Відео

3 seasons already? Looking good.

Nice :-)

👍

That's a great looking kitchen work surface!

Get yourself a random orbit sander (and connect it to a vacuum cleaner) and you will have almost no dust in the kitchen ;-)!

Beautiful ❤

Good job👍

If you didn't get them sharp you should look at the back (side) of the chisel, because taking care of only one side won't do the job 100%. The back side of your chisels looks like it could use a little TLC. What you did with the last chisel was not enough, the back side should have (close to the edge) a mirror like finish. I would recommend to start with the back and then move to the bevel...it is a pain in the butt to get the back perfectly even, because the surface is larger so it takes a lot of time.....

Check out Charnley forest stones as a honing stone. Yes, use the diamond stones to sharpen, then hone (final process) on the Charnley. A Norton fine might suffice instead of the Charnley. Stick at it.

The 1200 grit stone isn’t fine enough to get the final polish that you need to cut paper. You should get a 6000 or 8000 stone. I use water stones. Diamond stones are good for getting the bevel established, after the 1200 then go to a 6000 or 8000 for the secondary bevel. Finally a few passes on the strop.

👍

Screwing the inserts into wood is much easier when using an electric drill with the fitting hex insert, because you can push while screwing in, so chip out is less likely to occur.

I couldn't help but to keep looking at your beautiful Arboga drill press ;-). By the way, you should look at a random orbit sander.....

Amazing 😍

Love it!

Nice 👍

Nice 👍

😊 very nice

This looks stunning

Nice job 👍

👍

👍

Just as well, you're stinking rich. With all that resin.😅

I find the installing thread inserts it helps to use a electric drill in slow gear so it is easier to push on the insert while the drill does the "screwing in" part. Just my 2 ct.

👍

AMAZING CANT WAIT FOR PART 2

no i proszę, stolarstwo może być sztuką!!! Jurek, tak trzymaj K&K The best artist between carpenters & the best carpenter between artist!!!

This wood has a very interesting structure. Beautiful final effect.

👍

👍

👍

I heard that squarespace might be a good option for a website with all the bells and whistles for a startup business ;-). You might give it a go.

I hope you got it for free ;-).

👍

😍 P r o m o s m

Good video shame about the outcome but I’m sure you won’t be making that mistake 😢again

I like the concept of looking underneath :-).

Nice 👍

Love it. ⏰

Temendous!

Well, that's a heart breaker. You have planned to do that job all year and it's rectification has taken up your summer. I can imagine how you feel. Your tenacity and ingenuity in attempting rectification is truly admirable and I am sure you will eventually overcome. What a tragedy. And you have put me off any hobby jobs involving resin. Completely...

Blimey Jurek, what a mess. But so satisfying to see it finally come good. A real test of your tenacity, ingenuity and just pig-headed determination. We’ll done, son👍

2You could have used tar, the effect would have been similar ;-) - my wife's advice ;-).

Now you know, why I am not a fan of resin ;-). Did you (by any chance) ask the manufacturer if waiting or adding something else will eventually just make it hard? Maybe it would have been a good idea to follow Def Leppard's song ("Pour some sugar on me") with a slight change .....and pour a little Viagra onto this resin....maybe it would help ;-)

Jurek! nie jesteś pierwszy. In the former time we have used poliurethane paint without hardener (?! due to opinion of salesman ...) all the best Chris & Kate

thanks for sharing the downs as well as the ups!

Great job 🙂

Nice 👍

To be honest I think your chisels are pretty good, as long as you can get them really sharp you won't see much improvement in other much more expensive chisels.

Jerry, I never supposed, that you stay wood-Master, really artist. Luna also v.helpfull!!! All the best Chris