Відео

🤘👍🏿

🤘👍🏿

I am looking at buying a Pirate Midi to allow me to simultaneously switch the channels on a 5150III 50W (which has 5 pin midi) and a Ceriatone clone of a Friedman BH100 (which has a TRS latch style switch, as I understand it). I had understood that the Bridge 4 and 6 are advertised as being able to control channel switching on certain non-midi amps: "Switch inputs and outputs can be used to control your non-MIDI gear, like the auxilliary footswitch on a delay pedal, or the channel switching on many amplifiers." Is that right? Or do I need the CLiCK in addition to a Bridge 4 or 6? Thanks!

Nice, but i couldnt find a Shop to buy the Pirate Midi Bridge

Setting up a bridge to be on midi ch1 for me would be a bad idea potentially. Pretty much every midi pedal is on ch1 by default so to me it is way better to shift your solid pedals in the network away from ch1. leave it for guest pedals with a few basic banks to call up PC commands for that guest pedal and your commands to do control remotely will remain safe n sound. There are also plenty of apps out there and other gear that force you to use ch1 especially boss stuff for Sysex so yeah again best to plan well in advance the choice of channels or you end up paying for it down the road reprogramming everything again.

This might be a dumb question but can the flexiports be used to change amp channels?

Could this be used to toggle a vertex boost on and off?

You make this so easy to understand! Great video.

Thanks a lot for the video! And while technically it's not exactly a cross fade between the two effects, it's still a very nice feature that relies on Bridge OS' rich expression pedal control options. One just needs to bear in mind that in this scenario when you change the mix on the first effect in the chain (my educated guess is that Brig runs into the Cloudburst ;), you effectively change what you're feeding into the second effect in the chain. In other words, if you set the mix on Brig to, say, 70%, what it means is you're going to send into the Cloudburst 30 of the dry signal and 70% of the repeats. This is what you will reverberate by the Cloudburst algorithm, AND this is also what would be the "dry" signal for the Cloudburst. In order to make it work in a "true" crossfade mode, you need to either split the signal before both effects, feed them both with the duplicate dry signal, adjust the mix as described in the video, and then parallel-mix the output of both of these effects. Or, you can use a proper parallel mixer, such as GFI Diaphony or GigRig Wetter Box, and control the mix either via an expression pedal, or (in case of Duophony) via a ( Bridge:)) MIDI controller.

Can’t wait til I save up for a Bridge6 and Morningstar ML10X. I’d love it if you guys made a more affordable competitor to the ML10X with similar features 😃

Can i switch amp channels ... my amp use relay for this... bit i want to switch with the quad cortex midi

Im on southamerica specifically in colombia... how much and where i can buy it

Hey fellas you are doing God's work here. Keep it up! What's the latest on the setlist mode we've heard of?

Any updates on setlist mode?

Hello, please advise polarity of 9V power jack as it does not appear to be documented anywhere.

I use keyboard macro software on macOS and Windows. I will put a small delay between keystrokes. Does your software support that?

I would very much like one of those midi spectrum snake grid gizmo Sam, that’s cool as hell!

Fabulous book, really well ties together all the basics one could need, valid for midiots to mad scientists.

My sincere congratulations to the entire Pirate MIDI team for all of your hard work that you put into making BridgeOS 2.0 a reality! It's been an honor and a pleasure being part of the beta testing process, and I am sooooo excited to see that the new platform is now live and public! Please know, that we as a community truly appreciate what you guys are doing. We may be whining here and there in the chats during the beta test, asking tons of stupid questions and making crazy suggestions, but we really love our Bridge controllers and hope to see the product develop further, as this is such a promissing and flexible platform! Cheers!

Thanks for the MIDI demo! Never used MIDI, but I’m looking into foot switches to change presets for this pedal cause it’s a nightmare pressing both buttons on the pedal simultaneously live. Love the sounds of this reverb and its small footprint, but made me want to break a window when I realized you couldn’t “tweak and save” easily like 98% of preset reverb pedals lol. If you need to adjust a preset on the fly live Without MIDI, you have to go back to live mode and change all your parameters to meet the preset, then tweak, then save. Maybe version 4 will let you adjust preset parameters on the fly without spending $300 on a midi switch, fingers crossed lol.

