- 5
- 126 407
Auer Design Hockenheim
Приєднався 12 сер 2019
On this channel I share some of my projects with you.
Have fun watching!
Visit me on: auerdesign
Have fun watching!
Visit me on: auerdesign
Re-Upholstering the Motorcycle Seat - On A Budget - Kymco Zing 125
Recently I bought myself a motorcycle from a good friend.
Since this will be my first one its better to start with 12hp.
The first thing I had to do was repairing the seat. The neighbors cat had to much fun with it...
Because a new seat was to expensive for me, I decided to do it on my own.
It´s also not possible to get just the foam so I cleaned it as good as could.
The foam still doesn´t look good, but it´s clean. Trust me!
This was also my first time with a sewing machine. It´s actually not that hard so you can do it to!
Stay tuned for more Videos!
Soundtracks:
chilly by Barradeen | soundcloud.com/barradeen
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/by-sa/3.0/deed.en_US
Morning Routine by Ghostrifter Official | soundcloud.com/ghostrifter-official
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/by-sa/3.0/deed.en_US
12 Months by Patchworker f.k.a. [friendzoned] | soundcloud.com/patchworker
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/by-sa/3.0/deed.en_US
Since this will be my first one its better to start with 12hp.
The first thing I had to do was repairing the seat. The neighbors cat had to much fun with it...
Because a new seat was to expensive for me, I decided to do it on my own.
It´s also not possible to get just the foam so I cleaned it as good as could.
The foam still doesn´t look good, but it´s clean. Trust me!
This was also my first time with a sewing machine. It´s actually not that hard so you can do it to!
Stay tuned for more Videos!
Soundtracks:
chilly by Barradeen | soundcloud.com/barradeen
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/by-sa/3.0/deed.en_US
Morning Routine by Ghostrifter Official | soundcloud.com/ghostrifter-official
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/by-sa/3.0/deed.en_US
12 Months by Patchworker f.k.a. [friendzoned] | soundcloud.com/patchworker
Music promoted by www.free-stock-music.com
Creative Commons Attribution-ShareAlike 3.0 Unported
creativecommons.org/licenses/by-sa/3.0/deed.en_US
Переглядів: 2 990
Відео
An Oak Pencil Case
Переглядів 12 тис.5 років тому
In this video I show you how I made a simple wooden pencil case. Please enjoy!
Retrofitting heated seats ll VW Golf MK4
Переглядів 111 тис.5 років тому
In this video I show you how I retrofitted heated seats in my VW Golf MK4. Way cheaper than the original! If you're interested in the phone mount, check out my insta page for more pictures. auerdesign
Upgrading and restoring the drill press
Переглядів 1815 років тому
In this video I show you how I improved the scale on my drill press. It was hard to read and adjust. Since I was already working on it I repositioned the switch and did a bit of cleaning.
Wooden Paddle Board
Переглядів 1575 років тому
In this video I show you how I made a simple wooden paddle board. Since it´s not hardwood it´s mainly designed to serve as a pot coaster or a serving plate for cheese and meat. I hope you enjoyed my first video!
Great vid. Thank You
Terrible, terrible design, terrible technique, terrible and unsafe usage of power tools, too bulky of a piece of wood for the amount of pencils that would fit into it… just terrible all around…
I just wasted 2.30 mins of my life
Sry
Very Nice I liked the barrel hinges. I am thinking of making a pen case myself. I prefer rounded ends for the pen slots I will have to buy a 5/8 mushroom head router bit. I did like the cardboard box that was a very professional touch. Great video Thanks.
That would be a perfect present for my parents. Great Job!
Wow, what an amazing restoration job! 👏 I'm seriously impressed by how you've managed to bring that drill back to life with such attention to detail. The level of cleanliness and care you put into it is truly admirable. Your video kept me hooked from start to finish, and it's so satisfying to see the transformation. Your craftsmanship is top-notch! Can't wait to see more of your incredible work. Keep it up!
How do you know where to place the holes for the barrel hinge?
You made it look quick and easy and I hate you for it... Damn... Those freaking springs... And the cables for the seat are short...
What the name of music
Riddle Heights - Archilecto
My current heated seat works just fine, but the fabric has seen better days-could I use your technique to just swop the fabric from a not heated seat?
Normally the heating mat is sewn to the seat cover. So that could be a lot of work.
@@auerdesignhockenheim2227 but if not that should work right?
I guess. Let me know if it worked!
What router bit do you use for the pen tray?
I used a 8mm round nose bit. To enlarge the tray I did two passes and slightly moved the fence.
