chip and then generated a dealer ke...
AUTEL IM608 PRO, GBOX 2, SMART KEY EMULATOR (UNBOXING)
Переглядів 5 тис.3 роки тому
Autel MaxiIM IM608 PRO - the All-In-One Key Programming & Advanced Diagnostics Machine w/ IMKPA Accessories for Renew / Unlock (See Below) With the upgraded key programmer XP400 Pro, the MaxiIM IM608 Pro is the most advanced key programming tool that combines the powerful IMMO and programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touch...
How did you learn all of this stuff? I want to get into it and have extensive automotive experience but not with aftermarket keys. How do you recommend I can learn this part of the trade?
@@halvorsonmx probably people like me join the Facebook groups. I have had friends on there for the past 6 years from all over the world Germany Europe you name it. This video is old and I have learned so much since then just too lazy to upload everything. But I have made a key in all keys lost situation for just about any car. Also module programming for plenty of cars. You just got to dive in and be a sponge and learn everything that you can because it's a lot to take in. I used to go to the junkyard and pull modules from vehicles just to make keys for vehicles that will never run again.
@@monsonlockandkey Awesome thanks for the response. I was considering going to a week long hands on class in Utah but I didn't know if that would be worth the expense or not. I could probably buy some more equipment and head to the junkyard and dive in like you say. Thanks.
@@halvorsonmx pretty much everything you need to know is on this platform they call you UA-cam. I have a good friend the board lock picker that will teach you everything you need to know about lishi tools. And then there are thousands of videos about programming.
I lost the original key to my 2010 Ford transit connect van. How do i get a new key and have it programmed to the van?
hi what walmart work bench is that?
Hi, I enjoy watching your videos. I really appreciate that. I've a quick question. I saw that your youtube cover photo contains maxim products. Which one is you recommend to start this business? I'm planning to buy xhorse full equipment instead of any other brands. What do you think? Will I be safe to work?
Can you tell what the scope/soldering brand is. I want the exact same set up.
Nice 👌👌
Wow! 😮 I took virtually the exact same path as you thru the years. It's a process I guess. Awaiting my 608 and found this video But you got the right s#$! now. 😭
I like your van set up .
Badass job. Id love to see more!!
Were are y from mate?
Brilliant! Well done!
Hey I like your setup. Do you recommend the Xhorse mini plus 2? I’m looking into buying one of those and wanted to know your thoughts about it.
I'm an automotive locksmith since Model T's it seems. lol I had my eye on that machine but I have read nothing but problems with it. Mainly board error issues that never got resolved. How is your experience with it? I believe UHS is an authorized repair center and I am local to them even though I am not a fan of their sell to anyone business practices. I always try to buy elsewhere first. I also have never seen anyone put their workbench in that orientation. Usually it's on a side wall but I am guessing since you have a slider door there you did it that way. One of my guys has the previous model Xhorse no issues and another one of my guys has a Kukai no issues.
Hello, from Ukraine. New video its cool!!!
Hi, thanks for the video. I have been looking out to get one of these vans for mobile works. The way you have partitioned it is really great.
Thanks 👍 Manson for the video
My IM608 pulls the pins on the newer Chryslers
Yes so does mine but not on the older nothing can
Welcome back. Missed ya. Been a viewer since your Jeep akl video. Guess someone had an issue with your set-up. Just looking out for you??? I don't have a set-up like yours. I have it in a Ford Explorer. I have the rear seats folded down and have my Xhorse XC Mini 2 just sitting there. I know it could come flying off in an accident and drive with that in mind. I also use Milwaukee Pack out for storage. Glad your back and looking forward to more from you.
Hey thanks I really appreciate that. Yes I have installed the headache rack to block anything from launching at me in case of accident.
0 safety at all in case you get in accident or you try to do a sudden stop !! Everything will fry over you ! Just saying from my experience- need to separate the tools from the driver with van splitter- plus everything on the side opposed to putting it on the back to decrease the momentum
Yes I recently reinstalled the headache rack just in case of accident.
Good morning, great idea for a car, I live in Poland and I'm looking for an idea for a car. My question is how do you record videos? What camera and how is it mounted?
