Відео

CASE CX42D and CX50D come with 6 way blades

Steering linkage in front of axle is the worst ides EVER!!! No other tractor I’ve seen does that, there’s a reason!!

Hey if i buy the L2502 cash wat come with it,

I’m getting one!

подарите мне пожалуйста

Over 60,000

Over 5,000 extra for the 6 way blade

Curious, as our local Kubota is quoting 20,375 for the L2502 plus 5750 for the bucket...

819 hours on mine no problems

i have an issue of forward reverse pedal, wont go in reverse ,creeps forward all the time , cant restart now , it is stuck in forward.... 93 hours

i bought one 2020, 700 hours zero problems, feed hay daily, mow, move firewood, rake hay, etc etc. LOVE IT!

I have 2 of these I use at work I mow grass at military base for the air strip about 3 miles long with multiple taxiways thing drives so comfortably and visibility and turning are great on this tractor we got a lot of lights and electrical boxes manholes and other objects around the field and this thing works great around it I pull a 20 foot batwing around with it there both brand new have had a problem with them yet (m6 111) just put tints on it too only goes half way down so I can still see what is under me when it’s darker outside

how would you run a grapple on the loader on this? I don't see a hydraulic hookup

Looks like the L4600, not much difference in specs but the L4600 doesn’t have all the government b.s. No computer, no regen.

I broke my PTO shaft/Transmission the week of Aug. 25,2023. I filed a claim, Aug 25th, and dropped my Kubota off, Aug 26th, at Joplin Tractor in Missouri. They had changed ownership from the family Anderson Tractors to a company based in Springdale Arkansas. The employees still looked to be the same, but fewer. Ethan was the service manager and worked with me through the repairs. KTAC accepted the claim on 29 Aug. and it was approved 13 Sept. 2023. The delay in approval was due to Joplin tractor not submitting the claim. I was emailed by KTAC on Sep. 3rd requesting Joplin Tractor to send the estimate and photos. Initially I was told the repairs would take about a week. I was notified the first week of October that the tractor was completed. I went to pick up the tractor on Oct 6th. In Joplin. I was refused any billing other than my required deductible. While the person at the counter turned to process my debit card, I took a cell phone photo of a parts order for my tractor he left on the desk. It showed a purchase order number 2023642793 dated 09/01/23 at 09:56:22 hours. Handwritten on this was at the top of the page, Parts Ordered. At the bottom of the page were 6 parts handwritten: K2581-11014 a Transmission case, K2581-11212 a Rear Cover for PTO, K2592-11510 PTO Gear Shaft, 67121-56770 an Inner Bearing, 6C040-14730 an Outer Bearing, 37410-16550 a seal. This was not a complete nor final summary of parts ordered, just one page left out for me to see. As I loaded the tractor into my trailer, I saw wet spots under it and Ethan assured me it was because they pressure washed the tractor twice for pickup. Once home I immediately installed the front loader and the Backhoe Attachment on the tractor. Within an hour of use the tractor would not move, but all other hydraulic functions worked. I pulled the tractor back up to the driveway on level ground using my Ford truck and a winch. I carefully looked for a cause including oil levels and linkage disconnect. I found several frame bolts for the Backhoe support frame loose and two missing, linkage for the Speed adjust between High and Low not even hand tight, linkage for foot pedal forward/reverse loose at ball joint at transmission, several other bolts missing or loose for the middle foot decking and transmission mounts. The wire harness for the back of the tractor no longer was secured with the factory clips, rather it was loosely laying across the back of the tractor. The wire harness in one point was pinched between the frame and the PTO engagement switch. In total there were 7 factory wire harness clips not secured to the frame. I took several photos with my cellphone as well as a couple of videos. I contacted Ethan at Joplin Tractor and he requested the tractor return. I loaded it back onto my truck and drove it Joplin Tractor on Oct. 10th. While there, Ethan informed me, they drained the oil from the transmission and found brass filings in the oil which is a wear item they are not responsible for. Someone also tightened some of the loose bolts, but they denied touching anything but the oil. I explained it was not worn before the repairs, but he insisted it is damage I made in the hour I ran the tractor. He insisted they did not touch the Clutch Packs or their adjustments while the tractor was in the shop. I also explained the Transfer Case lock did not work properly. Again, Ethan insisted they did not touch that part of the tractor. I picked up the tractor without oil in it and unrepaired on Oct. 11th. I called the insurance company explaining my problem. At first there were many disagreements about sharing photos and information, but I was transferred to a different agent that worked with me. He requested I consider taking the tractor to the parent office in Springdale. I did file a comment at their website and a reply from Bradley Little also requested I consider allowing them to make good on the repairs. I agreed and drove the tractor to Springdale Ark. on Oct. 12th. I met with the service department, and they told me they had several transmission technicians, but wanted their senior technician to do the repair. Friday 13 Oct 2023, they started working on the tractor. They called me Friday afternoon, 20 Oct 2023, but I missed the call. Monday, I called back and was told the repairs were done. There was a silicon blob stuck in a relief causing the transmission to be stuck in a bypass mode. They had 3 employees drive and load the tractor for several hours to be sure there were no other problems. They were concerned that the 4X4 function was not working properly and ordered a linkage spring that would be in soon. When repairs were completed, they again had employees drive and test the tractor. I picked the tractor up on Oct. 25th. On Oct. 26th I again installed the Front Loader and this time the Box Blade to test the tractor. Within 2 hours I heard a metallic sound and stopped the tractor. While looking for the cause I found the U Joint for the front drive shaft fell off and the drive shaft was hanging under the tractor. I called Springdale Tractor and explained again the tractor was broken. I was very upset and told Bradley Little to take the weekend to look into the matter. When we spoke again Bradle Little stated that they did not touch the U Joint or its shaft and were not responsible for the loss. I am a mechanic of over 40 years. I have built show cars, race cars, custom off road cars, trailers, tractors and a multitude of equipment. From Nuclear Propulsion plants to Airplane Hangers and supporting equipment, personal cars to semi-trucks, I have seen many breaks and successfully repaired and resolved the problems. I explained the first time with Joplin Tractor I felt there was a mistake made but they denied that possibility and claimed it was brass friction plates I broke. At Springdale Tractor again I explained I thought it was a mistake and they agreed telling me there is no brass in the friction plates as they are all steel. The first problem was too much sealant used hardening and getting into the hydraulic oil system, a small mistake easily remedied. Instead, Joplin Tractor lied and placed the blame on me. With the second failure again, they denied fault and placed blame on me. The forward shaft is held on midshaft with a carrier bearing next to the U Joint. To remove the transmission without removing these 2 bolts is unlikely as it would make the job much more difficult. If it was not done at Springdale and instead, they only removed the relief valve without removing the transmission, still there should have been someone looking at the forward shaft when they were troubleshooting the 4X4 problem. Either way I do not care who did it, Joplin or Springdale were responsible for the U Joint falling off. It is normally held on with a splined shaft on one side and a pin shaft and cotter on the carrier bearing side. A U Joint does not just fall off. I am now left with a tractor that was disassembled and put together with such apathy and disregard there were several exterior safety issues. I cannot and will not disassemble everything to make sure their internal work was proper. I do know they did not use factory torque on anything. They did not recheck their work, rather they marked off a box saying they did. My tractor will never be the same reliable tractor I first purchased. My trust and or faith in local repairs for my tractor has long been lost. Even at the corporate level the only comment or response was a file number for my complaint. While the Kubota store in Joplin was Anderson Tractors the family cared more about their work and customers. When a mistake was made, they accepted responsibility and made immediate remediations. Yes, the first time was in 2021. Even then after the service the frame bolts were found loose and one missing. The reason I bought a Kubota, and their service insurance policy, was that Kubota’s were the number one rental tractor for homeowners. The insurance covered all repairs even neglect, to ensure the tractor retained value the entire length of the loan. This is no longer the truth. The service is well below what used to be a Kubota Standard. Customer satisfaction is no longer important to the American Kubota Stores. It is not just my local experience, it is also the Corporate response. Anyone can read from Kubota of Japan how hard they worked to achieve the name. They are proud of their legacy and should be. Times have change. I would think hard before buying a Kubota in the 4-state region of Missouri, Arkansas, Kansas and Oklahoma. My warranty expires in 30 days and I will again be the only mechanic that works on my tractor. The only reason I used the warranty was parts needed in the repair exceeded $2500 dollars. Joseph McLaughlin