Can you place the heated pads under a seat cover instead of the actual seat?
I guess you could. Depends on the thickness of the seat cover. The pads can get really hot.
I brought seats. Used 2000 GTI. from the Pick-n-Pull ,,those are GTI seats...!! regular Mark 4 GLS or GL,, heating element is on the bottom pad ,,great video nonetheless, could have been better without music but good nonetheless. You did leave out wiring, electrical connections, circuit protection issues... personally for me,, I was only looking back at this .as to see if I could catch a glimpse of how to wire these GTI seats into regular mark4 2002 ..the connectors do not match GTI ../ standard mark4Gls GL thank you for the video
What switches did you use? I want to make this mod in Seat Leon 1, but without the factory original switches, because that would mean no cup holder for me
I used the universal switch that came with the set (7:35).
Do you still have your fingers?!
Yes ✌️
Nice man, where can I find the wiring diagram?
Where do you get this kit
I'd look on ebay or alibaba for them :)
Why do people feel compelled to add iritating music to their videos?
Turn it off then.
@@auerdesignhockenheim2227 💀
Are you still able to use the 5 step seat heater switch?
I tried to use the oem part but it didn't work
Can you just show us how its going with wire all over to the switch to the baterry cuz i dont now how to dot, Thanks for Video ❤️
I really should have included that. When I take apart my Golf again I'm gonna make a video on that! Do you also have a mk4? And do you have a multimeter by any chance?
Nice work!!
Pourriez-vous faire d'autres vidéos avec votre Kymco zing 125 s'il vous plaît que ce soit amélioration au réparation
Wire everything up at night?
Cause you will run out of time... 😅
Whats the deal with the phone mount?
I converted the blank switches to a mount.
@@auerdesignhockenheim2227 cool, that’s a good use of them 👌
@@auerdesignhockenheim2227 I'm driving a Golf mk4 myself and I really like your phone mount idea! Do you have a picture of it without a phone mounted by any chance?
@@niklashulsenbeck4469 Hi Niklas, i just added some pictures of the mount on my new insta page for you! instagram.com/auerdesign/
i checked the link for eBay but it says it doesn't work with my golf. I have golf mk4 1.6 16v 2001? any help?
I don't see why it would not work since these are universal.
This video is better on mute
Just ordered this kit to install in my grand am for a nice project. I see you installed in a year go is it still all working good still just curious thanks for the vid.
Yes it is still working fine! :)
@@auerdesignhockenheim2227 Awsome
Top 👍
Does anyone knows the song?
If you can tell me the time in the video I can help you out. I used a few soundtracks from the you tube creator library. 😊
5:25 :3
Vertigo - Bertysolo :)
Thank you! <3
Good Job!! Excuse me, where did you buy the system to heat your seats?
It´s a universal kit I bought on ebay for ~40€
good job ... please, don't you have the original numbers from the seat covers and foam? I have the same seats and I would like to see if things can be found for it.
Well I got the seats from a scrapyard! ^^
Next; ventilation retrofit seats :)
I thought about that too! :D
@@auerdesignhockenheim2227 do it, it will be hot video, and no one done it on golf :D
Yeah, it would be fantastic
Hello great job! I have a question please, i bought an mk4 Bora with 2 airbags (without side ones) , it should be airbag cable under seats? , because i don't see them. Thank you
I guess there are no cables then :) Anyway it is still a good idea to disconnet the battery. You never know...
@@auerdesignhockenheim2227 okey good idea, thank you for your reply ))
Where does it get the electric from?
I basically "stole" the ignition plus and steady plus from the radio. You get mass from one of the mass points on the body.
i did this about 4 years ago on my 1.6 SR, man what a task it was
Ein besonderes Geschenk! Professionelle Handarbeit!
Wow, you dont have a work bench to take the seat apart?
Well, the seat was easier to maneuver on the floor :)
Wow, great video!
looks really good
amazing
nice video
This looks great, however, i would love it if you guys put the instruction for the wiring of the seats.
Yes i know. I might get heated seats in the back and then i can show how to wire it up. The wiring was there before because I changed the seats.
@@auerdesignhockenheim2227 Interested in seeing how you tap into the wiring harness to power the rear heated seats. And frankly, for the fronts like you did in this video. I'm looking into retrofitting rear heated seat pads and the OE wiring from an Audi A6 for rear heated seats in my mk4 Jetta, but I am waiting for warmer weather to perform the work.
Ein superschönes Etui. Sieht edel aus und ist qualitativ hochwertig in Handarbeit gefertigt.
Fantastic job