![ClayRepairs](/img/default-banner.jpg)
- 153
- 607 350
ClayRepairs
United States
Приєднався 26 тра 2021
Maintenance, repair and having fun with ATVs, trucks and small engines along with reviewing and testing products.
Sponsors/Brands/Channels: If you would like to sponsor a video or do a collaboration, contact me through me email below :)
Disclaimer:
Under no circumstances will ClayRepairs be responsible or liable for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this UA-cam page whether by ClayRepairs or a third party. I am not a professional. Whatever happens after following the advice in this video is the responsibility of the viewer. All information is taken at the user’s risk.
Sponsors/Brands/Channels: If you would like to sponsor a video or do a collaboration, contact me through me email below :)
Disclaimer:
Under no circumstances will ClayRepairs be responsible or liable for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this UA-cam page whether by ClayRepairs or a third party. I am not a professional. Whatever happens after following the advice in this video is the responsibility of the viewer. All information is taken at the user’s risk.
How to Replace the Timing Chain on '08 yz450f (FULL GUIDE)
How to replace the timing chain and time the engine on a 2008 Yamaha YZ450F.
» Subscribe: ua-cam.com/channels/TT-RJQ2ZLlZRPLq8IGV2HA.html
Music I use:
Song: Jim Yosef - Link [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/Link
Watch: ua-cam.com/video/9iHM6X6uUH8/v-deo.html
#ClayRepairs
Disclaimer:
Under no circumstances will ClayRepairs be responsible or liable for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this youtube page whether by ClayRepairs or a third party. I am not a professional. Whatever happens after following the advice in this video is the responsibility of the viewer. All information is taken at the user’s risk.
» Subscribe: ua-cam.com/channels/TT-RJQ2ZLlZRPLq8IGV2HA.html
Music I use:
Song: Jim Yosef - Link [NCS Release]
Music provided by NoCopyrightSounds
Free Download/Stream: ncs.io/Link
Watch: ua-cam.com/video/9iHM6X6uUH8/v-deo.html
#ClayRepairs
Disclaimer:
Under no circumstances will ClayRepairs be responsible or liable for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this youtube page whether by ClayRepairs or a third party. I am not a professional. Whatever happens after following the advice in this video is the responsibility of the viewer. All information is taken at the user’s risk.
Переглядів: 559
Відео
FOAM CANNONS: High Pressure vs. Garden Hose
Переглядів 2588 місяців тому
Use code: 7JG446XX6HTA for a 10% discount Link: mjjc.com/collections/foam-cannon-s-v3/?ref=222 » Subscribe: ua-cam.com/channels/TT-RJQ2ZLlZRPLq8IGV2HA.html #ClayRepairs #mjjcfoamlance #foamcannon #carcleaning, #cardetailing #carcare #carwash Disclaimer: Under no circumstances will ClayRepairs be responsible or liable for any content, including but not limited to, any errors or omissions in the ...
The Ford Ranger.
Переглядів 1,1 тис.10 місяців тому
pls subscribe guys #ClayRepairs Disclaimer: Under no circumstances will ClayRepairs be responsible or liable for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this youtube page whether by ClayRepairs or a third party. I am not a professional. Whatever happens after foll...
How Bad is this $50 "Train" Horn??
Переглядів 729Рік тому
Air Horn Link: www.oreillyauto.com/detail/c/wolo/lighting electrical/horns/horn universal/e9681b8f9e10/wolo-120-db-air-horn/wlo0/417 » Discord Server: discord.gg/rhtpJ8pEvY » Subscribe: ua-cam.com/channels/TT-RJQ2ZLlZRPLq8IGV2HA.html Music I use: Still Hot by Connor Price & Nic D ua-cam.com/video/POLyaPHTlz4/v-deo.html #ClayRepairs Disclaimer: Under no circumstances will ClayRepairs be responsi...
'04 yz250f EASY Fork Rebuild (Seals & Bushings)
Переглядів 1,5 тис.Рік тому
'04 yz250f EASY Fork Rebuild (Seals & Bushings)
$1400 Yamaha yz250f Has Become a NIGHTMARE... (Can I get it running??)
Переглядів 191Рік тому
$1400 Yamaha yz250f Has Become a NIGHTMARE... (Can I get it running??)
This $1400 YZ250F is hiding something....
Переглядів 379Рік тому
This $1400 YZ250F is hiding something....
A Very Muddy Test Ride + Revamping my Dirt Bike Track!
Переглядів 148Рік тому
A Very Muddy Test Ride Revamping my Dirt Bike Track!