Bought one last summer. So true....good for moving hay, raking, other haying duties....we run a 6 star Krone tedder with no hill issues. Great in tight places where bigger tractors don't fit as well. All the creature comfort features needed. Love it!

😜 Promo SM

Great overview

Would you be better buying a m7 130 or a m6 130

Delete and you'll be happy. Unless you live in Cali. Shit system.

short and sweet video , I like those pin sway bars and telescopic arms , would be easier on my old shoulders than pulling the mower around by hand to line up the holes , out of interest what is the : 1 top road speed ? 2 can you put the 4 wheel drive on on the go ? 3 .Is the diff lock electronic and is there also a diff lock on the front axle ? 4 Is the fuel tank low down so I do not have to lift 5 gallon containers up on the hood? 5 Can you put cast weights on the rear wheels ? 6 Does the wet clutch model also have the facility to change gears with a push button on the gear lever like the bigger kubotas? Thanks in advance for your answers

Wow!

what can't a kubota L4701 do

I have both the bobcat e10 and the Kubota u10-5 and hands down the Kubota is a superior unit….

Very nice

I'm having a lift and curl problem with mine any suggestions

I hv this tractor, and I don’t even think my salesman could explain the synchro shuttle , that what advantages it has over regular gear shift and what u could do with it , even manual is sparse in this area - comments ? This video seems to nail it , still need clutch but don’t hv to be at a complete stop , is that everyone’s understanding?

My like❤

Is there any difference from year to year?

Great job sir 👍

Thanks for the clarification.

Great review

45 seconds to wrap a bale?!?! I can stop, wrap and be going again in 15 seconds with my New Holland

Nice review

How much

That body frame looks just like one of them cheap Chinese ones that you can get it may have a caboto engine in it but I bet you can mow the cabota doesn't build it

So no backing up before ejecting?

Is there any way to fit the BH92 backhoe on this?

what does the button above the fuel cap do?

How much are those going for now?

Good review brother!!

I probably learned more in this video than about 30 others combined that I watched. Thanks. Good job.

Do you know if there is any option to get the loader lever closer to the operator? Thanks

I’ve watched about 100 of these videos for the MX and this one was the most informative.

These are a great tractor . I have mx 6000 with 200 hrs on it and zero problems .

Thank you!!

I’ve got the 3902 and looked at the 4701…..for me a 4701 was too big even tho I like the lift capacity better on the 47. Although I did increase hydraulic pressure on the loader for my 3902 😊

Good overview. I’m gonna look at one of these for mostly bushhog/mowing. How is the geared version ? Or would you stick with hst.

How much for this machine at todays price ?

A demo is worth a thousand words.