Yes I recently got an insta360 go 3 very handy I had it clip mounted to my hat. But I can also magnet it to my shirt works awesome!
I tried that today on a 2005. But when I got to the point where you need to load the deta, kept telling wrong data when I selected the one I save.
That's strange you couldn't read the pin or just gave you the wrong data cuz sometimes it will do that like when it did that to me in the video
Hello magical soul! If you're bored with everyday life, watch the latest crime documentary video and get lost in supernatural events. This video will take you to a fantastic world!
Wonder why it showed the first code ..I would sit there and probably try it over and over smh.
Great video. Any chance of you making any more?
Thank you!
How do I program a fob for locks tailgate & panic, my old one broke My key is separate and works fine. 03 Liberty. I'm not paying $200. I'll just use the key a pain but that's to much
You could send me the fob and I can repair it otherwise would need computer to program new fob
Awesome vid my friend 😊
How often do you use the clips to clamp onto the eeproms?I've heard it's a bit hit and miss trying to read them that way?Most people tend to desolder the chips and read them off the board,what's your experience been?Thanks.
sadly this doesn't work any longer if the immobilizer is a #3 version and not a #2. #3's don't have the 8-pin eeprom any longer.
Yeah I don't have to use this method I have a buddy that works at Chrysler that will give me any pin code / key code
@@monsonlockandkeyyou're lucky. I can't get any dealer around me to provide that information. Claim it's "Illegal" to do so. Have to pay some dude in Bulgaria for the info. At least so far it's been valid.
Thanks for the video. It was well made and informative. I subbed.
Does anybody know how many different keys this car can accommodate? How many can be programmed to one vehicle?
Incredibly informative video for a very difficult car. Thanks for the insight you provided!
I made a rodeo 2003 yesterday same procedure 😊
I really liked all the details you provided step by step except the filming in some parts which was not showin what you are doing and the light reflection on the ipad screen.
I have a jeep liberty 2003. Apparently the eeprom there in the skiim is not 85 eeprom.. Could not pull the pin for the car. Anyone knows how you go about that
Great joob ;) What the model of microscope?
What's the charge to custom if u don't mind sir
you can get the pin code from dealer for free
Nice tools !
Thank you for your shared fantastic job !!
what if you need to program a remote head key? just use the pin code and do the programming in the car? Do you know if there is a on board method just for programming the remote?
One more question, what are your thoughts on Launch pad 5 with key programming.
Very well presented, thanks9
Haven't looked into the IM608 but I assume it is possible to clone the chip and write to a new SKIM/SKREEM module in case it is damaged due to theft recovery. Excellent video, keep them coming.
did you get customers first or tools first?
LOVE THE CONTENT. The second you said Pacifica system I shed a small tear. Ughhh the worst. Also what are you using for the memo pad on the door?? Love it. So much better then writing in the dirt on the door haha. Condors usually cut the clamp if you have the key a little to far back. If you push it a little further up even a pinch past the stop line the. Then when it checks for tip position it won’t go far enough back to knock the clamp. Not that it’s a huge deal just annoying and dulls bits
Good video but I wander can't we make all key lost by smart pro or auto propad with out open emobilizar
i'm in Australia so i can't bring my car to you ,but i need to get this done to my car and over here i will need to take out a home loan to pay for it mine is a 2007 kj and my SKREEM/SKIM is a 5wy7627b is this the receiver for the fob/keyless entry too and can they program it the same way
You could mail it to me I can make the key and send it back to you
Where can I find the chips? The same box that you have
www.uhs-hardware.com/collections/new-ch-cloning-chips
Hi guy ! I would like to complete my equipment with a second tablet for programming. I already have the obdstar x300 dp plus and I'm going to take the xhorse condor xc-mini plus 2 for the engraving and customization of the blades. I hesitate between the AUTEL that you presented and the KEY TOOL PLUS PAD from xhorse. can you tell me the advantages of the autel that the xhorse would not have please thanks men !
Autel is much more user friendly with a support team that can log into your programmer and help you with any obstacles you come across. My money would go towards autel every time!