'16 WRX Axle-Back Exhaust Before & After
Переглядів 187Рік тому
'16 WRX Axle-Back Exhaust Before & After
Ultimate Guide to BUDGET Ford Ranger Mods
Переглядів 39 тис.Рік тому
Ultimate Guide to BUDGET Ford Ranger Mods
'75 F-250 EASY Heater Core Replacement
Переглядів 1,1 тис.Рік тому
'75 F-250 EASY Heater Core Replacement
Fixing a Common Coolant leak on my '99 Ranger 3.0 V6 - Timing Cover Gasket Replacement
Переглядів 25 тис.Рік тому
Fixing a Common Coolant leak on my '99 Ranger 3.0 V6 - Timing Cover Gasket Replacement
Easy Spark Plug Change on 2017 VW Passat 1.8T
Переглядів 11 тис.Рік тому
Easy Spark Plug Change on 2017 VW Passat 1.8T
Do This EASY MOD to UPGRADE the Look of Your Truck
Переглядів 99Рік тому
Do This EASY MOD to UPGRADE the Look of Your Truck
How I TRANSFORMED My Truck's Paint on a Budget
Переглядів 83Рік тому
How I TRANSFORMED My Truck's Paint on a Budget
Quad Montage: 2022's Best moments on the Yamaha Warrior 350
Переглядів 154Рік тому
Quad Montage: 2022's Best moments on the Yamaha Warrior 350
FREE FIX! - ATV/Dirt Bike Won't Go into Gear - '97 Yamaha yz125
Переглядів 3,8 тис.Рік тому
FREE FIX! - ATV/Dirt Bike Won't Go into Gear - '97 Yamaha yz125
Separating Brake Drum from Hub on Dana 60 Axle - Ranger Restoration Ep. 7
Переглядів 513Рік тому
Separating Brake Drum from Hub on Dana 60 Axle - Ranger Restoration Ep. 7
Full Top End Engine Rebuild - Yamaha Warrior 350 (Camshaft, Rocker arms, Piston, Valves, Cylinder)
Переглядів 12 тис.Рік тому
Full Top End Engine Rebuild - Yamaha Warrior 350 (Camshaft, Rocker arms, Piston, Valves, Cylinder)
Ford Truck not Starting/Sloppy Shifter Fix!!!
Переглядів 442 роки тому
Ford Truck not Starting/Sloppy Shifter Fix!!!
I Almost RUINED My New U-Joint!! How to Replace Driveshaft U-Joints - Ranger Restoration Ep. 6
Переглядів 562 роки тому
I Almost RUINED My New U-Joint!! How to Replace Driveshaft U-Joints - Ranger Restoration Ep. 6
Attempting to fix my low compression & smoking 😟 Yamaha Warrior 350 Valve Clearance Adjust
Переглядів 1,4 тис.2 роки тому
Attempting to fix my low compression & smoking 😟 Yamaha Warrior 350 Valve Clearance Adjust
Draining My Tranny Because There Might Be Coolant in it -Transmission Fluid Change on 99 Ford Ranger
Переглядів 7 тис.2 роки тому
Draining My Tranny Because There Might Be Coolant in it -Transmission Fluid Change on 99 Ford Ranger
dude great videos love the hype
🛻🔥🔥 cool truck dude keep up the good truck content 😎💪🏾
Great video!! Thank you
I don't understand. What's wrong with it?
I got the cousin 1999 Mazda B3000 Troy Lee
well you don't supposed to carry more than the vehicles curb weight
Is ATF better than Mercon V?
I had one in Gresham, OR tear the sidewall of a tire that got a nail in it (Was a brand new car and only been to the dealership for an oil change/maintenance) Then the tech that worked on it said it was my problem and I would have to buy a new tire. After the manager finally agreed to “do the right thing” I came in and saw him waving the guy to the back quickly and lied and said he sent the guy home. I gave them another chance in Sandy, OR and they charged me $1000 plus to change 2 front struts on a Ford Escort. The struts were crap parts and groaned and moaned immediately, they couldn’t even bother to put my wheel covers back on(left on passenger floor board) and the lugs were so over tightened I needed a 10 ft bar to break loose. Have not given them any more business since.
Did you have water & oil mix?
Yes, after taking off the cover, coolant got into the oil and that’s why I drained the oil afterward
Already straight piped my 02 3.0, I was JUST about to go to the exhaust shop and true dual it, but honestly, i love the sound it makes now, thanks!
How is the drone at cruising speeds with that muffler
Not too bad, but I am a lot more used to it now lol
@@ClayRepairs ok thanks I wanted to do this same setup on my Ranger, last thing I want is to be cruising on street/highway and the sound is annoying and constant
My ranger xlt ,had a concealed leak,previous owner. Had dye test done ,showed nothing fractured, it ended up being a defective timing chain cover,it had a finger nail sized hole in the gasket area,,sitting right beside the top bolt ,it'd get hot ,steam out the hole,drying on the hot engine, before a puddle could form,from the leak,they checked everything but that timing chain cover,I had to purchase a new cover,275.00 dollars, ouch
I tried this and it definitely works I didn't personally hear a difference but I have more power and my truck is more responsive
Not all Chevys are clapped but nice ranger
Thanks 😂
I have the same car but it says 5.8 quarts of oil.. so now I'm confused cuz I only bought 6 of Castrol full synthetic 5w40
Dude just made a hot air intake. Removing the baffle that reduces noise from incoming, turbulent air is good, but keep the "rubber thingy." All that heat soak in the engine bay just raised the intake charge Temps. No.
