- 10
- 79 953
RideLifeWithGrace
Приєднався 19 січ 2017
Simple things that makes life easier and more enjoyable.
How a MOSFET works - (easy and practical)
How a MOSFET works.
EASY to understand with practical application.
If you are inclined to support me you can use the following link from Banggood (goo.gl/zFf835) before you make ANY purchase and i will get a very small percentage (no extra cost for you).
I bought the majority of my electronic components from Banggood because of the low prices, no shipping costs, no minimum order and helpfull personel.
The tested MOSFET: goo.gl/su4EiG
Small Heatsinks for MOSFETs (TO-220): goo.gl/Y1XV1s
Small Heatsinks for MOSFETs or ICs (with glue - very practical): goo.gl/tWcbHQ
Check here how i made my ATX Variable Power Supply.
Part 1 (Introduction): ua-cam.com/video/DzTEjofczFU/v-deo.html
Part 2 (Adjustable + Hot Air Soldering Gun): ua-cam.com/video/F9QUPBNoNmY/v-deo.html
EASY to understand with practical application.
If you are inclined to support me you can use the following link from Banggood (goo.gl/zFf835) before you make ANY purchase and i will get a very small percentage (no extra cost for you).
I bought the majority of my electronic components from Banggood because of the low prices, no shipping costs, no minimum order and helpfull personel.
The tested MOSFET: goo.gl/su4EiG
Small Heatsinks for MOSFETs (TO-220): goo.gl/Y1XV1s
Small Heatsinks for MOSFETs or ICs (with glue - very practical): goo.gl/tWcbHQ
Check here how i made my ATX Variable Power Supply.
Part 1 (Introduction): ua-cam.com/video/DzTEjofczFU/v-deo.html
Part 2 (Adjustable + Hot Air Soldering Gun): ua-cam.com/video/F9QUPBNoNmY/v-deo.html
Переглядів: 476
Відео
Logitech Z313 2.1 Speakers (PSU Replacement)
Переглядів 21 тис.7 років тому
Logitech Z313 2.1 Speakers Repair Faulty PSU and Replacement (0:13): The problem of the old PSU (2:25): Testing the Amplifier (STA540) (4:26): Quick unboxing/Specs of the new PSU (5:51): Testing the new PSU You want to buy something similar? I really like the Bangggod site (goo.gl/zFf835) for various reasons: ships worldwide, great prices, no extra shipping cost and no minimum order !!! Similar...
Download and Install Windows 10 (100% Legal - 100% Working)
Переглядів 4417 років тому
Download and Install Windows 10, directly from Microsoft. Use this link: www.microsoft.com/software-download/
"Elaborated" ATX Bench Power Supply (Part 2 - Adjustable + Hot Air Soldering Gun)
Переглядів 1 тис.7 років тому
Building an "Elaborated" ATX Bench Power Supply (Part 2 - Adjustable Hot Air Soldering Gun). This part describes how to convert the ATX power supply to adjustable (0-30V / 0-5A), by installing a buck-boost converter and (the surprise!) how to attach a hot air soldering gun with detailed information, procedure and parts. Quick Links: (0:14) Testing the first Buck-Boost converter (Not recommended...
"Elaborated" ATX Bench Power Supply (Part 1 - Introduction)
Переглядів 3277 років тому
Building an "Elaborated" ATX Bench Power Supply (Part 1 - Introduction). This part is NOT meant to be as a guide or how to video, it is more like a presentation. I am also testing my “low budged” camera, which appears to be “not good enough”, especially at night. It doesn’t matter how much light I provide, the shooting at nigh is not good for my taste, I probably stick with day shooting. But it...
The complete Setup-and-Run guide of STM32F103C8T6 or similar
Переглядів 41 тис.7 років тому
How to setup STM32F103C8T6 for scratch-to-finish, including USB setup and Arduino IDE. You will need the STM32F103C8T6 board AND a USB-to-Serial Adapter. The Generic STM32F103 Pin-out Diagram: goo.gl/uLBmE4 Download Links for each step. Step 1 (0:15): Download and Setup Arduino IDE: goo.gl/yPNVju Step 2 (4:50): Download and Setup STM32 Drivers: goo.gl/24SrI1 Step 3 (6:02): Download and Setup US...
How to build your first linear Power Supply!
Переглядів 1,1 тис.7 років тому
Detailed step-by-step guide, both theoretical and practical. Based on LM317, DC/DC conversion. The LM317 is a "classic" component... paired with classic music! 0:31 Intro. What is the LM317. 1:39 How to read the basics of a datasheet. 4:38 Circuit connection (part 1). 11:40 Calculate "Output Voltage". 13:03 How to make a potensiometer of any value you want. 13:51 How to connect 2 Pots: Coarse a...
How to fully disassemble, clean and re-paste your PC
Переглядів 1107 років тому
I recommend to do a "full service" to your PC every 3 years. This is how a did mine, represented in a way that you can clean yours also. Note: In some segments i use 4x video speed. You can see those segments in real time by using the Embedded UA-cam Tool: Settings - Speed - 0.25. You can get the thermal paste HY880 in this link, you can even get a single one for test (no minimum order, free sh...
Power Supply Repair - Common Problem of a SMPS
Переглядів 14 тис.7 років тому
How to repair a common problem of a Switched Mode Power Supply (SMPS). Easy and analytical process with "Tips and Tricks". Note: In some segments i use 4x video speed. You can see those segments in real time by using the Embedded UA-cam Tool: Settings - Speed - 0.25. 0:08 Overview of the Power Supply. 0:57 Problematic capacitors and how to choose the right ones. 3:43 De-soldering/Soldering proc...