If you're new to MIDI, check out our new eBook "Tones & Technology: Mastering MIDI-Controlled Effects Pedalboards" - it's not brand-specific and it'll guide you through beginner to advanced MIDI techniques designed specifically for musicians using pedalboards. www.tonesandtechnology.com

I'm a software engineer with 15 years of professional experience and I coded since I was a child. And I struggle with MIDI. Not because it's too complex to comprehend, but because it sucks so badly. It's a bunch of legacy stuff that doesn't do what you expect. Oh, your looper supports MIDI clock? You can then time perfectly when to start and stop the loop. Wrong, because the MIDI clock has zero information on where a measure starts or how long it is. It only knows the time in between two beats. And then every pedal has its own definition of what means what, let alone that many are a pain to program. Loop switchers often can only send one command at a time unless you spend 100s of dollars. Wanna switch on the delay for the solo? My Plethora X5 requires that you know which bank you are in because you need to know which slot the delay is in. Just customize the protocol for each bank? They didn't bother to add that option.

Hi, where to download this?

Really well thought out. Everything you need, just barely enough I/O. Would've preferred 3 flexi ports on board but... just enough to keep it in consideration.

Wow

How do the presents and the algorithm changes interact? If you've got preset 3 selected (say it's a mod algorithm), and then change to a different algorithm (spring for instance), does it turn preset mode off, or keep the preset knob settings but change the algorithm? It looks like the present LED on the Revelation is remaining on in the video after you change the algorithm? Am I missing something?

Can the usb port of the Conduit send midi messages to nux mighty plug pro? Thank you.

hi any plan of supporting fractal scenes and presets?

Thanks, heaps. i've been looking for something like this! I'll now be spending my week off re-programming my whole set-up!

This whole series is great. I absolutely love my Bridge 6, just learning the MIDI ropes, and even though I’m not using Strymon, these videos give me many good ideas for using it with my BOSS, GFI, Line 6 setup. Especially the expression pedals. You might even consider a separate generic video that just covers ways to use one, two, or even three expression pedals.

This video will be replaced soon. This process is old and our firmware updater app is available from www.learn.piratemidi.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

If you're new to MIDI, you can download our free ebook which covers the fundamentals of MIDI, common issues, and some handy reference diagrams too! www.tonesandtechnology.com

Is the Bridge4/Bridge6 able to save presets to access the Cloudburst power up modes like spillover and dry kill on the fly?

Seriously considering buying bridge 6. Confused how the setlist is created or edited. Is it also in the pc editor.

Hey Pirate Midi Team, I think about purchasing one of your controlers for my HX Stomp, quick question on the flexiports: Can I just use any two button TRS Footswitch as additional switches? Thanks for the explanation videos

Hey friends, you can download this bank template for your BRIDGE4 or your BRIDGE6 at our Discord server: discord.com/channels/1026256363174764647/1230465616222359606 If you haven't joined the server yet, there's a link in the video description! (then come back here to use this link)

Great practical explanation video, those types of videos are extremely useful, given how complex and multi-faceted Bridge controllers are. Keep'm coming! A quick question: is it possible to tell Bridge via Sequential switch to ask the Expression pedal to send two or more of the Bank messages from that stack?

That's really useful, thanks! I'll try to set up something similar with my El Capistan. Just one question: On the first button where it says "Mix" and in the next line it says "> PreDelay" (your next step) - where do you set that in the editor? Edit: I just realized that this is one of the global device ui modes and that I am using the other one where this is not possible.

Yes! 🎉

This is cool!

Just one is not enough. You guys need to make a version that has multiple outputs for multiple devices. I would also recommend a USB hub just for pedals that has a 9 V supply. Nobody’s making that.

The customizability on these controllers is insane. I recently bought the bridge 4 mostly because its size, but so far it has exceeded my expectations by leaps and bound. Im strongly considering getting a bridge 6 for another board of mine. Very impressed.

Got a bridge 6 on its way. Can't wait to integrate it into my board!