Відео

soft helmet looks great, but I live in a tropical country and don't want to sweat like hell underneath it !!! You say it keep ear warm... I want to cool them down.

Hi!! Thanks for sharing!! Just a question: which of the two foils (eagle vs. sk8) has better lower wind capability and lower stall speed? I tested the sk8 950 (jibes and tacks level) on flat water (68 kg, 5.0 Strike V2, 75 L) and was struggling to come on the foil at 12-15 knots. Probably the wrong pumping technique, but I found it a really difficult foil compared to my Phantom 1280. Maybe I should have tested the 1050. cheers! Jordan

how do the sk8's compare to the phantom S series?

Doesn't this leave a stub on the rivet shaft, equal to the length of the wire stop?

Thanks for posting! My Arrow hand rivet tool wouldn't fit in the Hobie 16 Mast Cleat, and I couldn't figure out how to install the pop rivet. Great Solution!

Is the surf handle stiffer again like the new handles?

Strut valve and heavier Dacron on trailing edge were not mentioned.

Great video. How’s the canopy tension compare. Looks good

Great overview lads. Thx

What do you think is the best front wing for prone surf foiling everyday waves? is it the 940 s? What fuse and tail wing as well please, Thanks

how much is too much air pressure?

I am excited to get a soft helmet, the leash looks good too.

Where can we find those helmets online? Dont see anything anywhere

Thanks for sharing. The setting gave me even more confidence

you spend more time talking about the rag, and the paper towels, and SO LITTLE TIME talking about the lube! I didnt even get the name! maclube?

Most excellent interview! Wish we had the "wheel house" 8m conditions out front for the 180lb plus crew. 11 m is the go to with 20 knots plus. On the OS 12m most days, then go 10 OS, 11m..................thinking one more in the quiver. When will y'all be in Murray's area for demo rides?

This video is useless .the description "everything is perfect " ,it's the best bla bla blah. That s not what you want to hear in the description . You have alway negativ points and good points. I have a 9 m 2022 XS and 2 FS 2021 The Xs is a really good ,hard bar pressure ,powerful not good low end not for everybody . One of the only kite that can compete with the xr core and Evo duotone for big air .

Great video, but your audio is very clicky and is very hard to listen to.

What is the level of head protection provided by the lining? I’m interested in scootering about 25mph

I have 8 cats, and have done a lot of repairs, over the years. I just did the same thing you did, to my H16, but not quite the same. First, you don't need to put so much epoxy in a cup, and then, the cup should be wider. The deeper the level of epoxy, the faster it will dry. It can harden up all of a sudden, due to heat, generated by the epoxy. Just keep on putting it in the cup, a little at a time. Also, I put only one layer of cloth, tho 3 is better. It is more weight, and not needed, especially if your worried about the wear and tear, of putting on the cat track. And if you use multiple layers, you should alternated between different weaves of cloth. Lastly, you should use 60 to 80 grit paper, on the edges. Then on top of that, finer grit, to blend it in. Also, you need to paint it, since sun deteriorates epoxy. First put on undercoat primer, then the surface paint, on top of that.

more videos please

Tom is that a Milwaukee rivet gun?

what a dick head

This is a terrible harness do not buy. It literally will crush your testicles. DO NOT BUY

I've been wearing the RV Gath helmet for 18 years. A handful of times my Kite Board has hit me in the head, I've been fully protected each time and continued to ride. Knowing without this coverage, a hospital ride was next, or worse. Keeps the sun off of chrome domes and elements out of my ears. I never Kiteboard without this helmet.

Really nice setup...thx for sharing!

AWEONAO¡¡

Stupid. An axe on a concrete floor? Are you kidding me? Why deliberately wasting tools like this when it could have easily been prevented. Certainly a dislike from me!

Probably it’s a stupid question but there is any full harness with a life jacket built in (I don’t know how to say it)?

A good combination.

What size is that vest, how much do you weigh and how tall are you.??????

this was very entertaining. thanks

2:10--Epoxy isn't a catalyzed reaction, like polyester or vinylester. In epoxy, both the resin and the hardener become part of the final product. If you don't mix epoxy correctly, it won't cure correctly. You'll end up with with un-reacted hardener or resin, and the end product will be soft.

Do not let these guys anywhere near your boat. Lol

Very please with the PRO. Used it for 505 racing: in 15+ knots in the ocean with large swell it was comfortable and the waist belt added great lumbar support. In 5-10 knots and flat water I removed the waist belt for better mobility and still had plenty of support while trapezing . The Velcro entry felt secure, with no slipping though a long day of sailing. The hook felt robust and was easy to hook/unhook. I really like the lack of straps and buckles. This is the first nappy style harness I have used and after 2 long days sailing from 5-20+ it was more comfortable than the harness I have used for the last 12 years.

did you do 3 layers? and do let it dry between layers or do you just put layers 2 and 3 on while the epoxy is still wet

thanks sharing, going to try this on my hobie16

this looks great where did you get the equipment

Really great review! Keep up the great work.

great stuff :)

Good idea to drive the motor without the battery