Відео

Well, thank you. Yes, it does a very good job of edging! Thanks for stopping by!

Thanks for the feedback. I do appreciate that!

You are welcome! Always enjoy getting feedback. Thanks for watching!

Oh, I’m sorry to hear about your loss. But I’m so glad you found the video, and that you found it helpful. Thank you for sharing your story.

You are welcome!

Hah. Better relate than never?

Hahaha. So funny! Glad the video came in useful for you. Hope you like the shredder. It’s so good!

You are welcome!

Glad to hear that! Appreciate the feedback.

Yeh, it’s a nice little product! Thanks for watching!

Yeh, the instructions leave a bit to be desired! Glad you found the video helpful. Appreciate the feedback!

I don’t think anyone’s mentioned that issue. Is it leaking at the faucet or when the water enters the hose reel?

Glad it helped! Thanks for watching.

Yes!! Love hearing that!

Yeh, not all bikes are going to be setup the same way.

@@daddoesvideos I found the problem and I need to buy an attachment to clip on

@Yuraxa ah, glad you figured it out!

Good to hear! Appreciate the feedback. And, thanks for watching.

Hah. Glad you found one that worked!

Hey there. Yeh, the pin shouldn’t be feeding up. If your door handle is on the left side of the door (and you are opening toward yourself), the straight part of the hinge should be on the door jam. And it’s the opposite if the handle is on the right side of the door. Either way, the pin should be on top of the hinge.

@@daddoesvideos So I’m really confused now. The handle is on the right and it swings inward. The hinges that came on the door from the factory had the flat edge hinge on the door (the cutout is square as well)… and the rounded corner part is on the door jamb/frame. This is confirmed right as well by the cutouts being shaped the same. The hinge pin was normal, with the head on top and pin going downwards. Now this new hinge, as you mentioned only closes fully in one direction. If I take the fully closed hinge and put it on the door with the exact same rounded and square parts where they should be- the screw holes line up perfectly with the original ones. Only problem is… the pin is upside down- the head is on the bottom and the pin goes upward… put it in the bottom and hammer it upward to go in. I tried everything flipping the hinge this way and that way, trying to separate the two wings and flip them backwards or backwards and upside down to try and make it work…. there is only 1 way it can go and work.. and it’s with the pin upside down. So I’m stumped. I already replaced the hinges regardless and the door still works perfectly and lines up exactly as it did from the factory- opens and closes smoothly; no weird gaps, sticking… and the bolt and handle latches catch perfectly. So I guess at this point we’re going with that since functionally it’s great. I would just really like to understand what happened here out of my own curiosity and if I could have done something that I didn’t! Thanks for the reply! PS - my question is this- I get why the part on the door is flat- so it has the most surface contact with the door and the edge is flush with the flat edge of the door. Now why have a rounded cornered leaf on the other side? Why not just have it square as well? At the very least you could then flip it either way and it lines up with the notch. Seems stupid to me to have each wing different. What’s up with the rounded anyway? Aesthetics? So odd.

@poisonfortheweak yeh, that’s weird. Have not run into that. If it works, I’d just go with it. Strange.

Glad it helped! Agree. Don’t like it when people take so long to get to actual content you can use!

Personally, I chose sand. Either works. Yes, it’s hard to move after you fill it.

There isn’t a produce filter in the Frigidaire gallery French door fridge?

@daddoesvideos Yes, it is. I just bought one, and it has the produce filter

@@inix9748 interesting. must be a new feature. The only filters on mine are the air filter and water filter.

Lol. I mean, yeh, the dirtier the stove top is, the more effort you’ll need. But it’s a really good product.

Yeh. You have to remove the bolt that holds the plastic cover. Then, there’s a screw underneath that you have to turn clockwise to tighten. Perhaps I’ll do a video about this, specifically.

Lol. No doubt! Glad you stopped by!

Love hearing that!

Appreciate that. Thanks for stopping by!

Could be. Just depends on how the house was built. Mine was built in 99.

I’m happy the video helped! And yeh, definitely would have been at least $500 bucks for the repair man to come out and fix. Thanks for watching!

Excellent! Love hearing it helped!

Huh. I don’t remember having an issue with that part. Are you aligning the ball so it fits into that little nub on the bracket?

@@daddoesvideos apologies, it turns out that it was a manufacturer defect. I had to wideb the opening to the mount but about an 1/8 of an inch and it popped right in. Thank you for your reply, I watching like 4 other instructional videos and they all skipped that part too, I was going insane lol thanks again

@scottkoenigsmark5739 Ah, go figure! Yeh, I could not remember having any problems for the life of me! Glad it all worked out for you.

Ouch. Glad you didn’t go through all that trouble! Thanks for watching!

Yes! Love hearing this! Glad it helped.

Love hearing this! Thanks for the feedback!

Nice! Glad it worked!

You don’t have to do anything special. It will automatically let out a bit of line when it needs to.

Glad it helped!

Lol. Better late than never I guess!

Not that I’m aware of. Every keypad I’ve ever had/seen needs the code to open or close the door.

@@daddoesvideosinteresting. Thank you. All three of my previous homes dating back to the late 90’s you just hit the button when it’s open and closes. Greet feature if you leave the door open and ask the neighbor to close it for you and don’t need to give them your code 😊

@attackb5349 Hah. Yup. You can always install a Chamberlain MyQ remote garage door opener. Takes less than 20 minutes to install and you can open and close your garage door from your phone from wherever you are.

It is. But that just how these batteries operate, which is different than a car battery. If you put a reminder on your phone, it’s not bad. You can always get a maintenance-free battery, too, to replace it.

You are welcome!

Yup, that’s exactly what it is!

Glad it helped!

Love hearing this! Thanks for watching!

Hahahaha. Glad it helped!

Not so sure about that, but appreciate your perspective.

Hey there. It’s been perfectly fine. I’ll probably do a video about it soon since I’ve had a few others ask, too. Appreciate it.

You are welcome! Glad it helped!