Did you have to time the truck after this?
As long as you don’t turn the engine over it should stay in time
Where can you get the part
Thank you Chris Fix
I agree they fucked me one tire costed me 280$ they charged me 440$ for the install in total fuck em
Ban this video
Nice.
Is that a crv on the right!!!! Mine is rather impressive for what it is. 05
It's actually a stock Nissan frontier 😂
@@ClayRepairs ahhhh that light looks sooooo close to a crv
Hey man I have an 07 ranger xlt 3 liter v6 my mechanic made a mistake with bolt sizes do you know the length of the bolts for the cover.
That’s so overpriced 😂 I bought a $15 train horn off amazon and it sounds exactly like a semi truck horn, the ones in the video are more like an air horn
I have a 2017 ssr 125 , tore engine down , all gears looks good . Bike wouldn’t go into any gear . Would you think the shift drum could be the issue ?
It could be, hard to know unless you tear it down and take a look though
Put a hitch on a brand new Tesla at U Haul a couple years ago...guy wanted a bike rack for his E-bike.
I did this and did not really notice anything. Until I went to smog and failed. Lucky, I kept everything and put it back to normal. I passed smog after that. 1999 Ford Ranger 3.0 V6 5 speed.
Great job Clay. Add this to the Les Schwab gouge and way. First, I appreciate my local Les Schwab shops, they have doen me right for most of many years for brake work and suspension work. I bought my son an 09 Mazda 5 one year ago, I immediately brought it in for the BS check. The car was very noisy and loose up front, and was unsafe. I was told it needed front control arms and sway bar bushing, and an alignment of course. Got the car back, was better but wheel wasn't centered. Took it back, a bit better. Some 6 months later began hearing horrible squeal from the brakes when in reverse, squeal and grind. Took it back they told me it is the "lack of quality" in the parts, pads aren't the best, rotors are rusty. I noticed rust on the rotors the first day of install. Anyway, they took it back, and within one year turned my new rotors, all new brakes, rotors, calipers, pins, pads, shims, etc. The suspension has been acting up very noisy, took it in, they said "loose front strut bolts on weak aftermarket struts". I got a quote for 2 front KYB Strut Plus assemblies, w install for just over $1100. I was shocked as the parts cost me $135 at Parts Geek, Les Schwab wants $345 per assembly, thus I am fuming with them now. I've brought them well over $10k in business in the last few years. I think they may be a "parts cannon"s scam operation as they never seem to have the staffing and talented, experience mechanics to work on cars. I recommend Les Schwab, but now with much more diligence and research, they tried to scam me for over $500 for this strut replacement, buyer beware.
More responsive 2008 6c 3.0. Will check mileage and post
Will this cause any long term effects to the engine other then the check engine light come on?
Absolutely beautiful ❤❤😂
I did it to mine and now I can do 85 quick and travel through time😂
I need a shop pain I gotta do this in my grass 😂
Mines leaking because some asshat didn’t tighten the bolts 😂
These don’t have belts it has dual chains I thought
You could just put 4 eclipse 12s double stack them trust me that's plenty of bass for the ranger all you got to do is take out the jump seats
How does letting the RTV dry a bit work out with the clearance on the paper gasket? Isn't it going to gap more than the gasket spec? I have tubes of Ford black RTV, but my problem is taking off that Oil Pan it appears since the bottom of it goes right up against the timing cover. Some say this doesn't need to be done if you are careful not to tear the gasket that's in place. Any input would be appreciated.
used to be great, now they thoroughly suck
I will start learning how to change the oil filter on my car and teach others to do the same.
I'll try it on my 4.0 xlt ranger
Clay its me bro
Yo wassup bro! 😂
@@ClayRepairs 😂 nun much also yeah my names different here cause my cousin changed it and never changed it back 😂
@@ClayRepairs also wanted to tell you I'm off of insta for good, got kicked and wouldn't let me back on
Bro 😂 I noticed your messages wouldn't send so I wondered what was up
@@ClayRepairs yeah it sucks but fck insta 😂 they ban for no reason
Hey bro is the exhaust still the same FM super 40?
I think it's the same
How did the eBay rockers and can hold up? You mentioned the bearings were trash?
So far they've held up good, over a year on the rebuild and still running good
@@ClayRepairs sweet!
@@ClayRepairsdidn’t like the bearings though?
Ya I just reused the stock ones, the aftermarket ones were not good
I got a egr delete
What is the specific method of getting then plugs off the coils? Where do i push and in what direction? Theyre made of very thin plastic for some reason and just pulling does nothing.
So simple
What a great video. I had a rough idea of what I was doing, but still had never done it before. Thank for you for the step by step process of doing everything. Very helpful.
*Promo sm* 💖
So just remove the washer and reassemble correct?
Yep!