Introduction to electronics: Ohm's Law
Переглядів 697 років тому
Simple and enjoyable understanding of Ohm's Law.
Looks like i found the solution for my problem z313. Hopefully mine is psu problem also.
what if the channel balance is off?, where can i get that potentiometer (7 pole)
OHH MAN!! YOU HAS SAVE ME! I THOUGHT THAT I COULDN´T USE THE STM32 ANYMORE, CUS THAT MESSAGE SHOWED WHEN I UPLODED MY CODES... THANK YOU SO MUCH!
Hola amigo a esta plca se le puede poner una fuente de 16 vol gracias espero me responda
Still works in 2023 bro. You rock!!
Thanks matey, almost 6 years after posting, this is still relevant, as Logitech is still using that dodgy PS. Works like a treat now. Was wondering why you did put the voltage to it's maximum, instead of leaving it at 12V ?
La salida de esa fuente de alimentación, la original son 12v, 4 A, es también corriente alterna (AC), si la cambio por una de corriente continua (CC), ¿Funcionará?
no note work I tried it on a dc charger and the( TDA) sound ic blew out.
Thank you for this excellent video!
Hi.can u pls tell me IC number?
Usb not reconizef error
Sorry 1.8.1 , which u r using
Wi it make any difference as I am using Arduino IDE 1.8.19 version the latest. Should I try with 1.8.8
I will try as per your demo. Seems it will work by provifin the res.
The problem I was faving in last, that port not visible and Usb malfuction
After 4 years - this is still the best video out there for setting up a BluePill in the Arduino environment. I was just sending a link to a friend and thought I should make another comment.
annoying BGM
My psu also burned out thanks for the reference
It seems you solved my problem ...Thanks...
Hi RideLifeWithGrace, I have a Logitech Z533 that burned out the power supply. Since I don't know which (TPA) audio amplifier is installed on this Z533 system, I don't know what power supply and what DC voltage I should use to replace the original. Thank you for your help as I have the Z533 system out of action for a long time and after watching your video I was hoping to be able to use it again... Forgive my English, it's not my native language.
If I wanted to read how to do it I would have found the info somewhere else besides youtube .I just wish there was a way to block users who post this bs music and text crap from showing in my search results . Alas all I can do is thumbs down and move on
I have tried as shown in the video but i am still getting same error please help Failed to init device. stm32flash 0.4 stm32flash.googlecode.com/ Using Parser : Raw BINARY Interface serial_w32: 115200 8E1
Thank you for this excellent video!
Perfect explanation without leaving any minute doubt
Hey you deserve more than a thumb from me if possible I give 1000 thumbs. Thanks for your time and great work😘😎😊 Nice video.
Like the guy in 'FARGO' said, "SPEAK YA MUTE!"
Hello, nice video ! i have a ATX PSU that has no output but no problem with the primary side, any idea on how to fix that issue ?
Hi ! Solved my problem thanks to you ! After seeing your video i bought a power supply in Bangood and replaced it like you did. It works really nice ! Thanks :)
fucking dreadful noise there
Thank you 🙂
Excellent tutorial. I tried for hours to get a bootloader on my first STM32 with no success..... Used your method and within half an hour was up and running. Thank you
are you mad? 15min for replacing a capacitor?
love it
Very nice I want to shift this ua-cam.com/video/oHTzcLUDKEI/v-deo.html on your controller please help and guidance needed....
Thank you so very much.. this is realy greate video ..perfect..
How do you fix grounding? Mine bont have grounding line and I connected woithout. Now I have buzing noise and I believe it is because of grounding.
i have same problem
Do u solve it?
Wow this is crap. You show one common problem with a SMPS. So not really showing people the repair side of a SMPS. What about the other common problems like feedback circuit or induction problems or diode problems and others?. Everyone seem to say if a psu is dead it’s capacitors. It’s always capacitors. If that was only true then my job would be easy.
Great Video but with annoying background music.
I have Z323 with same problem but the diode is SR3100. I take out the dead diode and it is working with one diode. :)
USB Boot-Loader not found.
Voltage regulator link is not working
I thank you for the great looking power bench supply. With hot air gun. Is there a part 3# and will it work to? So I can build one for my own.
can u help me i have same issue what PSu should i buy and can you teach me how to put it on?
great video i'm only new to the micro-controller scene and this video helped out greatly keep up the great work.
Sadly u are inactive :(
pretty awesome guide thanks for uploading. one issue that I get is that when I try to upload a simple "blink" program I get "access denied" message :( any ideas? My computer is able to detect the STM32 board as Maple something device but I'm not able to write onto with the bootloader
What pin you using for blink? PC13 or 32 in IDE? It should be pinmode(32, OUTPUT);
This is NOT a linear power supply. This is an adjustable voltage regulator. Do not confuse the two.
isnt it bad to put a stronger psu in ?
No it isn't the PSU will supply 12V until you hit it's max current. If you don't hit that max current then any two sized PSUs are functionally identical.
Thank you for the useful video that can be quite helpful to those who are not familiar with Arduino as well as the Blue Pill board. Despite the fact that there is no narration, it's easy to follow all the steps. While you have meticulously described each step, it is a bit of a surprise that you have not mentioned the step for opening the Blink file from the examples. At 9:16, you are editing the Blink file and from the screen one understands that the Blink file has been opened. Looking forward to your future videos on interesting projects with the Blue Pill board.
Thank you
U just wasted 3 min 35 sec of my life span in installing arduino ide. But the video is amazing and you deserve a thumbs up.