Відео

Wow thx it worked and i have a new remote now

mine is doing the same thing with a different model, the hall switch or the safety key has had something happened ill have to try to flip the magnet around. Thank!! i know its 8 years later lol

What model number is this?

THANKS! I just happened to run across this video and used this method to rejuvenate a wired remote that has been unreadable and basically unresponsive for 5+ years. Have patience - it took me 2 tries to get it back in operation but IT DOES work.

THX tho!

Bro, you dont need to use that magnet. you can use any magnet. Just find the right polarity.

This video is still helping!! I'm so happy! It took quite a few times but eventually all of the lines came back. Thank you for doing this video!

Boy I feel dumb. Thank you!

Well that was definitely worth 10 minutes of my time. I tried heating just the LCD from top down 4 times - no difference. Then I focused on the ribbon cable, going bottom up - all is good! Now that I can actually see the numbers for both sides (wireless remote), turns out they were NOT on the same setting.

I have the same model. My treadmill keeps staying at either 10 or 0 Incline on the screen, but doesn’t actually go all the way down. And I would have to manually press up and down a lot instead of just pressing the number I want it to go to. Please help.

I have the same model.. but the machine not going beyond 4 speed... any suggestions 🤔

Posted this comment on Greg’s video too, but I also cannot thank you enough. I inherited my Select Comfort about a year and a half ago. Previous owners upgraded to a new model, said the only problem with the one we got was the screen hadn’t worked in years on the remote. We’ve been going fine by feel, but always wondered what our sleep numbers are (and which remote controlled which side!) - mystery solved. Thank you for this video, all these years later!

home thermostats work the same way ,heat the screen and the heat gets them to work.

My remote reads "DualAir Technology has detected a connectivity error. " I put new batteries in both remotes but they keep reading ...connectivity error. Reference E1 1.4.12B.360" I've checked the hose connections and they are all connected. Please advise!!

Works! Quick and easy. Just heat LCD until black with hairdryer on high heat and then rub with eraser. Saves 50 bucks and took all of 5 minutes.

I have same treadmill but its display not working i dont know why

just remove the magnete an insert on the correct side, because your equipment has a reed switch, somebody insert de magnet on the wrong position

this works, i did it with my wireless remote, the secret is to get the display to get black and then cool, just like new...hairdryer does work!!

It worked for me too. I haven't seen numbers on my controller for years. Thank you so much!

This happens when you don't use an extension cord with the extra ground peg

This worked great! Thanks for the post!

I did this and it worked well. In my case, at least, the benefit was *not* from heating the display. It came from heating the ribbon and then pressing down the point where the ribbon makes contact with the LCD until it cooled. It may be that other people have a different experience. But in my case, heating the display tended to make random improvements (or reductions in performance). Heating the ribbon and pressing it down made instant and clear improvement. Also, if you search other videos for repairing LCD displays, the consensus is that the ribbon contacts are coming loose, and need to be heated and re-attached. But let me add to the thanks of others. I appreciate you making this - I finally have numbers again after 5 years of guessing :-)

Awesome, Informative Video! Thanks so much!!

Yes, this worked for me!! Advice - let the LCD heat for a full minute from THE RIBBON up, then use a cotton athletic sock or microfiber cloth (something smooth that won't scratch) and PUSH the screen and ribbon back together. After the screen returned to it's neutral shade, I set the hairdryer to cold and blew on the screen while MAINTAINING pressure. It took several tries, (not long enough the first two tries) but third time every digit came back!! Thank you for your video, big thumbs up!

This works! Have dual wired remotes, did my side 1st in case it broke. Took it easy and had to repeat 3 times. The other side it worked 1st time! Thanks for the help kwik, really appreciate it!

Awesome I was looking for where to buy a new one, but this worked better. Thanks.

That's pretty cool. Thanks for posting. I'm experiencing the same problem with ours. Magnetic polarity changes can occur naturally or forcefully and have been for millennia. Our planet itself is in the midst of a polarity shift while we type. In any case electromagnets are easier to switch so I'm thinking although your magnet on the key may not be charged electrically, the magnet on the opposite end might just be. Or it could be connected to or influenced by an electrical current, thus causing a polarity switch. In any case good job weeding out the problem and thanks again for the insight.

Great video. I had to heat mine 4 times and get the screen completely black but then it worked great. Thanks for sharing

Thanks loads! It took several times, but it seems to be good as new, and new was in the last century! Lol

I wish this was my only probably with my remote but it just stopped working last night 😒. So now I don't know what to do

I have this same model, my power turns on but treadmill won’t start. Any suggestions?

How do you unfold this model? I was gifted a used one however it was folded when I got it and cannot open it

I followed your instructions and a couple others including Greg's and it worked for me too. Thanks for posting your information. Yep mine were the older wired remotes too. Thanks again saved a bunch of money.

Woow! That worked the first time! Thank you!

Well, I gave it a try since there was nothing to lose, except a little bit of my time, but a good possibility of a $50+ savings to gain. 'Happy to say that $50 is going toward my, soon-to-be, next order from Omaha Steaks. Not only that but the adjustment to my bed, using a now working remote, greeted me, pain-free, as I awoke from my slumber. Whoever you are, thank you for sharing the video. Awesome!

Dude! I don't know if it's going to work for me, but this was the BEST "How to Video," or "Fix It Video" that I've ever seen. Awesome! I've been looking for a replacement remote but can't seem to find an exact match. 'Not sure if a different model would work or not. All the info is ambiguous on the subject. Anyway, I'm going to try your fix. Thank you for sharing it!

Hey, thanks for the video. I watched the one from Mr White also but like you said it is not about the ribbon it's the liquid crystal. It took me about 6 tries. I have a heat gun also and was being careful like you said. Our controller display is like new again with all segments showing, thanks.

Thanks for this, I had to do 4 heat ups, and unplug the pump for a reset. Works great now.

thanku you very much bro

I have the exact same model, and the same problem. It is the safety switch relay on the inside of the console. A magnetic key completes the circuit in the relay. After tearing the console apart, I discovered that the red wire attached to the relay is loose. Tried to solder it but the small metal attaching plate fell off, thus there is nothing to solder the wire to. If you remove the small panel from the back of the console, you will see the red wire. Pull on it and it will momentarily turn the treadmill back on. Currently looking for a replacement part or figuring out how to bypass the relay.

I have this exact treadmill....I went to go on it this morning and the screen comes on, it’s counting still from prior workout, and nothing works. Any ideas?

Did you try resetting it with the on/off switch at the bottom front of the deck?

Thanks to you and Mr. white. I fixed mine too. Gotta love youtubers!

Worked like a charm - thanks!

Thanks, this video is still helping folks! Took several tries, what I think worked best was after getting it hot, I squeezed the display, putting my fingers on the far right and left of the display. Kept squeezing until it cooled down, works great now!

Thanks It worked for me. 😀

Working for me....have done it 2X and got enough back working. Solder melts at ~740 degrees I think...so this must be doing something to the crystal display??

Thanks! Both controllers on our queen sized bed had problems and one display didn't work at all. I had to heat one of the 6 or 7 times to get it to work, the other one only 3 or 4 times. They both work like new now.

Hurray!!! Worked like a charm! Thanks to you and Mr White!!

This worked perfectly! Thank you so much for making this video! Saved me a fair amount of money from sleep number!! Thanks again!!